Browse > Article
http://dx.doi.org/10.12989/mwt.2017.8.6.575

Cr (VI) separation by PolyHIPE membrane immobilized with Aliquat 336 by solvent-nonsolvent method  

Chen, Jyh-Herng (Department of Materials and Mineral Resources Engineering, National Taipei University of Technology)
Mai, Le Thi Tuyet (College of Engineering, National Taipei University of Technology)
Hsu, Kai-Chung (College of Engineering, National Taipei University of Technology)
Publication Information
Membrane and Water Treatment / v.8, no.6, 2017 , pp. 575-590 More about this Journal
Abstract
PolyHIPEs membrane prepared with styrene (St), divinylbenzene (DVB), and ethylhexyl acrylate (EHA) can yield a unique pore structure provided by large voids highly interconnected by many small window throats. With the advantageous pore structure, PolyHIPE presents a potential as a support for carrier facilitated transport membrane. Tricaprylmethylammonium chloride (Aliquat 336) can be efficiently incorporated into the PolyHIPE membrane by a two-step solvent-nonsolvent method to obtain an Aliquat 336-immobilized PolyHIPE membrane with good stability. The study of Cr (VI) transport through Aliquat 336-immobilized PolyHIPE membrane indicates that the membrane has high initial flux and maxima stripping flux ($J_f^o=15.01({\mu}mol/m^2s)$, $J_s^{max}=6.15({\mu}mol/m^2s)$). The reusability study shows that the Aliquat 336-immobilized PolyHIPE membrane can maintain high Cr(VI) recovery efficiency even after 15 cycles of operations. The developed membrane was also used in the separation of Cr (VI) from other anions (i.e., $SO_4{^{2-}}$ and $NO_3{^-}$) and other cations (i.e., Ni (II), Mg (II) and Cu (II)) with good selectivity.
Keywords
polyHIPE membrane; Cr(VI) separation; solvent-nonsolvent method;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Ferraz, H.C., Duarte, L.T., Alves, M. Di Luccio, T.L.M., Habert, A.C. and Borges, C.P. (2007), "Recent achievements in facilitated transport membranes for separation processes", Braz. J. Chem. Eng., 24(1) 101-118.   DOI
2 Gherasim, C.V., Bourceanu, G., Olariu, R.I. and Arsene, C. (2011), "A novel polymer inclusion membrane applied in Chromium (VI) separation from aqueous solutions", J. Hazard. Mater., 97, 244-253.
3 Haidekker, M.A., Brady, T.P., Lichlyter, D. and Theodorakis, E.A. (2005), "Effects of solvent polarity and solvent viscosity on the fluorescent properties of molecular rotors and related probes", Bioorg. Chem., 33(6), 415-425.   DOI
4 Jabera, A.M.Y., Alia, S.A. and Yahayab, G.O. (2005), "Studies on phenol permeation through supported liquid membranes containing functionalized polyorganosiloxanes", J. Membr. Sci., 250(1-2), 85-94.   DOI
5 Kaya, A., Alpoguz, H.K. and Yilmaz, A. (2013), "Application of Cr(VI) Transport through the Polymer Inclusion Membrane with a New Synthesized Calix[4]arene Derivative", Ind. Eng. Chem. Res., 52(15), 5428-5436.   DOI
6 Kebiche-Senhadji, O., Tingryb, S., Setab, P. and Benamora, M. (2010), "Selective extraction of Cr(VI) over metallic species by polymer inclusion membrane (PIM) using anion (Aliquat 336) as carrier", Desalination, 258, 59-65.   DOI
7 Kemperman, A.J.B., Rolevink, H.H.M., van den Boomgaard, Th. and Strathmann, H. (1997), "Hollowfibersupported liquid membranes with improved stability for nitrate removal", Sep. Purif. Technol., 12, 119-134.   DOI
8 Kocherginsky, N.M., Yang, Q. and Seelama, L. (2007), "Recent advances in supported liquid membrane technology", Sep. Purif. Technol., 53(2), 171-177.   DOI
9 Kozlowski, C.A. and Walkowiak, W. (2005), "Applicability of liquid membranes in chromium (VI) transport with amines as ion carriers", J. Membr. Sci., 266(1-2), 143-150.   DOI
10 Marcel, M. (1991), Basic Principles of Membrane Technology, Kluer Academic Publishers, Dordrecht/Boston/London.
11 Mehmet, K., Hamza, K.A., Ahmet, K., Nurcan, A., Ahmet, O.G. and Mustafa, A. (2011), "A kinetic study of mercury (II) transport through a membrane assisted by new transport reagent", Chem. Cent. J., 5, 43-49.   DOI
12 Neplenbroek, A.M., Bargeman, D. and Smolders C.A. (1992), "Supported liquid membranes: stabilization by gelation", J. Membr. Sci., 67(2-3), 149-165.   DOI
13 Othman, N., Harruddin, N., Idris, A., Ooi, Z., Fatiha, N. and Sulaiman, R.N.R. (2016), "Fabrication of polypropylene membrane via thermally induced phase separation as a support matrix of tridodecylamine supported liquid membrane for Red 3BS dye removal", Desalination Desalinat. Water Treat., 57(26), 12287-12301.   DOI
14 Richard, W.B. (2012), Membrane Technology and Applications, 3rd Edition, McGraw-Hill.
15 Rodriguez de San Miguel, E., Vital, X. and Gyves, J. (2014), "Cr(VI) transport via a supported ionic liquid membrane containing CYPHOS IL101 as carrier: System analysis and optimization through experimental design strategies", J. Hazard. Mater., 273, 253-262.   DOI
16 Saha, B., Gill, R.J., Bailey, D.G., Nabay, N. and Arda, M. (2004), "Sorption of Cr (VI) from aqueous solution by Amberlite XAD-7 resin impregnated with Aliquat 336", Radiat. Phys. Chem., 60, 223-244.
