• 한국지반공학회지:지반
• /
• 제13권4호
• /
• pp.163-176
• /
• 1997

NATM 터널에서 강지보재로 이용되어지는 H형강은 그 동안 많은 단점이 지적되어 왔으며, 그 중 하나는 숏크리트 타설시 H형강 flange 배면에 발생하는 공동으로 인하여 숏크리트를 포함 한 초기지보재의 하중지지력 저감을 들 수 있다. 이와 같은 단점을 보완하기 위하여 유럽의 많은 나라에서는 H형강 지보재와 같은 plate girder 형태의 지보재에 비하여 많은 장점을 가진 fat twice girder(격자지보)라는 지보재를 개발하여 현장에 적용하고 있다. 터널 굴착시 격자지보를 초기 지보재로서 효율적으로 사용하기 위해서는 하중지지력에 대한 심도있는 연구가 필요하다. 따라서 본 연구에서는 격자지보의 하중지지력 평가 및 검증의 일환으로 격자지보에 대한 굴곡시험과 압축시험을 수행하였다. 그 결과 격자지보는 H형강 지보재에 비하여 우수한 하중지지력을 보유하는 것으로 나타났으며, 따라서 터널 시공시 지보재로서 효율적으로 적용할 수 있을 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제19권2호
• /
• pp.173-184
• /
• 2005

For reducing construction cost, two-plate-girder bridges are getting popular in Japan. This type of bridge employs a PC slab, which is often cast-in-place. In such a case, concrete is not usually cast over the whole slab at one time: some portions are constructed earlier than the rest. Therefore, a construction joint is inevitably created. Due to the drying shrinkage of concrete, tension stress may occur in concrete slab. High tensile stress can be expected near the construction joint where concretes with different ages meet. Moreover, prestressing is not applied over the whole length of slab at one time. This may also serve as a source of tensile stress in the slab. Thus there is a chance that cast-in-place PC slab, especially near the construction joint, may be subjected to tensile cracking. In the present study, stress states near the construction joint in the cast-in-place PC slab of a two-plate-girder bridge are investigated numerically. The finite element method is employed and the three-dimensional analysis is conducted to see the influence of dry shrinkage and prestressing. The stress states in the PC slab thus obtained are discussed. The simplified model of a plate girder for this class of analysis is also proposed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.455-458
• /
• 2005

The Steel-Confined Prestressed Concrete Girder(SCP Girder) has been developed, which maximizes structural advantages of components (concrete, steel plate and tendon) and can be used to construct the middle or long span bridge with low-height girder. And recently, a continuous beam type of SCP Girder has been being developed to decrease size and self weight of girder in comparison with a simply-supported type. In this study, as part of developing the continuous beam type of SCP Girder, a new type of anchorage zone is proposed in order to address tendons effectively and decrease section size of SCP Girder efficiently. And also, the experimental test was carried out using a real scale specimen to examine the behavior of proposed anchorage zone.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.240-245
• /
• 2005

There has been a strong demand on more economic and lower depth girder bridges for short and medium span range, PRECOM, which is a new type steel-concrete composite girder, has been developed to realize a more economic bridge system with a lower depth girder. In the PRECOM girder bridge, a steel plate girder is simply supported and then concrete form is hung to girder. Thus, the self-weight of the concrete is loaded to the steel girder. To increase the resistance of concrete in the lower casing against tensile stress, compressive force is introduced by prestressed tendon To evaluate the manufacturability and performances of the completed bridge, four 15-m girders and a bridge specimen with two 20m girders wvere constructed. The camber during the construction and introduction of an appropriate compressive force was evaluated. Dynamic data were obtained through the modal testing of the completed girders. Static loading test was also conducted to examine cracks and evaluate the decrease in stiffness and failure behavior under extreme conditions.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권3호
• /
• pp.111-119
• /
• 2022

