• 대한금속재료학회지
• /
• 제48권9호
• /
• pp.791-797
• /
• 2010

The creep crack growth rate (da/dt) of the Cr-Mo steels tested by pre-crack and the voltage (or resistance) variables were related into fracture parameter (Ct), crack growth coefficient (H), and an exponent (q) in the parts of Base, weld and HAZ. The fracture parameter (Ct) has various variables relating to the specimen and crack shape, applied stress, and creep strain curve. The H and q was inferred by OLS regression (ordinary least square method), and the H values were solved in statistics and probability assessment, which were attained fromPDF's distributions (probability density function). The HAZ part has the highest value of q by OLS regression and the widest distribution of H by PDF of WEIBULL, which means that the crack sensitivity of HAZ should be cautioned against the creep crack growth and failure.

• Corrosion Science and Technology
• /
• 제20권6호
• /
• pp.466-474
• /
• 2021

A wet type scrubber for merchant vessel uses super austenitic stainless steels with pitting resistance equivalent number (PREN) of 40 or higher for operation in a harsh corrosive environment. However, it is expensive due to a high nickel content. Thus, electrochemical behavior and cavitation erosion characteristics of UNS S32750 as an alternative material were investigated. Microstructure analysis revealed fractions of ferritic and austenitic phases of 48% and 52%, respectively, confirming the existence of ferritic matrix and austenitic island. Potentiodynamic polarization test revealed damage at the interface of the two phases because of galvanic corrosion due to different chemical compositions of ferritic and austenitic phases. After a cavitation test, a compressive residual stress was formed on the material surface due to impact pressure of cavity. Surface hardness was improved by water cavitation peening effect. Hardness value was the highest at 30 ㎛ amplitude. Scanning electron microscopy revealed wave patterns due to plastic deformation caused by impact pressure of the cavity. The depth of surface damage increased with amplitude. Cavitation test revealed larger damage caused by erosion in the ferritic phase due to brittle fracture derived from different strain rate sensitivity index of FCC and BCC structures.

• 한국지반공학회논문집
• /
• 제24권3호
• /
• pp.5-11
• /
• 2008

이 논문에서는 사면 안정 해석시 경사 절편법을 이용하여 안전율을 구하며 유전자 알고리즘방법을 이용하여 한계파괴면을 결정하는 이론을 제안하였다. 해석방법에서는 한계 전단 파괴면과 안전율을 찾고 비선형 평형 방정식의 해를 구하기 위해 구속 최적화 문제로 간주하여 해석을 수행하였다. 유전자 알고리즘 방법의 효율성을 검증하기 위하여 예제를 논문에 포함하였다. 유전자 알고리즘 방법에 의하여 도출된 사면 안정 해석결과는 기존방법에 비하여 우수한 것으로 판명되었다.

• Corrosion Science and Technology
• /
• 제23권4호
• /
• pp.302-309
• /
• 2024

The purpose of this study was to elucidate effects of a thin (tens to hundreds of nanometers) Ni-flash coating layer on hydrogen embrittlement (HE) and liquid metal embrittlement (LME) in ultra-high-strength electrogalvanized steel with a tensile strength of more than 1 GPa. Various experimental and analytical methods, including thermal desorption spectroscopy, slow strain rate testing, resistance spot welding, X-ray diffraction, and metallographic observation, were employed. Results showed that an increase in Ni target amount for flash coating resulted in a decrease in diffusible hydrogen content during electrogalvanizing, resulting in a significant decrease in HE sensitivity. Moreover, a Ni target amount of more than 1000 mg/m² drastically reduced the occurring frequency and average depth of LME. This reduction could be primarily attributed to formation of Zn-Ni intermetallic phases during the welding process that could inhibit liquefaction of intermetallic phases in the heat-affected zone. This study provides a desirable Ni target amount for Ni-flash coating on ultra-high-strength steels conducted in a continuous galvanizing line or a high-speed batch line to achieve high resistance to both HE and LME.