17 Scindia, Y.M., Pandey, A.K. and Reddy, A.V.R. (2005), "Coupled-diffusion transport of Cr(VI) across anion-exchange membranes prepared by physical and chemical immobilization methods", J. Membr. Sci., 249(1-2), 143-152.   DOI
18 Singare, P.U., Lokhande, R. and Madyal, R.S. (2011), "Thermal degradation studies of some strongly acidicacidic", O. J. Physi. Chem., 1, 45-54.   DOI
19 Senhadjia, O.K., Tingryb, S., Setab, P. and Benamora, M. (2010), "Selective extraction of Cr(VI) over metallic species by polymer inclusion membrane (PIM) using anion (Aliquat 336) as carrier", Desalination, 258, 59-65.   DOI
20 Silverstein, M.S. (2014), "PolyHIPEs: Recent advances in emulsion-templated porous polymers", Prog. Polym. Sci., 39(1), 199-234.   DOI
21 Tang, Y., Bao, S., Zhang, Y. and Liang, L. (2017), "Effect of support properties on preparation process and adsorption performances of solvent impregnated resins", React. Funct. Polym., 113, 50-57.   DOI
22 Tanko, N.L. (2011), "Transport relationships in porous media as a model for oil reservoir rocks", Thesis Doctor of Philosophy (PhD), University of Bath.
23 Vallero, D. (2014), Fundamentals of Air Pollution, 5th Edition, Elsevier Inc.
24 Weckhuysen, B.M., Wachs, I.E. and Schoonheydt, R.A. (1996), "Surface chemistry and spectroscopy of chromium in inorganic oxides", Chem. Rev., 96(8), 3327-3349.   DOI
25 Xu, J., Paimin, R., Shen, W. and Wang, X. (2003), "An investigation of solubility of Aliquat 336 in different extracted solutions", Fiber Polym., 4(1), 27-31.   DOI
26 Zha, F.F., Fane, A.G. and Fell, C.J.D. (1995), "Instability mechanisms of supported liquid membranes in phenol transport processes", J. Membr. Sci., 107(1-2), 59-74.   DOI
27 Zhang, W., Liu J., Ren, Z., Wang, S., Du, C. and Ma, J. (2009), "Kinetic study of chromium (VI) facilitated transport through a bulk liquid membrane using tri-n-butyl phosphate as carrier", Chem. Eng. J., 155(1), 83-89.   DOI
28 Alonso, A.I., Pantelides, C.C. (1996), "Modeling and simulation of integrated membrane process for recovery of Cr (VI) with Aliquat 336", J. Membr. Sci., 110(2), 151-167.   DOI
29 Zhao, C., Danish, E., Cameron, N.R. and Kataky, R. (2007), "Emulsion-templated porous materials (PolyHIPEs) for selective ion and molecular recognition and transport: applications in electrochemical sensing", J. Mater. Chem., 23(17), 2446-2454.
30 Alguacil, F.J., Caravaca, C. and Martin, M.I. (2003), "Transport of chromium (VI) through a Cyanex 921- supported liquid membrane from HCl solutions", J. Chem. Technol. Biotechnol., 78(10) 1048-1053.   DOI
31 Chen, J.H. and Huang, C.E. (2007), "Selective separation of Cu and Zn in the citric acid leachate of industrial printed wiring board sludge by D2EHPA-modified Amberlite XAD-4 resin", Ind. Eng. Chem. Res., 46(22), 7231-7238.   DOI
32 Arslana, G., Tor, A., Muslua, H., Ozmena, M., Akina, I., Cengeloglua, Y. and Ersoz, M. (2009), "Facilitated transport of Cr (VI) through a novel activated composite membrane containing Cyanex 923 as a carrier", J. Membr. Sci., 337(1-2), 224-231.   DOI
33 Asai, S., Watanabe, K., Saito, K. and Sugo, T. (2006), "Preparation of Aliquat 336-impregnated porous membrane", J. Membr. Sci., 281(7-9), 195-202.   DOI
34 Cameron, N.R. (2005), "High internal phase emulsion templating as a route to well-defined porous polymers", Polymer, 46(5) 1439-1449.
35 Chen, J.H., Hsu, K.C. and Chang, Y.M. (2013), "Surface modification of hydrophobic resin with tricaprylmethylammonium chloride for the removal of trace hexavalent chromium", Ind. Eng. Chem. Res., 52(33), 11685-11694.   DOI
36 Christian, R. (2003), Solvents and Solvent Effects in Organic Chemistry, 3rd Edition, Wiley-VCH Publishers.
37 Dinkar, A.K., Singh, S.K., Tripathi, S.C., Gandhi, P.M., Verma, R. and Reddy, A.V.R. (2013). ), "Carrier facilitated transport of thorium from HCl medium using Cyanex 923 in n-dodecane containing supported liquid membrane", J. Radioanal. Nucl. Chem., 298, 707-715.   DOI
38 Cussler, E.L. (1997), Diffusion: Mass Transfer in Fluid Systems New York, 2nd Edition, Cambridge University Press.
39 Danesi, P.R. and Reichley-Yinger, L. (1986), "A composite supported liquid membrane for ultraclean Co, Ni separations", J. Membr. Sci., 27(3) 339-347.   DOI
40 Derrick, M.R., Stulik, D. and Landry, J.M. (1999), Infrared Spectroscopy in Conservation Science: Scientific Tools for Conservation, Los Angeles, CA: Getty Conservation Institute, Los Angeles, CA.