• 공업화학
• /
• 제3권2호
• /
• pp.349-359
• /
• 1992

염료속에 함유된 무기염(NaCl, $Na_2SO_4$)의 선택적 제거를 위해 역확산과 역삼투를 결합한 방법과 nanofiltration(NF)을 각각 이용하였다. 역확산에 의한 염의 제거율은 염의 종류에 따라 1회(one pass)에 1~30%를 나타냈으며 염과 염료의 분리비는 10~500의 매우 큰 값을 갖는 반면 염료의 손실율은 0.3% 이하였다. 염료용액을 순환시킬수록 음이온인 $Cl^-$ 이온의 제거율이 증가하고 양이온인 $Na^+$ 이온의 제거율이 감소하는 도난투석현상이 관찰되었다. 또한 공급용액의 유속이 염의 제거에 미치는 영향을 살펴보았다. 역확산에 의해 염이 제거된 염료를 평판형 역삼투막을 사용하여 농축하였으며 $Cl^-$ 이온의 배제율을 solution-diffusion 모델식에 적용하였다 2회의 Diafiltration(DF)을 수행한 NF에서도 역확산에서와 마찬가지로 도난투석에 의해 $Cl^-$ 이온의 배제율 감소와 음배제율을 관찰하였다. 특히 두번째 DF에서 도난투석의 효과는 더욱 크게 나타났다.

• 유기물자원화
• /
• 제25권2호
• /
• pp.41-48
• /
• 2017

기존 혐기성 및 호기성 처리에서 우수성이 입증된 E-PFR을 적용한 다단수직형 암모니아 스트리핑조를 개발하고 랩스케일 실험을 수행하였다. 다단수직형 암모니아스트리핑조의 단수별 암모니아성 질소 제거 실험(pH 10, 온도 $35^{\circ}C$, 기액비 $3min^{-1}$의 동일 조건)에서 8시간 경과 후 단이 없는 반응기는 약 52.5%의 제거율을 나타났으며, 5단 반응기에서는 약 62.6%의 제거율이 나타나 약 10%의 효율 차이가 있는 것으로 확인하였다. pH 변화에 따른 암모니아성 질소 제거 실험 (5단 반응기, 온도 $35^{\circ}C$, 기액비 $3min^{-1}$의 동일 조건)에서 8시간 경과 후 pH 9는 약 42.6%의 제거율을 나타났으며, pH 11에서 약 74.4%의 제거율이 나타났다. 온도 변화에 따른 암모니아성 질소 제거 실험 (5단 반응기, pH 10, 기액비 $3min^{-1}$의 동일 조건)에서 8시간 경과 후 $25^{\circ}C$에서 약 51%의 제거율을 나타났으며, $45^{\circ}C$에서 약 87.2%의 제거율이 나타났다. 공기주입량 변화에 따른 암모니아성 질소 제거 실험 (5단 반응기, pH 10, 온도 $35^{\circ}C$의 동일 조건)에서 8시간 경과 후 기액비 $2min^{-1}$에서 약 45.8%의 제거율을 나타났으며, 기액비 $4min^{-1}$에서 약 75%의 제거율이 나타났다. 이러한 결과를 바탕으로 추후 연속 운전 평가를 통해 실증플랜트 설계를 위한 인자 도출에 활용하고자 한다.

• 한국물환경학회지
• /
• 제21권6호
• /
• pp.687-694
• /
• 2005

Lab-scale experiments have been carried out to investigate the effect of F/R ratio of ASBR (Anaerobic Sequencing Batch Reactor) process on the removal of the organic matters in ammonia stripped swine wastewater. Three ASBR inoculated with sludge mixed with granular sludge of UASB (Upflow Anaerobic Sludge Blanket) and anaerobic digested sludge of municipal wastewater treatment plant were operated. Ammonia stripped swine wastewater was used as influent. Prior to conducting the experiments with varied conditions, the effect of increasing organic loading rate from 2.34 to $5.79gTCOD_{Cr}/L$-day at a fixed F/R ratio of 0.1 on the organic removal efficiency has been studied during start-up period. As the result of the experiment, under the condition of varied organic loadings, less than $4.14gTCOD_{Cr}/L$-day, the removed efficiency $TCOD_{Cr}$ of the ASBR process is 83% resulted from the mean value of effluent $TCOD_{Cr}$, 9,125 mg/L during the start-up period. Then ASBRs were operated with F/R ratio of 0.024, 0.303 and 0.91 respectively. Organic loading rate was increased from 4.56 to $15.43gTCOD_{Cr}/L$-day to investigate the effects of F/R ratio and organic loading rate on the organic removal efficiency. As the result of the experiment, less than $6.23gTCOD_{Cr}/L$/L-day, F/R ratio haven't an effect on the organic removal efficiency and the mean removal efficiency of TSS, $TCOD_{Cr}$ and $SCOD_{Cr}$ was about 80%, 86% and 78% at the all of F/R ratio. But as organic loading rate was increased from 8.54 to $12.04gTCOD_{Cr}/L$-day at the F/R ratio of 0.024, the removal efficiency of $SCOD_{Cr}$ decreased from 71% to 63%. The range of decreased removal efficiency of $SCOD_{Cr}$ at the F/R ratio of 0.024 was much more higher than at the F/R ratio of 0.303, 0.91. Thus, as organic loading rate was increased, ASBRs were operated with high F/R ratio to obtain high removal efficiency.

