• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.485-496
• /
• 2013

In recent years, frequent terror or military attacks by explosion or impact accidents have occurred. Examplary case of these attacks were World Trade Center collapse and US Department of Defense Pentagon attack on Sept. 11 of 2001. These attacks of the civil infrastructure have induced numerous casualties and property damage, which raised public concerns and anxiety of potential terrorist attacks. However, a existing design procedure for civil infrastructures do not consider a protective design for extreme loading scenario. Also, the extreme loading researches of prestressed concrete (PSC) member, which widely used for nuclear containment vessel, gas tank, bridges, and tunnel, are insufficient due to experimental limitations of loading characteristics. To protect concrete structures against extreme loading such as explosion and impact with high strain rate, understanding of the effect, characteristic, and propagation mechanism of extreme loadings on structures is needed. Therefore, in this paper, to evaluate the impact resistance capacity and its protective performance of bi-directional unbonded prestressed concrete member, impact tests were carried out on $1400mm{\times}1000mm{\times}300mm$ for reinforced concrete (RC), prestressed concrete without rebar (PS), prestressed concrete with rebar (PSR, general PSC) specimens. According to test site conditions, impact tests were performed with 14 kN impactor with drop height of 10 m, 5 m, 4 m for preliminary tests and 3.5 m for main tests. Also, in this study, the procedure, layout, and measurement system of impact tests were established. The impact resistance capacity was measured using crack patterns, damage rates, measuring value such as displacement, acceleration, and residual structural strength. The results can be used as basic research references for related research areas, which include protective design and impact numerical simulation under impact loading.

• KDI Journal of Economic Policy
• /
• v.32 no.4
• /
• pp.153-195
• /
• 2010

The recent global financial crisis has been the outcome of, among other things, the mismatch between institutions and the reality of the market in the current global financial system. The International financial institutions (IFIs) that were designed more than 60 years ago can no longer effectively meet the challenges posed by the current global economy. While the global financial market has become integrated like a single market, there is no international lender of last resort or global regulatory body. There also has been a rapid shift in the weight of economic power. The share of the Group of 7 (G7) countries in global gross domestic product (GDP) fell and the share of emerging market economies increased rapidly. Therefore, the tasks facing us today are: (i) to reform the IFIs -mandate, resources, management, and governance structure; (ii) to reform the system such as the international monetary system (IMS), and regulatory framework of the global financial system; and (iii) to reform global economic governance. The main focus of this paper will be the IMS reform and the role of the Group of Twenty (G20) summit meetings. The current IMS problems can be summarized as follows. First, the demand for foreign reserve accumulation has been increasing despite the movement from fixed exchange rate regimes to floating rate regimes some 40 years ago. Second, this increasing demand for foreign reserves has been concentrated in US dollar assets, especially public securities. Third, as the IMS relies too heavily on the supply of currency issued by a center country (the US), it gives an exorbitant privilege to this country, which can issue Treasury bills at the lowest possible interest rate in the international capital market. Fourth, as a related problem, the global financial system depends too heavily on the center country's ability to maintain the stability of the value of its currency and strength of its own financial system. Fifth, international capital flows have been distorted in the current IMS, from EMEs and developing countries where the productivity of capital investment is higher, to advanced economies, especially the US, where the return to capital investment is lower. Given these problems, there have been various proposals to reform the current IMS. They can be grouped into two: demand-side and supply-side reform. The key in the former is how to reduce the widespread strong demand for foreign reserve holdings among EMEs. There have been several proposals to reduce the self-insurance motivation. They include third-party insurance and the expansion of the opportunity to borrow from a global and regional reserve pool, or access to global lender of last resort (or something similar). However, the first option would be too costly. That leads us to the second option - building a stronger globalfinancial safety net. Discussions on supply-side reform of the IMS focus on how to diversify the supply of international reserve currency. The proposals include moving to a multiple currency system; increased allocation and wider use of special drawing rights (SDR); and creating a new global reserve currency. A key question is whether diversification should be encouraged among suitable existing currencies, or if it should be sought more with global reserve assets, acting as a complement or even substitute to existing ones. Each proposal has its pros and cons; they also face trade-offs between desirability and political feasibility. The transition would require close collaboration among the major players. This should include efforts at the least to strengthen policy coordination and collaboration among the major economies, and to reform the IMF to make it a more effective institution for bilateral and multilateral surveillance and as an international lender of last resort. The success on both fronts depends heavily on global economic governance reform and the role of the G20. The challenge is how to make the G20 effective. Without institutional innovations within the G20, there is a high risk that its summits will follow the path of previous summit meetings, such as G7/G8.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.10
• /
• pp.4457-4463
• /
• 2015

