• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.4
• /
• pp.444-450
• /
• 1999

This paper deals with several methods: the clustering method that uses k-means algorithm to abstract the area of characters on the image document and the distance function that suits for the HIS coordinate system to cluster the image. For the prepossessing step to recognize this, or the method of characters segmentate, the algorithm to abstract a discrete character is also proposed, using the linking picture element. This algorithm provides the feature that separates any character such as the touching or overlapped character. The methods of projecting and tracking the edge have so far been used to segment them. However, with the new method proposed here, the picture element extracts a discrete character with only one-time projection after abstracting the character string. it is possible to pull out it. dividing the area into the character and the rest (non-character). This has great significance in terms of processing color documents, not the simple binary image, and already received verification that it is more advanced than the previous document processing system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.4
• /
• pp.25-35
• /
• 2002

This work describes an 8b 200MHz time-interleaved subranging analog-to-digital converter (ADC) based on a single-poly digital CMOS process. Two fine ADCs for lower digital bits of the proposed ADC employ a time-sharing double-channel architecture to increase system speed and a new reference voltage switching scheme to reduce settling time of the reference voltages and chip area. The proposed intermeshed resistor string, which generates reference voltages for fine ADCs, improves linearity and settling time of the reference voltages simultaneously. The proposed sample- and-hold amplifier(SHA) is based on a highly linear common-drain amplifier and passive differential circuits to minimize power consumption and chip area with 8b accuracy and employs input dynamic common mode feedback circuits for high dynamic performance at a 200MHz sampling rate. A new encoding circuit in a coarse ADC simplifies the signal processing between the coarse ADC and two successive fine ADCs.

• The Korean Journal of Community Living Science
• /
• v.22 no.1
• /
• pp.103-113
• /
• 2011

The purpose of the study was to examine formative features of embroidered norigae in form, color, pattern and expressive technique through positive analysis of relics and various of collections of work and to consider expressive features of embroidered norigae. The results of the study were as follows. First, embroidered norigae has handcrafted decoration. it was made by being sewed for women longing for their family's happiness. Embroidered norigae is a dress worn by women that is hung on a coat string or the waist part of a skirt. Second, it is eco-environmental. Embroidered norigae applied things seen in nature such as flowers, butterflies and bees to its pattern. Third, it has practicality. Embroidered norigae has high practical value besides a decorative function. Needle case norigae and incense case norigae provide functions in accordance with women's wisdom and skill as well as practicality. Fourth, it is praying for good luck. Women embroidered patterns symbolizing their desires in life such as their family's happiness, wealth, many sons and a long life. Fifth, it has balance and harmony. The knot of embroidered norigae has a perfect symmetry in the front/back part and in the right/left part. And the main body and tassel are symetrical in the right/left part, which gives stability and comfortableness. Embroidered norigae is classified into knot, main body and decorative part in its form. The three kinds express their unique beauty by being harmonized together. Finally, it has a property of melody. Movement of the tassel has a property of melody shaken by the wind and movement of its wearer.

• The Journal of Society for e-Business Studies
• /
• v.7 no.1
• /
• pp.107-127
• /
• 2002

Database system parameter tuning is one of database system tuning that achieve to improve performance of database system with application program tuning and data model tuning. By parameter tuning adjusts value of entry that is staled in data dictionary's parameter file that is included to database system, it is thing which make relevant database system can display performance of most suitable. And, it is that achievement is one o( possible tuning method immediately without occurrence of additional expense or involved hardware for database system performance elevation and ashes composition of software. But, it is actuality that administration about parameter practical use is not achieved, and is using Default Value of parameter that database management system offers just as it is systematically. So, this paper presents parameter tuning process that can ：achieve Parameter tuning of database system that is operating present systematically, and parameter tuning process each activity important input urea and tuning achievement product. And explain about effect and result that happen by sort database system performance and parameters that it is affinity systematically, and grasp relationships between parameter, and change parameter of string database system. And not that parameter uses contents that specify by fixing when establish database administration system, is going to emphasize and explain that must utilize changing continuously during database system operation. It changes parameter entry value how in various kinds different operation environment and present if must apply, and will arrange effect that this parameter enoy value alteration gets in performance liking into account point that is actuality that is using parameter that define database administrators when install the database system just as it is continually without alteration.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.942-945
• /
• 1999