• 대한화학회지
• /
• 제52권2호
• /
• pp.148-154
• /
• 2008

2-Propylpiperidine-1-carbodithioate(PPCD)I 로 수식화한 octadecyl로 결합된 실리카 막 디스크로 구리(II) 이온의 잔유양의 추출과 간단하고 빠르게 원자흡수분광법(AAS)으로의 정량법을 소개한다. 추출효율과 흐름속도, pH, 형 태, 벗김 산의 가장 적은 양에 대해 연구되었다. Anthraquinone 유도체의 2 mg로 수식한 막디스크의 최대 용량은 425 μg Cu2+ 이었다. 제안한 방법의 검출한계는 7 ng/ml이다. 이 방법은 다른 시료와 온천수 시료로부터 Cu2+의 회수에 적용하 였다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.370-373
• /
• 2000

In this work, an extractive membrane bioreactor containing coulture broth of Burkholderia cepacia G4 PR1 constitutively expressing the TCE-degrading enzyme, tolune-ortho-monooxygenase(TOM), was used for the degradation of TCE. The membrane bioreactor operates by seperating the TCE-containing waste gas from the aerated biomedium, by which the air-stripping of TCE without degradation was overcome that could occur in conventional aerobic biological treatments of TCE-contaminated waste gases. This was achieved by a silicone rubber membrane which was coiled around a perspex draft tube. TCE from the gas phase diffuses across the silicone rubber membrane into microbial culture broth that was continuously fed from a separate aerobic CSTR. Therefore, TCE degradation occured without the TCE being directly exposed to the aerating gas stream. Of the TCE supplied to the membrane bioreactor, 72.6% was biodegraded during the operation of this system. To construct a mathematical model for this system, parameters describing microbial growth kinetics on TCE were determined using a CSTR bioreactor. Else parameters used for numerical simulation were determined from either indepedent experiments or values reported in the literature. The model was compared with the experimental data, and there was a good agreement between the predicted and the measured TCE concentrations in the system. To achieve a higher treatment efficiency, various operating conditions were simulated as well.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.270-274
• /
• 2001

With Increasing importance of electroless nickel plating technology in many fields such as electronic and automobile industries, the treatment of the spent baths is becoming a serious problem. These spent baths contain iron and zinc as impurities, organic acids as complexing reagents, and phosphonate ions as oxidized species of tile reducing reagent. as well as several grams per liter of nickel. The spent baths are currently treated by conventional precipitation method. but a mettled with no sludge generation is desired. This work aims at establishing a recycling process of nickel from tile spent baths using solvent extraction. Extraction behaviors of nickel. iron. and zinc in various 쇼pes of real spent baths are investigated as a function of pH using LIX841, di (2-ethylhexyl)phosphoric acid (D2EHPA), and PC88A as tile extractants. Nickel is extracted by LIX84I at the equilibrium pH of more than 6 with high efficiency. For the weakly acid baths. iron and zinc are extracted by D2EHPA or PC88A without adjusting the pH of the baths leaving nickel in the aqueous phase. Stripping of nickel from LIX84I with sulfuric acid is also investigated. It is shown that concentrated nickel sulfate solution (> 100 ㎏-Ni/㎥) is obtained. This solution can be reused in the electroless plating process. Based on these findings, flow sheets for recovering nickel from the spent baths are proposed.

