• Applied Microscopy
• /
• v.17 no.1
• /
• pp.47-64
• /
• 1987

Morphological difference of the renal glomerulus at different age groups have been studied in young (three month-old), adult (twelve month-old) and old (thirty month-old) Fisher strain 344 rats. Pieces of the tissues were taken from renal corticies prefixed with 2.5% glutaraldehyde-1.5% paraformaldehyde (0.1 M Millonig's phosphate buffer, pH 7.3), following by post-fixation with 1% osmium tetroxide (0.1 M Millonig's phosphate buffer, pH 7.3) and embedded within Araldite. The ultrathin sections contrasted with uranyl acetate and lead citrate were observed under a JEM 100CX electron microscope. The mean thickness of glomerular basal lamina and Bowman's capsule were determined by measuring the thinnest portion of basal lamina, and by taking the average of 50 readings from electron micrographs at different ages. The numerical changes of the slit pores were compared based upon the numbers over the length of 10um of glomerular basal lamina. The results were as follow: 1. The thickness of glomerular basal lamina is increased during aging; 140.4 nm in young rats, 270.0 nm in adult ones, and 437.8 nm in old ones. 2. The thickness of basal lamina of parietal cells of Bowman's capsule is 187.5 nm in young rats, 914.0 nm in adult ones, and 2850.0 nm in old ones. 3. The numbers of the slit pores of basal lamina are reduced during aging, 30.3 slit pores/$10{\mu}m$ in adult ones, and 24.2 slit pores/$10{\mu}m$ in old ones. 4. Accumulation of dense intracytoplasmic filamentous material in the parietal cells of Bowman's capsule is increased in the vicinity of the basal lamina during aging. The proximal tubule-like epithelial cell in Bowman's capsule is observed at one glomerulus in a young rat. 5. The endothelial cells are edematous and form balloon-like structure protruding into capillary lumen in young and old rats. 6. Cytoplasm of the podocyte shows a variety of alteration during aging, such as swelling of mitochondria and of endoplasmic reticulum, and increase of microtubules, microfilaments, lysosomes and lamellated myelin structures, etc. Accumulation of dense intracytoplasmic material in the foot processes is increased in the vicinity of the basal lamina during aging. The podocytic membrane-like structures are seen in young and o]d rats. 7. The mesangial matrices and mesangial cells are increased during aging, and slight swelling of endoplasmic reticulum and Golgi cisternae in young and old rats.

• Journal of Periodontal and Implant Science
• /
• v.36 no.2
• /
• pp.531-554
• /
• 2006

Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant- bone interface, Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA, A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of lOON were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal. bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type N. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model.

• Geomechanics and Engineering
• /
• v.16 no.3
• /
• pp.273-284
• /
• 2018

A detailed understanding of the mechanical behaviors for crushed coal rocks after grouting is a key for construction in the broken zones of mining engineering. In this research, experiments of grouting into the crushed coal rock using independently developed test equipment for solving the problem of sampling of crushed coal rocks have been carried out. The application of uniaxial compression was used to approximately simulate the ground stress in real engineering. In combination with the analysis of crack evolution and failure modes for the grouted specimens, the influences of different crushed degrees of coal rock (CDCR) and solidified grout strength (SGS) on the mechanical behavior of grouted specimens under uniaxial compression were investigated. The research demonstrated that first, the UCS of grouted specimens decreased with the decrease in the CDCR at constant SGS (except for the SGS of 12.3 MPa). However, the UCS of grouted specimens for constant CDCR increased when the SGS increased; optimum solidification strengths for grouts between 19.3 and 23.0 MPa were obtained. The elastic moduli of the grouted specimens with different CDCR generally increased with increasing SGS, and the peak axial strain showed a slightly nonlinear decrease with increasing SGS. The supporting effect of the skeleton structure produced by the solidified grouts was increasingly obvious with increasing CDCR and SGS. The possible evolution of internal cracks for the grouted specimens was classified into three stages: (1) cracks initiating along the interfaces between the coal blocks and solidified grouts; (2) cracks initiating and propagating in coal blocks; and (3) cracks continually propagating successively in the interfaces, the coal blocks, and the solidified grouts near the coal blocks. Finally, after the propagation and coalescence of internal cracks through the entire specimens, there were two main failure modes for the failed grouted specimens. These modes included the inclined shear failure occurring in the more crushed coal rock and the splitting failure occurring in the less crushed coal rock. Both modes were different from the single failure mode along the fissure for the fractured coal rock after grouting solidification. However, compared to the brittle failure of intact coal rock, grouting into the different crushed degree coal rocks resulted in ductile deformation after the peak strength for the grouted specimens was attained.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.201-209
• /
• 2015