모듈형 CFT 부재를 이용한 연속 강박스 거더의 단면강성 증대 및 프리스트레싱 공법은 긴장재로 프리스트레싱된 CFT 모듈을 강박스 거더 하부플랜지와 일체화한 후 긴장재를 제거함으로써 발생하는 CFT 모듈의 복원력을 강박스 거더 하부플랜지의 프리스트레싱력으로 이용하고 일체화된 CFT 모듈이 강박스 거더의 단면 강성을 향상시킨다. 본 연구에서는 CFT 모듈을 이용하여 일체화된 강박스 거더에 대한 프리스트레싱 도입의 적용성을 검토하기 위하여 하부플랜지를 모사한 실험체를 대상으로 CFT 모듈을 이용하여 프리스트레싱 도입 실험을 실시하고 유한요소해석으로 도입 프리스트레스를 평가하였다. 또한 실제 강박스 거더에 대한 프리스트레스 도입과 CFT 모듈을 통한 단면강성 증대효과를 확인하기 위하여 연속지점부에 적용 가능한 강박스 단면에 대하여 CFT 모듈에 도입된 프리스트레싱력 및 CFT 모듈의 단면제원에 따른 유한요소해석을 실시하고 이를 비교하였다.

• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1465-1486
• /
• 2016

Conventional plate I-girders are sensitive to local buckling of the web when they are subjected mainly to shear action because the slenderness of the web in out-of-plane direction is much bigger. The local buckling of the web can also cause the distorsion of the plate flange under compression as a thin-walled plate has very low torsional stiffness due to its open section. A new I-girder consisted of corrugated web, a concrete-filled rectangular tubular flange under compression and a plate flange under tension is presented to improve its resistance to local buckling of the web and distorsion of the flat plate flange under compression. Experimental tests on a conventional plate I-girder and a new presented I-girder are conducted to study the failure process and the failure mechanisms of the two specimens. Strain developments at some critical positions, load-lateral displacement curves, and load-deflection curves of the two specimens have all be measured and analyzed. Based on these results, the failure mechanisms of the two kinds of I-girders are discussed.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.141-146
• /
• 2001

A post-tensioned steel plate girder bridge with cross-beams is analyzed by specially orthotropic laminate theory. The cross-sections of both girders and cross-beams are WF types. The result is compared with that of the beam theory. This bridge with simple support is under uniformly distributed vertical load, and axial loads and moment due to post-tension. In this paper, finite difference method for numerical analysis of simple supported bridge is developed. Relatively exact solution is obtained even with small number of meshes. Theory and analysis method of specially orthotropic laminate plates used in this paper can be used in design of new bridges, and maintenance and repair of old bridges.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1450-1459
• /
• 2007

Line type rigid bearings for Open-Steel-Plate-Girder railway bridges have several problem in service, and they are unstable structurally. Thus, spherical bearings having advanced maintenance capability and device to resistance up-lift are developed and replace the existing ones. A experiment of maintenance for a new placed spherical bearings under real Open-Steel-Plate-Girder bridge is conducted and their good maintenance performance is proved. The dynamic behavior of the bridge is measured and analyzed for the two cases of the existing and replacing bearings. Therefore, the effect of the new spherical bearings on the railway bridge is assessed.

• 복합신소재구조학회 논문집
• /
• 제6권4호
• /
• pp.1-7
• /
• 2015

In this paper, we present the result of analytical investigation pertaining to the structural behavior of steel-concrete composite plate girder with arch-type web stiffener. In the arch-type web stiffener located in the compression side of web, infill concrete is cast to strengthen the arch-type stiffener and also to exert resisting force against compression force. This type of composite steel-concrete plate girder bridge is built and is in service. To understand the behavior thoroughly, analytical parametric study was conducted by using the finite element method. As a result it was found that the effect of arch-type stiffener with infill concrete is considerable for the design of such type composite girder bridge.

• 한국강구조학회 논문집
• /
• 제14권5호통권60호
• /
• pp.593-602
• /
• 2002

콘크리트와 강판, PS강재의 구조적 장점을 극대화하여 낮은 형고로 경간을 장대화할 수 있는 새로운 교량 상부구조형식으로서 강재로 구속된 프리스트레스트 콘크리트 합성거더(Steel-Confined Prestressed Concrete Girder; SCP Girder)를 개발하였다. 개발된 SCP 합성거더의 효과적인 설계 및 제작을 위하여 설계프로그램을 개발하고 제작절차를 확립하였다. 이를 바탕으로 설계된 SCP 합성거더를 실물크기로 제작하여 시공성을 확인하였으며, 재하실험을 통해 설계의 타당성과 구조적 안전성 및 실적용 가능성에 대하여 검증하였다.