• 식물병연구
• /
• 제26권1호
• /
• pp.8-18
• /
• 2020

고추는 한국의 주요 경제 작물 중 하나이지만 재배과정에서 Colletotrichum acutatum에 기인한 탄저병이 많이 발생한다. 이의 방제를 위해 길항균인 Bacillus subtilis YGB36을 선발하여 16S rRNA 염기서열 및 생리·생화학적 분석을 통해 Bacillus subtilis로 동정하고 이를 생물학적 방제제로 개발하고자 실험을 진행하였다. In vitro screening에서 YGB36은 Cylindrocarpon destructans에 강한 항균활성을 나타내었고, cellulase, protease, amylase, siderophore 생산 및 phosphate solubility를 보유하고 있었다. 이 균주의 배양액(10⁶ cfu/ml) 및 배양여액은 in vitro 실험에서 C. acutatum의 포자발아를 강하게 억제하였고, 고추 과실을 이용한 실내실험에서도 이 배양액이 탄저병 병반의 진전을 억제하였으며, 방제가는 65.7%로 나타났다. 아울러 YGB36배양액은 고추 종자의 발아 및 초기 뿌리 생장을 촉진하였고, 온실에서의 식물 생장을 촉진하였다. 기존 화학농약과의 혼용 가능성 조사 결과, YGB36은 실험에 사용한 모든 살충제에서 생존에 영향을 전혀 받지 않았으며, 살균제 21종 중 11종에서 잘 생존하였다. 따라서 YGB36균주는 고추 탄저병에 대한 생물농약으로서의 잠재적 가치가 상당한 것으로 판단된다.

• 대한금속재료학회지
• /
• 제50권7호
• /
• pp.495-502
• /
• 2012

The aim of this study was to analyze high temperature deformation stability and properties of duplex stainless steels(DSS) according to annealing temperature. In order to analyze high temperature deformation stability, a number of compression tests were carried out with a stain rate of $10^{-2}s^{-1}{\sim}10s^{-1}$ up to a compression ratio of 50% in a temperature range of $950^{\circ}C-1300^{\circ}C$. The analysis of high temperature deformation stability of DSS was performed based on the Ziegler model. In order to analyze the high temperature properties of DSS, annealing treatments were conducted by isothermal holding for 1 hr at $950^{\circ}C$ to $1300^{\circ}C$ with $50^{\circ}C$ intervals followed by water cooling. The hardness and tensile tests were performed on specimens with different volume fractions of constituent phases, such as austenite, ferrite and sigma. The hardness and tensile strength of 2507 according to the annealing temperature are better than those of 2205. The strain rate sensitivity and Ziegler parameter are higher in 2205 than in 2507 as a whole, which implies that 2205 is better than 2507 in terms of forgeability at high temperature.

• Journal of Dairy Science and Biotechnology
• /
• 제37권4호
• /
• pp.223-236
• /
• 2019

본 연구는 김치로부터 비만 억제능력이 있는 젖산균을 분리 및 동정하고, 이 균주의 생리적 특성을 규명하여 상업적으로의 이용가능성을 검토하고자 실시하였다. 이를 위해 Modified MRS 분별배지를 사용하여 노란색 집락을 형성하는 균주를 대상으로 각각 α-amylase inhibitory activity, α-glucosidase inhibitory activity와 단쇄지방산 생산이 우수한 균주를 선발한 결과, KI69 균주가 최종 선발되었다. KI69 균주는 α-amylase억제활성 91.17±2.23%, α-glucosidase 억제활성 98.71±4.23%, 단쇄지방산인 프로피온산, 에세트산, 브티르산이 MRS broth에서 각각 8.78±1.12 ppm, 1.34±0.07%(w/v), 0.876±0.003 g/kg이 나타났으며, 동정결과 L. plantarum으로 판명되었고, L. plantarum KI69로 명명하였다. L. plantarum KI69는 답즙산과 산성의 pH에서 모두 우수한 생존력을 나타내었고, 효소활성은 β-galactosidase, β-glucosidase와 N-acetyl-β-glucosaminidase에 대해 높은 효소 활성을 나타내었다. 항생제 내성 실험 결과 vancomycin에 내성이 있는 반면 penicillin-G와rifampicin에 감수성을 나타냈으며, Escherichia coli, Salmonella Typhimurium, Listeria monocytogenes와 Staphyloccous aureus에 대해 각각 15.44%, 50.79%, 58.62%와 37.85%의 억제 효과를 지니고 있는 것으로 나타났다. 장 부착성은 대조구인 L. rhamnosus GG보다 우수하였다.