In this work, we proposed Proper etching algorithm for ultra-large scale integrated circuit device and simulated etching process using the proposed algorithm in the case of ICP (inductive coupled plasma) 〔1〕source. Until now, many algorithms for etching process simulation have been proposed such as Cell remove algorithm, String algorithm and Ray algorithm. These algorithms have several drawbacks due to analytic function; these algorithms are not appropriate for sub 0.1 ${\mu}{\textrm}{m}$ device technologies which should deal with each ion. These algorithms could not present exactly straggle and interaction between Projectile ions and could not consider reflection effects due to interactions among next projectile ions, reflected ions and sputtering ions, simultaneously In order to apply ULSI process simulation, algorithm considering above mentioned interactions at the same time is needed. Proposed algorithm calculates interactions both in plasma source region and in target material region, and uses BCA (binary collision approximation4〕method when ion impact on target material surface. Proposed algorithm considers the interaction between source ions in sheath region (from Quartz region to substrate region). After the collision between target and ion, reflected ion collides next projectile ion or sputtered atoms. In ICP etching, because the main mechanism is sputtering, both SiO$_2$ and Si can be etched. Therefore, to obtain etching profiles, mask thickness and mask composition must be considered. Since we consider both SiO$_2$ etching and Si etching, it is possible to predict the thickness of SiO$_2$ for etching of ULSI.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.4
• /
• pp.10-18
• /
• 2002

Network topology design is a multiobjective problem with various design components. The components such as cost, message delay and reliability are important to gain the best performance. Recently, Genetic Algorithms(GAs) have been widely used as an optimization method for real-world problems such as combinatorial optimization, network topology design, and so on. This paper proposed a method of Multi-objective GA for Design of the network topology which is to minimize connection cost and message delay time. A common difficulty in multiobjective optimization is the existence of an objective conflict. We used the prufer number and cluster string for encoding, parato elimination method and niche-formation method for the fitness sharing method, and reformation elitism for the prevention of pre-convergence. From the simulation, the proposed method shows that the better candidates of network architecture can be found.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.65-76
• /
• 2014

In this paper, we propose a high-level programming language for packet processing called eFlowC and it supporting programming development environment. Based on the C language which is already familiar and easy to use to program developers, eFlowC maintains the similar syntax and semantics of C. Some features that are unnecessary for the packet processing has been removed from C, eFlowC is highly focused on performing packet data, database, string byte information checking and event processing. Design high-level programming languages and apply an existing language or compiler technology, language function and compilation process that is required for packet processing will be described. In order to use the DPIC device such as X11, we designed a virtual machine eFVM that takes into account the scalability and portability. We have evaluated the utility of the proposed language by experimenting a variety of real application programs with our programming environment such as compiler, simulator and debugger for eFVM. As there is little research that devoted to define the formats, meanings and functions of the packet processing language, this research is significant and expected to be a basis for the packet processing language.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.6
• /
• pp.749-756
• /
• 2012

Objective: This study was performed to investigate the prevalence of musculoskeletal disorders of traditional Korean instrument player using a variety of traditional classical instruments: Gayageum, Geomungo, Ajaeng, Haegeum, Daegeum, Piri and Samul instruments. Background: A large percentage of instrument players have suffered from the musculoskeletal pain of each body parts. However, there is no research on the prevalence of musculoskeletal disorders of traditional Korean musical instrument players. Method: Through the focus group interview, a questionnaire to investigate musculoskeletal disorders was developed. The questionnaire consisted of four parts: demographic factors, performance factors, musculoskeletal disorders symptoms, musculoskeletal disorder experience. For the survey, 118 expert players participated. The data from the survey were analyzed by correlation analysis and chi-square analysis. Results: The symptoms of musculoskeletal disorders and the severe pain from musculoskeletal disorders were observed at neck, shoulder, back and knee. The musculoskeletal experience was statistically related to the factor of body height in Gayageum and Geomungo. In addition, the musculoskeletal experience in Geomungo was related to age and career. However, the musculoskeletal experience in Ajaeng and Haegeum was only related to the factor of hobby. The musculoskeletal experience in Daegeum and Piri was related to stretching. In addition, there was a statistical significance between the musculoskeletal experience and sex in Daegum. In Samul instruments, the statistical significance was observed at age, BMI, career and stretching. Conclusion: The symptoms of playing-related musculoskeletal disorders of traditional Korean musical players were prevalently observed at neck, shoulder, back and knee. In addition, these symptoms were related to the various demographic factors such as age, body height, BMI, career, sex, hobby and stretching. Application: The results of this study can be used as the preliminary data for preventing the musculoskeletal injuries of traditional Korean musical instrument players.