The deformed degree of car body varies largely with the collision part from side collision of car-to-car. In case of deformation of car body caused by collision, the movement is different as speed energy changes to strain energy. Generally, in the analysis of traffic accident, the movement of car after the collision is analyzed by law of conservation of motion and the error of energy absorption rate along the deformation of car body can be calibrated by inputting coefficient of restitution, but it is current situation that coefficient of restitution applied by referring to the research results of forward collision and backward collision because the research results of side collision is rare. Vehicle model of finite element method applied by structure of car body and materials of each component was analyzed by explicit finite element method, and coefficient of restitution and collision detection time along contact part of side collision was drawn by analyzing the results. Analysis result acquired through the law of conservation momentum by applying finally-computed coefficient of restitution and crash detection time compared to collision result of actual vehicle. As a result, the reliability of analysis was higher than the existing analysis method were acquired when applying the drawn initial input value that used finite element method analysis model.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.1
• /
• pp.30-34
• /
• 2016

In this paper, we report that selective etching on N-polar face by EC (electro-chemical)-etching effect on the reduction of bowing and strain of FS (free-standing)-GaN substrates. We applied the EC-etching to concave and convex type of FS-GaN substrates. After the EC-etching for FS-GaN, nano porous structure was formed on N-polar face of concave and convex type of FS-GaN. Consequently, the bowing in the convex type of FS-GaN substrate was decreased but the bowing in the concave type of FS-GaN substrate was increased. Furthermore, the FWHM (full width at half maximum) of (1 0 2) reflection for the convex type of FS-GaN was significantly decreased from 601 to 259 arcsec. In the case, we confirmed that the EC-etching method was very effective to reduce the bowing in the convex type of FS-GaN and the compressive stress in N-polar face of convex type of FS-GaN was fully released by Raman measurement.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.21 no.2
• /
• pp.203-220
• /
• 1991

The purpose of this study was to investigate the changes of morphology and structure of bone tissue, caused by administration of high-dose hydrocortisone, elcatonin and cyclophosphamide. In order to carry out experiment, 60 four-week old Sprague-Dawley strain rats weighing about 107 gms were selected and divided into experimental group and control group. The experimental group was subdivided into three groups, assigned fifteen rats for each group, by the different drugs administered. Each experimental group was then categorized as follows: hydrocortisone 30㎎/㎏ b.w. with daily subcutaneous injection, elcatonin 20U/㎏ b.w. with daily subcutaneous injection, and cyclophosphamide 100㎎/㎏ b.w. with a single intraperitoneal injection. Fifteen rats were injected daily with 5㎖/㎏ b.w. of normal saline solution subcutaneously in control group. Rats in control group and experimental group were serially sacrificed on the 6th, the 15th and the 22nd day after injection of normal saline, hydrocortisone, elcatonin and cyclophosphamide, respectively. Being sacrificed, both sides of mandibular condyles were removed and fixed with 10% neutral formaline. The one side of mandibular condyles was radiographed with soft X-ray apparatus. Thereafter, the obtained radiographs were observed, and the bone density of condylar head and condylar neck regions was measured by use of transferring video-based digital radiograph. The other side was further decalcified and embedded in paraffin as usual manner, then sectioned and stained with hematoxylin and eosin, observed by light microscope. The obtained results were as follows: 1. Sclerotic changes with regularly increased trabecular pattern were seen throughout experimental periods in hydrocortisone group. Increased the number of trabecular pattern with irregularity and periodic striation on the periphery of condylar head region were appeared with lapse of time in elcatonin group. In cyclophosphamide group, irregular trabecular pattern and stippled radiopacities on mandibular condyle were observed with lapse of time. 2. The bone density of condylar head region was increased in hydrocortisone group, decreased in elcatonin group, and tended to be decreased in cyclophosphamide group, compared with that of control group according to the experimental periods. 3. The bone density of condylar neck region tended to be rather increased in hydrocortisone group, elcatonin group and cyclophosphamide group, depending on the experimental periods. 4. In microscopic studies, there were irregular trabecular bonds and osteoblastic activity in hydrocortisone group and elcatonin group throughout experimental periods, degenerative cartilage and trabecular bones in the 6th day and densely calcified trabecular bones in the 22nd day in cyclophosphamide group.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.22 no.2
• /
• pp.241-252
• /
• 1992