Common genetic variation Q192R in the paraoxonase 1 (PON1) gene has been considered to be implicated in the development of many cancers. Nevertheless, results from the related studies were inconsistent. To elucidate the association, we performed a meta-analysis for 8,112 cases and 10,037 controls from 32 published case-control studies. Odds ratios (ORs) with 95% confidence intervals (CIs) were used to assess the strength of the association by STATA 12.0 software. Overall, we revealed that the PON1-192R allele was associated with a reduced risk of the overall cancers. Moreover, in the stratified analysis by cancer types (breast cancer, prostate cancer, brain cancer etc.), the results showed that PON1-192R allele was associated with a decreased risk in breast cancer (R vs Q: OR=0.605, 95% CI=0.378-0.967, $P_{heterogeneity}=0.000$; RR vs QQ: OR=0.494, 95% CI=0.275-0.888, $P_{heterogeneity}=0.002$; RQ vs QQ: OR=0.465, 95% CI=0.259-0.835, $P_{heterogeneity}=0.000$; and RR+RQ vs QQ: OR=0.485, 95% CI=0.274-0.857, $P_{heterogeneity}=0.000$), and associated with prostate cancer in homozygote (RR vs QQ: OR=0.475, 95% CI=0.251-0.897, $P_{heterogeneity}=0.001$) and recessive models (RR vs RQ+QQ: OR=0.379, 95% CI=0.169-0.853, $P_{heterogeneity}=0.000$), while an increased risk was identified in lymphoma (R vs Q: OR=1.537, 95% CI=1.246-1.896, $P_{heterogeneity}=0.944$; RR vs QQ: OR=2.987, 95% CI=1.861-4.795, $P_{heterogeneity}=0.350$; RR+RQ vs QQ: OR=1.354, 95% CI=1.021-1.796, $P_{heterogeneity}=0.824$; and RR vs RQ+QQ: OR=2.934, 95% CI=1.869-4.605, $P_{heterogeneity}=0.433$), and an increased risk in prostate cancer under heterozygote comparison (RQ vs QQ: OR=1.782, 95% CI=1.077-2.950, $P_{heterogeneity}=0.000$) and dominant models (RR+RQ vs QQ: OR=1.281, 95% CI=1.044-1.573, $P_{heterogeneity}=0.056$). When subgroup analysis that performed by the control source (hospital based or population based), a decreased risk of the overall cancers was revealed by homozygote (RR vs QQ: OR=0.601, 95% CI=0.366-0.987, $P_{heterogeneity}=0.000$) and dominant models (RR vs RQ+QQ: OR= 0.611, 95% CI=0.384-0.973, $P_{heterogeneity}=0.000$) in hospital based group. Stratifying by ethnicity, a significantly reduced risk of the overall cancers under allele contrast model (R vs Q: OR=0.788, 95% CI=0.626-0.993, $P_{heterogeneity}=0.000$) was uncovered in Caucasian. In summary, these findings suggested that PON1 Q192R polymorphism was associated with a reduced risk of the overall cancers, nevertheless, it might increase cancer susceptibility of prostate and lymphoma risk. Large well-designed epidemiological studies will be continued on this issue of interest.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.1
• /
• pp.5-15
• /
• 2011

