• Journal of the Korean Institute of Telematics and Electronics
• /
• 제25권6호
• /
• pp.663-671
• /
• 1988

In this paper, in order to reduce the blocking effect of block coded images, we propose the method considering the lowpass and bandpass components of Granrath's human visual model. This method consists of two-stage enhancement procedure. The first step is lowpass filtering which smooths out the blocking effect, and the second step is a high frequency enhancement procedure to increase the contrast decreased by the lowpass filtering in the first step. In the first step, the one-dimensional Gaussian filter which aligthns parallel to the edge direction is considered to preserve the edge in the block and the two-dimensional Gaussian filter is used to smooth out the blocking effect near the block boundaries. In the second step, the lowpass and bandpass components of the Granrath's model are considered to increase contrast in a restored image. The performance comparison of the proposed method and the existing mehtods is made by a computer simulation with several block coded images. We can see that the enhancement in the subjective quality of images of the proposed method is more significant than the enhancement in the subjective quality of images of the proposed method is more significant than the existing methods, though the proposed method does not show better performance on the PSNR gain, the poor measure of picture quality for block coded images.

• Journal of Surface Science and Engineering
• /
• 제43권1호
• /
• pp.17-24
• /
• 2010

In this study, surface characteristics of dental implant fixture with various manufacturing process have been researched using electrochemical methods. The dental implant fixture was selected with 5 steps by cleaning, surface treatment and sterilization with same size and screw structure; the 1st step-machined surface, 2nd step-cleaned by thinner and prosol solution, 3th step-surface treated by RBM (resorbable blasting media) method, 4th step-cleaned and dried, 5th step-sterilized by gamma-ray. The electrochemical behavior of dental implant fixture has been evaluated by using potentiostat (EG&G Co, 2273A) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The corrosion surface was observed using field-emission scanning electron microscopy (FE-SEM) and energy dispersive x-ray spectroscopy (EDS). The step 5 sample showed the cleaner and rougher surface than step 3 sample. The step 5 sample of implant fixture treated by RBM and gamma sterilization showed the low corrosion current density compared to others. Especially, the step 3 sample of implant fixture treated by RBM was presented the lowest value of corrosion resistance and the highest value of corrosion current density. The step 3 sample showed the low value of polarization resistance compared to other samples. In conclusion, the implant fixture treated with RBM and gamma sterilization has the higher corrosion resistance, and corrosion resistance depends on the step of manufacturing process.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제17권3호
• /
• pp.205-212
• /
• 2012

This paper proposes the fuzzy logic based variable step-size MPPT (Maximum Power Point Tracking) method for the stability at the steady state and the improvement of the transient response in the wind power system. If the change value of duty ratio is set on stability of the steady state, MPPT control traces to maximum power point slowly. And if the change value is set on improvement of the transient response, the system output oscillates at the maximum power point. By adjusting the step size with fuzzy logic, it can be improved the MPPT response speed and stability at steady state when MPPT control is performed to track the maximum power point. The effectiveness of the proposed method has been verified by simulations and experimental results.

• Journal of Communications and Networks
• /
• 제12권6호
• /
• pp.600-604
• /
• 2010

A method of width adaptation in the radial basis function network (RBFN) using stochastic gradient (SG) algorithm is introduced. Using Taylor's expansion of error signal and differentiating the error with respect to the step-size, the optimal time-varying step-size of the width in RBFN is derived. The proposed approach to adjusting widths in RBFN achieves superior learning speed and the steady-state mean square error (MSE) performance in nonlinear channel environment. The proposed method has shown enhanced steady-state MSE performance by more than 3 dB in both nonlinear channel environments. The results confirm that controlling over step-size of the width in RBFN by the proposed algorithm can be an effective approach to enhancement of convergence speed and the steady-state value of MSE.

• Journal of the Korea Safety Management & Science
• /
• 제14권1호
• /
• pp.117-122
• /
• 2012

This paper deals with the productivity increment through construction of lean production system for automobile factory in China. This lean production system has been progressed according to 5 steps. Step 1 is the work preparation. Step 2 is the process design. Step 3 is the establishment of method to count production quantity. Step 4 is the establishment of measuring method for input and output. Finally, step 5 is the construction of flexible production system able to adapt for environment change. This lean production system is expected to obtain the productivity increment by 50% for plastic plant and reduction by 50% in inventory quantity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• 제26권3호
• /
• pp.89-94
• /
• 2016

