• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.621-624
• /
• 1998

This paper presents a new configuration of dielectric bandpass filter using the comb-line filter design theory. This filter is composed of a homogeneous dielectric monoblock $(\varepsilonr=35.5)$ with two metal post and a dielectric sheet $(\varepsilonr=9.8).$ In this structure, the RF leakage is suppressed without other shield housing. For the fabricated filter, insertion loss value in the passband region was 0.9dB(Max.) and return loss value was 19dB(Min). Also, this filter has a attenuation pole in the stopband.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.59-62
• /
• 2002

In this paper, low-pass filters using DGS-CPW cell are suggested. The bandwidth of stopband is extended up to 3 times of cutoff frequency. The novel DGS-CPW cell reduces the size of the circuit. This structure can be used in microwave and milimeter-wave circuits.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.437-441
• /
• 1987

We have studied a new technical approach for the design of digital FIR filters with flatness in the passband, and equiripple attenuation in the stopband using the program of J.H. McClellan, T.W.Parks, L.R.Rabiner and the flatness property. The design technique directly loads to structures that have low passband sensitivity properties.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.6
• /
• pp.37-42
• /
• 1983

The TV IF SAW filter if designed using the windowing method. The procedure for fabricating SAW filters is described. The filter is fabricated on the Y-cut, Z-propagation LiNbO3 wafer. The passband ripple and the smaller upper sidelobe attenuation are obseryed. Further improvements and the mass production can be expected.

• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.563-566
• /
• 2000

Sampling rate conversion widely used in subband coding, A/D and D/A transitions etc. is an important techniques Nyquist filters and the filter banks have been used for the sampling converter. However, they need many memories and, whenever the sampling rate is changed, it is necessary to design filters. So the objective of this paper is to present a new kernel that is quick to evaluate and has a good stopband performance.

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.153-160
• /
• 2007

In this paper, the exact analysis of the parallel coupled line with open stub is presented. This structure shows LPF characteristics with broad stopband and sharp skirt characteristics. We derived the exact Z-matrix expression of the structure. In order to show the validation of the expression we designed $3^{th}$ order Chebyshev LPF using the structure. The simulated data excellently agreed with the predicted values by the calculation using the derived expression.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.4
• /
• pp.571-577
• /
• 1986

In this paper, we have investigated pole-zero shifting due to variable stopband frequency Ws and passband ripple Ap of elliptic function filters. Also we have studied the phase, group-delay, unit step response and impulse response of elliptic filters. We show that in the passband the phase linearity improves as Ws increases, and eventually it approaches that of a chebyshev function filter.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.11-21
• /
• 1999

This paper has been proposed a structure composed of FIRs and IIR filters as digital interpolation filter to integrate the off-chip analog low-pass filter of audio DAC. The passband ripple (>$0.41{\times}fs$), passband attenuation(>at$0.41{\times}fs$) and stopband attenuation(<$0.59{\times}fs$) of the ${\Delta}{\Sigma}$ modulator output using the proposed digital interpolation filter had ${\pm}0.001[dB]$, -0.0025[dB] and -75[dB], respectively. Also the inband group delay was 30.07/fs[s] and the error of group delay was 0.1672%. Also, the attenuation of stopband has been increased -20[dB] approximately at 65[kHz], out-of-band. Therefore the RC products of analog low-pass filter on chip have been decreased compared with the conventional digital interpolation filter structure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.201-206
• /
• 2015

A new electronically stopband tunable filter is proposed with three-input single-output using Operational Transconductance Amplifier (OTA) in this paper. The proposed filter provides band pass, low pass and high pass multifunctional responses. Centre frequency ($f_c$) and quality factor (Q) of the realized filters could independently tuned without disturbing each other. Various network sensitivity and non-ideal characteristic analysis are done to check the sensitivity and parasitic effect of different circuit parameters. The CMOS realization of filter is done with 1.8V-0.18um process parameters and HSPICE simulation results are presented to assert the presented theory.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.4 s.316
• /
• pp.70-77
• /
• 2007

Two kinds of QMF(Quadrature Mirror Filter) pairs are used in JPEG2000 standard, which don't have QMF distortions. However, the QMF pairs have the main disadvantages such that there are gentle roll-off rate, ripples in the passband and unequal band decomposition. In this paper, Maxflat(maximally flat) QMF pairs with a half-band gain are proposed for overcoming these problems. Maxflat QMF pairs are realized due to generalized closed-form formulas, and the filters have maximally flat response in the passband/stopband as well as sharp roll-off rate in the transition band. Comparing proposed filters and JPEG2000's filters in frequency domain, it is found that proposed filters have better performance JPEG2000's filters. Moreover, Maxflat QMF pairs show stopband-attenuation exceeding 200 dB almost everywhere.