Prior to the introduction of the CRM, we need to analyze the characteristics and the situations of the company, and should establish a clear vision of the CRM. And each company should identify elements and technologies for introducing the most suitable CRM for them, and optimize them, with long-term perspective. In addition, it requires the implementation strategy which integrates the existing company's routine marketing activities with the concept of the CRM. According to the implementation strategy, the company should improve the business process which is the most effective in investment step by step, and the information system strategy, which develops system investment gradually, should harmonize with it. First, we recognized that raising the company value is important by maximizing customer lifetime value (LTV) by understanding customer needs, and achieving the company's goal through customer satisfaction. Second, we understood that adopting the CRM should be accompanied by changes in the structure, business process and customer contact channels, and it can be successfully integrated with business when it gets proper understandings and attentions of the management. Third, the reality is that there are few cases of successful implementation of domestic companies, and some companies that successfully implement the system mean nothing but implement the solution for developing the CRM. Therefore, it needs to be observed for the long haul, and it seems that we need to approach more systematically to implementation cases for each industry about implementation of the CRM. Fourth, the CRM is no longer the preserve of major companies, and it is the time that medium and small sized enterprises also need it. Taking lesson from Switzerland's small size store merchants who successfully adopt right size of the CRM for their business, for domestic medium and small sized enterprises, the necessity to develop business through developing the CRM models which fit their situations and maintaining relationships with customers has been grown. Fifth, for adopting the CRM business processes, changing or converting the CRM system to the model which fits the company's situation is important rather than applying the advanced company's CRM system model. In other words, the CRM solution which can maximize their own strength by developing the CRM program that makes the most of features and characteristics of the company should be adopted.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.91-98
• /
• 2008

Purpose: Radio-isotopes (RI) use has been steadily developing due to industrial and technical development in the modern medical society. Particularly, popularization of domestic cyclotrons dramatically enable hospitals to produce and use diagnostic radio-isotopes. Generally, only specific facilities such as hospitals, research institutes, nuclear power plants and universities can use radio-isotopes, they are also responsible for ventilation system. The strength of radioactivity in the air is strongly regulated and controlled by korea atomic energy law in Korea Institue of Nuclear Safety (KINS), so that air radioactivity exposure can lead to environmental pollution surrounding places. In this study, we'd like to find out the investigation and the present condition of the controlled ventilation system in domestic hospitals by an emission standard from KINS, and try to reach an agreement about how to use the ventilation system. Result: Definition of filters, features and structures of pre-filters, hepa-filters, charcol filters, filter exchange procedures and precautions are explained. RI deflation concentration and filter exchange cycle have been presented as a standard prescribed in the rules of KINS. The Radiation Control Management System (RCMS) introduced by Seoul National University Bundang Hospital linking to digital pressure gauge with computer controller in another medical facilities were described in details. Conclusions: The system of medical facilities using RI has been remarkably developing in 21 century. Especially, radiation safety control system has also been grown rapidly into the subdivision, specialization, advanced technology along with international technical improvement. However, As far as current RI ventilation system is concerned, it has nothing better than doing in the past. Preferentially, to reinforce this, more sophisticated system with strict periodic filter exchange and exhaust air control guidance should be introduced by applying brilliant domestic information technology for RCMS and digital gauge method. From personal point of view as a radiation safety manager, I have provide with present problems and improvements. Futhermore, more improved guidance should be conducted.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.812-818
• /
• 2014

