• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3732-3744
• /
• 2022

To investigate the effects of ocean conditions on the thermal stress and deformation caused by thermal stratification of a pressurizer surge line in a floating nuclear power plant (FNPP), the finite element simulation platform ANSYS Workbench is utilized to conduct the fluid-solid-thermal coupling transient analysis of the surge line under normal "wave-out" condition (no motion) and under ocean conditions (rolling and pitching), generating the transient response characteristics of temperature distribution, thermal stress and thermal deformation inside the surge line. By comparing the calculated results for the three motion conditions, it is found that ocean conditions can significantly improve the thermal stratification phenomenon within the surge line, but may also result in periodic oscillations in the temperature, thermal stress, and thermal deformation of the surge line. Parts of the surge line that are more susceptible to thermal fatigue damage or failure are determined. According to calculation results, the improvements are recommended for pipeline structure to reduce the effects of thermal oscillation caused by ocean conditions. The analysis method used in this study is beneficial for designing and optimizing the pipeline structure of a floating nuclear power plant, as well as for increasing its safety.

• Korean Journal of Psychosomatic Medicine
• /
• v.14 no.1
• /
• pp.33-38
• /
• 2006

Biofeedback training to increase the amplitude of respiratory sinus arrhythmia(RSA) maximally increases the amplitude of heart rate variability(HRV) only in respiratory rate at approximately 0.1Hz. To perform this task, people slow their breathing to this rate to point where resonance occur between respiratory sinus arrhythmia(RSA) and oscillation that naturally occur at this rate, probably triggered in part by baroreflex activity. The biofeedback technique allows each individual to breathe at a rate that is specifically adapted to the rhythms of his or her own body. A manual is presented for carrying out this method.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.56-61
• /
• 1996

In this paper, new buck converter of a TV power system is presented. First, we devised a revised driving circuit for an emitter-coupled type buck converter, by which it is possible to reduce the material cost of transformers and voltage stress of power device. Secondly, we adopted a hybrid oscillation technique. When TV system is in off-stage, initial standby power which is necessary for remote controllable TV system is supplied by self-oscillating mode. Main power which is necessry in TV system bing on state is provided by an externally triggered oscillating mode. The switching frequency is synchronized to the oscillating frequency of horizontal deflection in TV, by which we can reduce picture noises and the size of power transformer. Thirdly, a simple error amplifier is inserted to the feed-back loop to keep the output voltage constant which means pulse width modulatio mode is added in driving part of power device. Finally, we showed by experiments that our proposed converter performs well enough to be close to the theoretically predicted values.

• Journal of computational fluids engineering
• /
• v.13 no.3
• /
• pp.8-13
• /
• 2008

We present a numerical simulation technique and some preliminary results of the impact and spreading of a droplet containing particles on the solid substrate in 2D. We used the 2nd-order Adams-Bashforth / Crank-Nicholson method to solve the Navier-Stokes equation and employed the level-set method with the continuous surface stress for description of droplet spreading with interfacial tension. The impact velocity has been generated by the instantaneous gravity. The distributed Lagrangian-multipliers method has been combined for the implicit treatment of rigid particles and the discontinuous Galerkin method has been used for the stabilization of the interface advection equation. We investigated the droplet spreading by the inertial force and discussed effects of the presence of particles on the spreading behavior using an example problem. We observed reduced oscillation and spread for the particulate droplet.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.365-371
• /
• 1998

In the present study, we attempted to add the incompatible functions as additional variable terms to the conventional u-p formulation. It is derived from the four-field generalized variational principle that encompasses velocity, pressure, velocity strains and stress fields as independent interpolated variables. As a severe test of the present formulation, we have investigated the driven cavity with the corner velocity singularity like leaky lid. Through the test, the present element performs very well without unstable oscillation of pressure distribution.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.189-196
• /
• 2004

A modified generalized particle algorithm, MGPA, was suggested to improve the calculation efficiency of standard SPH Method in numerical analysis of high speed impact behavior. MGPA had a new weight function to reduce computation time. The efficiency of this method was proven through calculation for the sample problems of one dimensional rod impact problem and two dimensional plate impact problem. The MGPA method reduced the calculation error and stress oscillation near the boundaries. The validity of this approach was shown by the comparison with ABAQUS results in two dimensional plate impact problem.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.6
• /
• pp.164-171
• /
• 2008

A modified generalized particle algorithm, MGPA, was suggested to improve the computational efficiency of standard SPH method in numerical analysis of high speed impact behavior. This method uses a numerical failure mechanism than material failure models to describe the target penetration. MGPA algorithm was more effective to describe the impact phenomena and new boundaries produced during the calculation process were well recognized and treated in the target penetration problem of a bullet. When bullet perforation problems were analyzed by this method, MGPA algorithm calculation gives the stable numerical solution and stress oscillation or particle penetration phenomena were not shown. The error range in ballistic velocity limit is less than $2{\sim}13%$ for various target thickness.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1224-1232
• /
• 2014

A full-bridge secondary dual-resonant DC-DC converter using the asymmetrical pulse-width modulated (APWM) strategy is proposed in this paper. The proposed converter achieves zero-voltage switching for the power switches and zero-current switching for the rectifier diodes in the whole load range without the help of any auxiliary circuit. Given the use of the APWM strategy, a circulating current that exists in a traditional phase-shift full-bridge converter is eliminated. The voltage stress of secondary rectifier diodes in the proposed converter is also clamped to the output voltage. Thus, the existing voltage oscillation of diodes in traditional PSFB converters is eliminated. This paper presents the circuit configuration of the proposed converter and analyzes its operating principle. Experimental results of a 1 kW 385 V/48 V prototype are presented to verify the analysis results of the proposed converter.

• Journal of computational fluids engineering
• /
• v.11 no.2 s.33
• /
• pp.25-31
• /
• 2006

A two-dimensional backward facing step flow is simulated by using URANS and Detached Eddy Simulations(DES) approaches. Turbulence models adopted for URANS and DES simulations are Spalart-Allmaras(S-A) model and Shear Stress Transport(SST) model. The target flow with ER=1.125, $Re_H=37,500$ is experimentally studied by Driver & Seegmiller. Various versions of DES have been tested in this paper. Results of the simulations are compared with the experimental data available to evaluate the merits and demerits of URANS and several versions of DES. URANS simulation converges to a steady state and hence unsteady characteristics are not featured. DES simulations in general successfully mimic large scale structures and oscillation characteristics of the flow.

• Journal of the Korean Society of Visualization
• /
• v.9 no.1
• /
• pp.17-19
• /
• 2011

The bubble oscillations play an important role in ultrasonic cleaning processes. In the ultrasonic cleaning of semiconductor wafers, the cleaning process often damages micro/nano scale patterns while removing contaminant particles. However, the understanding of how patterns in semiconductor wafers are damaged during ultrasonic cleaning is far from complete yet. Here, we report the observations of the motion of bubbles that induce solid wall damage under 26 kHz continuous ultrasonic waves. We classified the motions into the four types, i.e. volume motion, shape motion, splitting or jetting motion and chaotic motion. Our experimental results show that bubble oscillations get unstable and nonlinear as the ultrasonic amplitude increases, which may exert a large stress on a solid surface raising the possibility of damaging microstructures.