The purpose of this study was to investigate the changes of morphology and structure of bone tissue in the irradiated mandibular bone in rats which were fed a low calcium diet. In order to carry out this experimant, 64 seven-week old Sprague-Dawley strain rats weighing about 150gms were selected and equally divided into one experimental group of 32 rats and one control group with the remainder. The experimental group and the control group were then subdivided into two groups when the rats reached ten-week old, 16 were assigned rats for each subdivided group, exposed to irradiation. The two irradiation groups received a single dose of 20 Gy in the jaws area only and irradiated with a cobalt-60 teletherapy unit. The rats in the control and experimental groups were serially terminated by fours on the 3rd, the 7th, the 14th, and the 21st day after irradiation. Following termination, both sides of the dead rats mandibular bodies were removed and fixed with 10% neutral formalin. One side of the mandibular body was radiographed with a soft X-ray apparatus. Thereafter, the obtained microradiographs were observed by a light microscope. The remaining side of the mandibular bone was further decalcified and embedded in paraffin as using the general method. The specimen sectioned and stained with hematoxylin and eosin, and Rabit Anti-Human Tumor Necrosis Factor-a, observed by a light microscope. The obtained results were as follows: 1. Microradiogram revealed that thinning of the cortex and a decrease in the trabecula of the interradicular bone and mandibular body were observed and noted from the start to finish throughout the experiment in the non-irradiated rats on the low calcium diet rather than in the non-irradiated rats on the normal diet. In microscopic observations, there were marked osteolytic changes in the center of the bone marrow. 2. Microradiogram revealed that thinning of the cortex and a decrease in the trabecula of interradicular bone and mandibular body were more marked after 7 days in the irradiated rats on the low calcium diet rather than in the non-irradiated rats on the low clacium diet. In microscopic observations, osteoblasts were decreased markedly after 7 days, and a few osteoclasts were observed. 3. Microradiogram revealed that thinning of the cortex and a decrease in trabecula of interradicular bone and the mandibular body were more marked from the strart to finish troughout the experiment in the irradiated rats on the low calcium diet rather than in the irradiated rats on the normal diet. In microscopic observations, there were no osteolytic changes noted in the irradiated rats on the normal diet. 4. In immunocytochemical findings, a few bone marrow cells including Tumor Necrosis Factor were observed in the irradiated rats on the normal diet, but was not observed in the rats on the low calcium diet.

• Tunnel and Underground Space
• /
• v.22 no.5
• /
• pp.346-353
• /
• 2012

Multi-specimen uniaxial compression test has been carried out in order to find the method to determine the five independent elastic constants from a single standard specimen of a transversely isotropic rock. Total 35 specimens of 7 different angles from a large block of rhyolite presenting the flow structure obviously are used in tests. This second report is to focus on the statistical evaluation of measured strains and analyzed elastic constants. And the determination of their true or near-true values is discussed. As the result of RSD analysis, it turns out that the reliability of measured strains is sufficiently obtained and Saint-Venant approximation is well applicable except 15 degree angled specimen in tests. RSD is decreasing on the increase of the angle of anisotropy. This tendency may be caused not only by the decreasing of the deviation of measured strains, but also by the better applicability of Saint-Venant approximation on the increase of angle. It can be concluded that the analyzed values are considered the near-true ones of five independent constants on the high reliability. But the variation of the apparent Young's modulus expected by these values is not proved to match the measured tendency. It is inferred that the factor to decrease the apparent Young's modulus and/or to increase the shear strain, is present in the test or in the nature of the anisotropy in consideration of this inconsistency.