Raising seedlings is important for fruit crops and is especially significant for strawberries as it accounts for 80% of their cultivation. However, there are few studies on raising seedlings of strawberries by hydroponics. Since strawberries show clear differences in growth characteristics based on cultivar, it is necessary to develop suitable fertilizer formula, concentration and pH for each cultivar, and also to examine the amount of nutrient feeding appropriate for each medium type. A key to raising seedlings of strawberries by hydroponics is the development of strategies to manage the concentration of nutrient solution. The mother plants of 'Daewang' strawberries were planted on hydroponics benches filled with cocopeat on March 28, 2012. Three nutrient solution treatments were employed during the term of raising seedlings: a type that supplied EC $0.6dS{\cdot}m^{-1}$ nutrient solution for 30 days and only water for 20 days [0.6 (30) + 20]; a type that supplied EC $1.2dS{\cdot}m^{-1}$ nutrient solution for 30 days and only water for 20 days [1.2 (30) + 20]; and a type that supplied EC $1.2dS{\cdot}m^{-1}$ nutrient solution for 50 days [1.2 (50)]. The plants were then planted on hydroponics benches filled with cocopeat on September 20, and managed with EC $0.6-0.8dS{\cdot}m^{-1}$ strawberry nutrient solution developed by Yamazaki. After planting, shoot growth, flowering rate and fruit quality of the first cluster were investigated. The petiole length, leaf length, leaf width and crown diameter showed the highest grown in the [1.2 (50)] treatment, followed by [1.2 (30) + 20], and then [0.6 (30) + 20], indicating that the higher concentration of nutrient solution was preferable for raising seedlings. However, the growth differences among treatments gradually disappeared as growth continued, and the crown diameter especially grew to exhibit almost no difference at all among treatments. The point of flowering came first in [0.6 (30) + 20], followed by [1.2 (30) + 20] and then [1.2 (50)]. The [0.6 (30) + 20] treatment showed much earlier flowering than other treatments, which implies that low-concentration nutrient solution may be beneficial to the flowering of 'Daewang' strawberries while raising seedlings. There was no statistically significant difference among treatments in fruit length, fruit diameter and fruit firmness. Fruit weight in [1.2 (50)] treatment was significantly higher than other treatments. However, soluble solids of fruit was the lowest in [1.2 (50)] treatment. Together, the results of this experiment imply that it is better to supply EC $0.6dS{\cdot}m^{-1}$ solution for 30 days and then supply only water for 20 days to adequately manage concentration of nutrient solutions during the period of raising seedlings of strawberries by hydroponics.

• Korean Journal of Poultry Science
• /
• v.30 no.4
• /
• pp.219-228
• /
• 2003

Two experiments were conducted to investigate the feeding value of stevia by-product (SB) on performance in broiler chicks and laying hens. In experiment 1, a total 256 one day old male broiler chicks were replaced in 0, 2, 4, 7% of SB with four replicates for 5 weeks. All diets were consisted of isocaloric and isonitrogen containing CP 21.5, 19% and ME 3,100 kcal/kg for starting and finishing period, respectively. Weight gain of SB treatments decreased compared with control for the first three weeks, but no difference for the finishing period. Feed intake and feed conversion were no statistical difference between control and feeding stevia groups for overall period. There were no different total number of intestinal microflora. However, the number of Salmonella and E. coli of cecum seemed to decrease in SB feeding groups. Total Lactobacillus and yeast tended to be higher in those groups than control. The PUFa increased in SB treatments, but was no significance. In experiment 2. stevia by-product(SB) were mixed with iso-caloric and isonitrogeneous method to investigate the feeding value in induced molting hens of 78 weeks old. A total 360 birds were replaced in the four treatments(0, 2, 4, 8% SB) with five replicates. Egg production, quality and fatty acid composition in egg were periodically measured for 20 weeks. No difference were found in egg production, feed intake, feed conversion between control and SB treatments for overall period. Egg shell breaking strength, thickness, albumen height and Haugh unit were not statistically different. However, yolk color was significantly high in SB treatments compared to control(P<0.05). Yolk MUFA increased significantly in SB treatments compared to that of control(p<0.05), but PUFA tended to decrease in SB treatments. No significant difference was detected in total sugar in egg yolk between SB treatments and control. Tocopherol of egg yolk 2 and 4% SB were significantly higher than those feed the control (p<0.05).