In this study, the crystalline property of a-plane GaN epitaxial layer grown on r-plane sapphire by a HVPE method has been investigated according to the V/III ratio and the growth time of multi-step growth. Furthermore, these results were compared with the previous result obtained from the single-step growth of a-plane GaN on r-plane sapphire substrate. In the multi-step growth for a-plane GaN epitaxial layer on r-plane sapphire, the FWHM values of rocking curve in GaN epitaxial layer were decreased as the HCl source flow rate and the growth time were increased. The void formed in epitaxial layer was continuously decreased as the growth time in first step and second step using a higher HCl flow rate was increased. As a result, the GaN layer obtained with the longest growth time on the first step and second step exhibited the lowest FWHM values of 584 arcsec and the smallest dependence of azimuth angle.

• Journal of the Korea Institute of Building Construction
• /
• 제5권3호
• /
• pp.83-90
• /
• 2005

Was used at step space-time mainly after VE technique sponsors in domestic in the 1960s but have been expanded to design step recently. Possibility of value elevation or cost reduction must choose member that is effectively for active and effective application of VE technique. In this study, when enforce design VE examining for weight decision corrosion protection been using in weight grant composition estimation technique, target choice process wishes to suggest formality and method that can be achieved effectively Main conclusion of this study sorts valuation items step by step for weight appropriation of valuation basis and give point on article of high position point after expert which employer is included estimates article by low rank step and this presented high position method that do union item by item and establishes by item weight. Did these techniques for giving weights so that importance for weight appropriation developed estimation program, and data save of target estimation standard and target estimation standard is possible using straight sit.

• Korean Journal of Computational Design and Engineering
• /
• 제13권2호
• /
• pp.109-120
• /
• 2008

ISO 10303-112 is an integrated application resource of ISO 10303, commonly known as STEP, and specifies the procedural_sketch schema. The ISO 10303-112 provides general resources for the representation of modeling commands for the exchange of procedurally represented 2D CAD models. Procedural models have the advantage of being easy to edit, simply by changing values of parameters of their constructional operations. Such models are said to embody design intent, in the sense that modifications to them conform to the method of creation used by their original creator, and they also comply with any constraints implied by the particular constructional operations used. This paper introduces the development and standardization process of the ISO 10303-112, and describes the concept of procedural 2D CAD modeling, the way to represent the procedural 2D CAD models in STEP and the harmonization with other STEP resources.

• 연구논문집
• /
• 통권31호
• /
• pp.65-75
• /
• 2001

A dynamic model of pump having one step gearbox and two step gearbox is developed by the lumped parameter method. The model accounts for shafts, ball bearings and journal bearings flexibilities, gyroscopic effects and the force couplings among the transverse and torsion motions due to gearing. Excitation forces of pump having one step gearbox and two step gearbox are considered as the mass unbalance of the rotors and gear transmission error which comes from the modified tooth surface. A Campbell diagram, in which the excitation sources caused by the mass unbalance of the rotors and the transmitted errors of the gearing are considered, shows that there are no critical speeds at the operating speeds. One step and two step gearboxes are manufactured and are estimated for vibration/noise, lubrication and performance.

• Journal of the Korea Safety Management & Science
• /
• 제11권4호
• /
• pp.201-211
• /
• 2009

The types and quantities of Hazmat and Hazmat transportation are gradually increasing, keeping pace with industrialization and urbanization. At present the safety management for Hazmat transportation only considers reducing accident probability, but even when an accident involving Hazmat-carrying vehicles occurs, that is not regarded as a Hazmat-related accident if the Hazmats do not leak out from the containers carrying them. Thus the methods to reduce risk (Risk=Probability$\times$Consequence) have to be developed by incorporating accident probability and consequence. By using Geographic Information System (GIS), a technical method is invented and is automatically able to evaluate the consequence by different types of Hazmat. Thus this study analyzed the degree of risk on the links classified by the Hazmat transport pathways. In order to mitigate the degree of risk, a method of 7-step risk management on Hazmat transportation in railway industries can be suggested. (1st step: building up GIS DB, 2nd step: calculating accident probability on each link, 3rd step: calculating consequence by Hazmat types, 4th step: determination of risk, 5th step: analysis of alternative plans for mitigating the risk, 6th: measure of effectiveness against each alternative, and 7th step: action plans to be weak probability and consequence by the range recommended from ALARP). In conclusion, those 7 steps are used as a standardization method of optimum transportation routing. And to increase the efficiency of optimum transportation routing, optional route can be revise by verification.