• Membrane and Water Treatment
• /
• 제8권6호
• /
• pp.575-590
• /
• 2017

PolyHIPEs membrane prepared with styrene (St), divinylbenzene (DVB), and ethylhexyl acrylate (EHA) can yield a unique pore structure provided by large voids highly interconnected by many small window throats. With the advantageous pore structure, PolyHIPE presents a potential as a support for carrier facilitated transport membrane. Tricaprylmethylammonium chloride (Aliquat 336) can be efficiently incorporated into the PolyHIPE membrane by a two-step solvent-nonsolvent method to obtain an Aliquat 336-immobilized PolyHIPE membrane with good stability. The study of Cr (VI) transport through Aliquat 336-immobilized PolyHIPE membrane indicates that the membrane has high initial flux and maxima stripping flux ($J_f^o=15.01({\mu}mol/m^2s)$, $J_s^{max}=6.15({\mu}mol/m^2s)$). The reusability study shows that the Aliquat 336-immobilized PolyHIPE membrane can maintain high Cr(VI) recovery efficiency even after 15 cycles of operations. The developed membrane was also used in the separation of Cr (VI) from other anions (i.e., $SO_4{^{2-}}$ and $NO_3{^-}$) and other cations (i.e., Ni (II), Mg (II) and Cu (II)) with good selectivity.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.137-144
• /
• 2015

The present paper deals with the extractive separation and selective recovery of nickel and lithium from the sulfate leachate of cathode scrap generated during the manufacture of LIBs. The conditions for extraction, scrubbing and stripping of nickel from lithium were optimized with an aqueous feed containing $2.54kg{\cdot}m^{-3}$ Ni and $4.82kg{\cdot}m^{-3}$ Li using PC-88A. Over 99.6% nickel was extracted with $0.15kmol{\cdot}m^{-3}$ PC-88A in two counter-current stages at O/A=1 and pH=6.5. Effective scrubbing Li from loaded organic was systematically studied with a dilute $Na_2CO_3$ solution ($0.10kmol{\cdot}m^{-3}$). The McCabe-Thiele diagram suggests two counter-current scrubbing stages are required at O/A=2/3 to yield lithium-scrubbing efficiency of 99.6%. The proposed process showed advantages of simplicity, and high purity (99.9%) nickel sulfate recovery along with lithium to ensure the complete recycling of the waste from LIBs manufacturing process.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권1호
• /
• pp.74-84
• /
• 1986

Ejectors, having no moving, lubricating and leaking parats, are widely used as marine pumps because of its high working confidence. For instance, uses in ships are stripping in crude oil tank, bilge discharge in engine room, ballast water pumping on are carrier, and brine discharge from fresh water generator. And it is also used as cooling water recirculating pump in boiling water type nuclear reactor and deep-well pump. It is not easy to determine the optimal dimension for designing each ejector agreed with its suggested performance condition, because complicated calculations must be repeated to obtain the maximum efficiency affected by flowrate ratio, head ratio, area ratio and so on. Therefore, it is considered that the CAD (Computer-Aided Design) for ejector is a powerful method for design according to the individual design condition. In this paper, a computer program for water ejector design is developed based on the previous paper on theoretical analysis and experimental results for water ejector. And from the theoretical approach, an equation for the working limit and an equation for determing the shape of throat are obtained. The validity of the present computer program is sufficiently confirmed through the comparison of the computed results with the main dimension of the previous manufactured water ejector. This program will be easily developed as the CAD for various kinds of ejectors, including steam ejector.

• KSBB Journal
• /
• 제8권1호
• /
• pp.83-88
• /
• 1993

연속추출시 그 상의 분리가 용이한 spray column 에서 역미셀을 이용한 추출에 영향을 미치는 pH, 접촉횟수, 유속, 수용상과 유기상의 비 등 추출에 영향을 미치는 여러 인자들을 조사해 보았다. 그 결과 lipase는 등전점보다 낮은 3.6-4.5 사이에서 추출이 잘되었으며 역추출시에는 그와 반대로 등전점보다 높은 pH인 8.0-9.0에서 잘 추출되었다. 수용상과 유기상 사이의 접촉횟수가 증가함에 따라 추출량이 증가되었으며 추출시 계면활성제의 손실 때문에 유기상의 계속적인 공급이 필요하다. 유속의 효과는 접촉면적과 유기상 사이의 물의 함량의 반대효과로 0 0.068ml/sec과 0.101ml/sec사이에서 최적의 값을 갖는다. 수용상과 유기상간의 비에 따른 추출량은 예측했던데로 수용상의 양이 많을수록 그 추출량이 급격히 증가하는 경 향을 보였다. 각각에서 활성도는 추출전에 비해 70%의 회수율을 보였다.