• Korean Security Journal
• /
• no.23
• /
• pp.65-86
• /
• 2010

The conclusion for this paper is as following as to plan for advancing security. First, Depending on situation, security martial arts technique is necessary in security work, but the case that the client need to be covered by security guards to avoid the danger often happens. If there is no self-sacrifice and loyalty to the clients, the meaningful security work is not completed in this situation. Therefore, the basic views on education of security leaders need to be defensive than aggressive, and be spirit-equipped than technical feature. Second, more time has to be taken training mentality along with focusing on technical education of security martial arts. To escape from danger spreaded around, security guards must be strong mentally and physically, then they are able to finish the situation. If someone is chosen as a security guard, one's physical strength is already approved. This means that the rest part for the perfect accomplishment is strict discipline on mental one's mind, and basically physical training has to be continued. In conclusion, The elements that the instructor has to acquire are not only extensive theoretical knowledge of the security martial arts and real experiences through techniques but also personality cultivation which maximize the morality training. Accordingly, this could bring the client personally change in perception of the security guard, furthermore greatly expand the academic and professional security work of security department.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.7
• /
• pp.833-840
• /
• 2017

For wide application of perilla leaf, which has various healthy functions and can be easily cultured across Korea, the physicochemical and sensory properties of pan bread made with various amounts of squeezed perilla leaf juice (SPLJ) were analyzed. When dough characteristics were analyzed by using farinograph, consistency and dough development time were not significantly different between the control and bread dough made with various amounts of SPLJ, whereas dough stability time increased with increasing SPLJ amount. Expansion rate of dough decreased with increasing SPLJ amount. The volume, specific volume, and baking loss rate of pan bread made with various SPLJ amounts decreased with increasing SPLJ amount. Pan bread crumb colors became thickened and greenish with increasing SPLJ amount. For physical properties of pan bread made with various SPLJ amounts, springiness and cohesiveness decreased with increasing SPLJ amount, whereas brittleness, chewiness, and hardness increased with increasing SPLJ amount. In the sensory strength analysis, pore uniformity and soft texture decreased with increasing SPLJ amount, whereas crumb color (dark greenish), perilla leaf odor, perilla leaf taste, and chewing texture increased with increasing SPLJ amount. In the overall acceptance analysis, 1.5% SPLJ was the most preferred with a score of 7.10. However, statistical differences between 1.5% and 1.0% SPLJ were not detected at P<0.05. In the partial least squares analysis, consumers liked bread with a green crumb color, perilla leaf odor, perilla leaf taste, and soft and chewing texture. In conclusion, physicochemical properties of pan bread made with SPLJ were less desirable than those of the control; however, consumer acceptance of pan bread made with 1.5% SPLJ was shown the highest. Therefore, methods for increasing physicochemical properties of pan bread made with SPLJ need to be developed for wide application of perilla leaf.

• Journal of Korea Port Economic Association
• /
• v.35 no.4
• /
• pp.1-16
• /
• 2019

The purpose of this study is to Analyze the problems that container shipping companies exist through the commercialization of container shipping for Non-Arctic countries and the opportunity factors for the transport of the Arctic shipping to improve cooperation cross-border relation Arctic policy and the use of transport. In order to design a hierarchy analysis method study model, four high and 17 low factors were extracted by designing a hierarchy analysis method study model based on results by prior study and in-depth interview. The first of the higher factors is the internal strength of assessing the value of the Arctic, the will and capabilities of the shipping companies in creating new markets with the vision and goals of the shipping companies. Second, the internal constraints associated with the shipping companies advance to the NSR mean the negative factors for the entry into the NSR and the internal weaknesses that cause the shipping companies capacity limitations. Third, the economic benefits from the use of NSR are external factor for shipping companies in cooperation with the future economic value of the Arctic and with respect to Arctic sea and Arctic advance and development from Arctic coastal countries. Finally, external pre-emptive tasks means to respond to use NSR by external restrictions on transport to prepare the possibility of severe weather conditions, the customs policy change of coastal countries.