• 한국어병학회지
• /
• 제10권2호
• /
• pp.153-164
• /
• 1997

양식넙치에 분리한 Yersisnia sp. 의 일부 특성과 병원성을 조사하였다. 넙치의 입주변 및 체표에 궤양을 유발한 원인균의 생화학적 생물물리학적 특성을 조사한 결과 이들 균은 Yersisnia sp. (KF-1)로 동정 되었다. 이들 분리균주의 발육 최적 pH는 9.0이었고, 최적 NaCl농도는 1% 이었다. Yersinia sp. (KF-1)의 전체세포를 SDS-PAGE로 분석한 결과 세포를 구성하고 있는 단백질의 분자량은 14.0-100.6kd로써 총 28개의 peptide 밴드로 구성되어 있으며, 32.8kd의 분자량을 갖는 밴드가 주밴드로 생각된다. 병원성 시험에서 KF-1을 $1.0{\times}10^7$cfu/fish 감염시킨 시험구에서 감염 60시간후에 10마리중 9마리가 폐사되었으며, $1.0{\times}10^7$cfu/fish를 감염시킨 시험구에서는 감염 60시간후에 5마리가 폐사되어 $LD_{50}$은 $1.0{\times}10^7$cfu/fish로 추정되었다. 항생제 감수성 시험에서 KF-1은 chloramphenicol, gentamycin, kanamycin, neomycin, streptomycin, pefloxacin에 감수성을 나타냈고, erythromycin에는 중등도였으며, ampicllin, cephalothin, sulfamethoxazole/trimethoprim, tetracycline, vancomycin에는 저항성을 나타냈다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.250-254
• /
• 2002

Intergranular corrosion of austenitic stainless steels is a conventional and momentous problem during welding and high temperature use. One of the major reasons for such intergranular corrosion is so-called sensitization, i.e., chromium depletion due to chromium carbide precipitation at grain boundaries. Conventional methods for preventing sensitization of austenitic stainless steels include reduction of carbon content in the material, stabilization of carbon atoms as non-chromium carbides by the addition of titanium, niobium or zirconium, local solution-heat-treatment by laser beam, etc. These methods, however, are not without drawbacks. Recent grain boundary structure studies have demonstrated that grain boundary phenomena strongly depend on the crystallographic nature and atomic structure of the grain boundary, and that grain boundaries with coincidence site lattices are immune to intergranular corrosion. The concept of "grain boundary design and control", which involves a desirable grain boundary character distribution, has been developed as grain boundary engineering. The feasibility of grain boundary engineering has been demonstrated mainly by thermomechanical treatments. In the present study, a thermomechanical treatment was tried to improve the resistance to the sensitization by grain boundary engineering. A type 304 austenitic stainless steel was pre-strained and heat-treated, and then sensitized, varying the parameters (pre-strain, temperature, time, etc.) during the thermomechanical treatment. The grain boundary character distribution was examined by orientation imaging microscopy. The intergranular corrosion resistance was evaluated by electrochemical potentiokinetic reactivation and ferric sulfate-sulfuric acid tests. The sensitivity to intergranular corrosion was reduced by the thermomechanical treatment and indicated a minimum at a small roll-reduction. The frequency of coincidence-site-lattice boundaries indicated a maximum at a small strain. The ferric sulfate-sulfuric acid test showed much smaller corrosion rate in the thermomechanically-treated specimen than in the base material. An excellent intergranular corrosion resistance was obtained by a small strain annealing at a relatively low temperature for long time. The optimum parameters created a uniform distribution of a high frequency of coincidence site lattice boundaries in the specimen where corrosive random boundaries were isolated. The results suggest that the thermomechanical treatment can introduce low energy segments in the grain boundary network by annealing twins and can arrest the percolation of intergranular corrosion from the surface.

• 한국식품과학회지
• /
• 제29권5호
• /
• pp.1016-1020
• /
• 1997

본 연구는 Escherichia coli O157:H7 균주를 살균하고자 감마선 단독 및 가열과의 병용처리 효과를 조사하였다. E. coli O157:H7 균주의 가열 단독처리시 D값은 $50^{\circ}C$에서 129.2분, $55^{\circ}C$에서 27.1분, $60^{\circ}C$에서 2.4분으로 나타났다. E. coli O157:H7 균주는 0.03 M cysteine, 1% sodium citrate 및 5% sucrose가 첨가된 배지에서는 열에 대한 저항성이 증가하였고 1%, meat extract, 1% casein 및 1% casamino acid가 첨가된 배지에서는 감소하였다. 감마선 단독처리시는 $D_{10}$ 값과 불활성화 계수가 0.116 kGy와 $17{\sim}25$ 이였으나 가열과의 병용처리시는 약 0.07 kGy와 $25{\sim}41$로 나타났다. 이로서 가열과 방사선의 병용처리는 E. coli O157:H7 균주의 방사선 감수성을 현저하게 상승시켜 본 균주의 살균에 효과적이었다.