• Research in Plant Disease
• /
• v.15 no.3
• /
• pp.222-229
• /
• 2009

A Pseudomonas strain SG3 producing biosurfactant and showing antifungal and insecticidal activities was isolated from agricultural soil severely contaminated with machine oils. The antagonistic bacterium inhibited mycelial growth of all of the tested fungal pathogens. The fermentation broth of SG3 also effectively suppressed the development of various plant diseases including rice blast, tomato gray mold, tomato late blight, wheat leaf rust, barley powdery mildew and red pepper anthracnose. An antifungal substance was isolated from the fermentation broth of SG3 by ethyl acetate partitioning, silica gel column chromatography and preparative HPLC under the guide of bioassay. The chemical structure of the antifungal substance was determined to be rhamnolipid B by mass and NMR spectral analyses. The antifungal biosurfactant showed a potent in vivo antifungal activity against gray mold and late blight on tomato plants. In addition, rhamnolipid B inhibited mycelial growth of B. cinerea causing tomato gray mold and zoospore germination and mycelial growth of P. infestans causing tomato late blight. Pseudomonas sp. SG3 producing rhamnolipid B could be used as a new biocontrol agent for the control of plant diseases occurring on tomato plants.

• Restorative Dentistry and Endodontics
• /
• v.22 no.2
• /
• pp.505-518
• /
• 1997

The objective of this investigation was to compare the effects of water storage on the aspect of hardness and diametral tensile strengths of four hybrid glass ionomer cements(two compomers and two resin-reinforced glass ionomers) with a resin composite material. One composite resin(Degufill Ultra), two compomers(Dyract, Compoglass Cavifil), and two resin-reinforced glass ionomers(Fuji Duet, Vitremer) were used in this study. Cylindrical specimens were prepared and stored at $36{\pm}1^{\circ}C$ in distilled water for 10 minutes after set, and then tested on an Instron testing machine(No.4467) at 1.0 mm/min displacement rate. Vicker's hardness and diametral tensile strengths as time elapsed were measured after aging in water for 10 minutes, 1 hour, 3 hours, 1 day, 3 days, 5 days and 7 days at $36{\pm}1^{\circ}C$. During the test of diametral tensile strength, stress-strain curves were obtained, from which the compressive modulus were calculated and compared. The structure of four set glass ionomer cement mass was observed on SEM(Hitachi, S-2300) after being etched with 9.6% hydrofluoric acid for 1 minute. The results were as follows; 1. The hardness of the experimental group(compomer and the resin reinforced glass ionomer cement) did not exceed the value of control group(Degufill Ultra). 2. Vicker's hardness of the Fuji Duet tended to increase succeedingly, Dyract was decreased after 3 hours in water, and Vitremer was the lowest. 3. The control group(Degufill Ultra) presented progressively on increased diametral tensile strength with time, Fuji Duet were decreased after 3 days, Compoglass Cavifil and Vitremer were decreased after 5 days in water storage. 4. Compressive modulus of the control group(Degufill Ultra) and Dyract were increased sharply timely, Fuji Duet and Vitremer were increased smoothly by lapse of time in water. Fuji Duet were stronger than Vitremer. On the other hand, Vitremer exhibited the lowest toughness. 5. The microstructure of compomer was similar with that of the composite resin(Degufill Ultra), and the fillers in resin-reinforced glass ionomer cements were noticed. It can be concluded that mechanical properties of hybrid glass ionomer cements is weaker than composite resin, and that the compomers or the resin-reinforced glass ionomers can not substitute the composite resins. A plenty of considerations should be done on the application of them to the area under the loading and high wear has a little adverse effect on the mechanical properties on the water storage for 7 days. The further research should be needed to confirm the advantage of the compomer.