• Journal of Korean society of Dental Hygiene
• /
• v.9 no.4
• /
• pp.836-848
• /
• 2009

Objectives : This study was conducted to evaluated the subjective oral health state related periodontal disease of elderly people. Methods : Data were collected through the National Health and Nutrition Survey in 2005. Participants consisted of 1,091 elderly people above 65 years old. Independent variables in the survey were social characteristic, health behavior, oral health condition, oral health management. The data were analyzed by using the SPSS 12.0. Results : The more elderly people of 69.0% recognized own oral health as is not healthy, elderly people of 74.0% recognized own oral health as is not healthy about subjective oral health and a lot of stressed(82.8%) has felt highly about periodontal disease(p<0.001). Respondents of have a sound teeth(58.9%), have a lower denture(75.0%) and have a no problem in mastication(74.5%) has felt highly about periodontal disease(p<0.001). Elderly people recognized own oral health as is not healthy about subjective oral health were 0.316 times(p<0.01), elderly people recognized own oral health as is common healthy about subjective oral health were 0.241 times(p<0.001), a lot of stressed were 1.410 times has felt highly about periodontal disease. Elderly people of have a lower denture were 1.159 times, have a upper denture were 1.159 times, have a lower and upper denture were 0.464 times has felt highly about periodontal disease(p<0.05). Also respondents of have a no problem in mastication were 7.464 times compared with problem in mastication(p<0.001). Conclusions : Quality of life from disease of Korean elderly people can be fallen, and improve quality of life that medical treatment is healthy numerical value state numerical value state. Study's findings of above may be used to inform the importance of health numerical value state while establish dental health policy that is string.

• Journal of fish pathology
• /
• v.19 no.2
• /
• pp.99-108
• /
• 2006

Diseased tiger puffer (Takijugu rubripes) showed anorexia and severe anemia in the gills. In wet mount preparations Heterobothrium sp. with 4 sets of clamps on the opisthohaptor attached to the gill filaments of the diseased fish. From the drum-shaped filter for filtration of the culturing water and the sediment of aquarium held the diseased fish in the laboratory, their eggs forming long strings through connection of the bipolar filaments could be easily collected. The parasites with 4 pairs of clamps on the opisthohaptor were 2.38mm in length and 0.71 mm in width, but had no isthmus which was separated the opisthohapor from the body proper. The parasites could be easily distinguished from Heterobothrium tetrodonis and H. okamotoi in the absence of distinct isthmus, and resembled H. yamagutii described from the gills of Takifugu xanthopterus in Japan. Their eggs were yellowish spindle in shape and 180-200 x 5-6 Iffil in size, which were pointed at both ends. The eggs were linked to adjacent egg shells like a string of beads by the filaments. Onchomiracidia, ciliated larvae spawned from the eggs were 133 Iffil (120-146 Iffil) x 751ffil (68-80 Iffil) in size. The length of the ciliates was 12 Iffil in the anterior part of the larvae and 14 Iffil in the posterior part. Round or leaf-shaped young parasites attached on the secondary gill lamellae. There was a tendency that most of round smaller parasites without an opisthohaptor were found in the middle part of the gill lamellae while leaf-shaped larger ones with a opisthohaptor attached on the distal part of the gill filaments. Each clamp of mature parasites grasped one secondary gill filament which resulted in bending of the filaments and hyperplasia of the epithelium and mucous cells. In the branchial cavity around the pseudobranch, mature parasites grasped the adjacent ones by means of the clamps, and the epithelia of the branchial cavity around the parasites showed severe irregular hyperplasia and erosion with strongly PAS-positive mucous cells.