• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.291-302
• /
• 2011

The study was to investigate whitening and antioxidation effects by determining the tyrosinase inhibition activity, DPPH radical scavenging and superoxide dismutase like activity of essential oils from Cryptomeria japonica and Chamaecyparis obtusa. The aim of the present study was to suggest preliminary data for research whitening and anti-oxidant effects material of C. japonica and C. obtusa essential oils and confirm supplementary worth of natural volatile organic compounds (nVOCs). Essential oils of C. japonica and C. obtusa leaves were extracted by steam distillation method of clevenger type, and nVOCs were extracted by high-temperature reactor for utilizing nVOCs condensates released during drying of C. japonica and C. obtusa at 80, 100, and $120^{\circ}C$ temperature conditions, respectively. In the activity of whitening and antioxidation, C. japonica oil was more effective than C. obtusa oil. nVOCs of C. japonica and C. obtusa showed highly activity of tyrosinase inhibitory at higher temperature. Antioxidation activity only shown on nVOCs of C. japonica produced at $120^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.947-953
• /
• 2012

In this study we investigated the manufacturing method for the activated carbon using the char from the pyrolysis of waste tire. The physical activation method using the steam in the fixed-bed quartz reactor was used for preparation of activated carbon. The primary experiment parameters are the activation temperature, activation time, heating rate, and the injection quantity of active agent. From the results of pore distribution of activated carbon, the micropore which was made in $850^{\circ}C$ of activation temperature, $5^{\circ}C$/min of heating rate, and 3 hours of activation time was developed in biggest quantity, and mesopore and macropore were developed in the biggest quantity too. The optimum conditions for producing the activated carbon using the pyrolysis residue were $850^{\circ}C$ of activation temperature, 3 hours of activation time, $5^{\circ}C$/min of heating rate, and 3 g $H_2O/char-g{\cdot}hr$ of active agent through this study. The produced activated carbon in these conditions showed that the potentiality of utilization as activated carbon because the BET specific surface area was $517.6m^2/g$ and total pore volume was $0.648cm^3/g$.

• Journal of Energy Engineering
• /
• v.22 no.4
• /
• pp.376-385
• /
• 2013

There are conflicts about energy price increase among government, producer, and consumer. The supplier insists on price increase for escaping running a deficit and business continuity, but the consumer concerns about worsening profitability and price rise. This study investigates the effects of energy rate increase on national economy using input-ouput(I-O) analysis. This study attempts to analyze the effects of national economy due to Coke and hard-coal, Naphtha, Gasoline, Kerosene, Light oil, Heavy oil, Liquefied petroleum gas, Electric utilities, Manufactured gas supply and Steam and hot water supply (using input-output table for the year 2011, Korea.) The results of the sectoral price changes due to a 10% increase in energy price that is obtained from the Leontief price model are presented in article. The result of this analysis is presented: The impact of the 10% increase in electricity rate on the general price level is estimated to be 0.2196%. In case of Kerosene, the impact is 0.1222%. It shows that Electric utilities are approximately 18 times larger price inducing effect as Kerosene. Also, this study indicates 3 years results sequentially to make it possible to observe trend. Then, study suggests balancing price by making each energy source adjusted.

• Journal of Applied Biological Chemistry
• /
• v.55 no.3
• /
• pp.185-189
• /
• 2012

This study was conducted to investigate the effect of different steam condition and dehydration condition on physicochemical characteristics of Olbyeossal made from Waxy rice. All samples were steamed at $95-100^{\circ}C$ for 60 min or at $121^{\circ}C$ for 20 min and then were dehydrated using hot air 45, 60, $80^{\circ}C$ and sun-dried to achieve moisture contents 13-15%. Initial pasting temperature of Olbyeossal was the lower than that of nontreatment sample by parboiling. The combination in steaming $95-100^{\circ}C$ and hot drying at $45-60^{\circ}C$ was showed appropriate pasting properties compared with other condition. The hardness of Olbyeossal was significantly affected by steaming and dehydration condition. The hardness of Olbyeossal showed the higher value for steaming at $121^{\circ}C$ than $95-100^{\circ}C$. The water binding capacity (WBC) and swelling power (SP) were higher steaming at $121^{\circ}C$ than $95-100^{\circ}C$. No significant differences on WBC and SP of Olbyeossal by dehydration condition were observed. As the sensory evaluation results, the combination in steaming at $121^{\circ}C$ and hot-air drying at 45 or $80^{\circ}C$ led to increase preference for appearance, color, taste and overall acceptability. These results indicate that steaming and dehydration condition were affecting factor on physicochemical characteristics of Olbyeossal.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.223.2-223.2
• /
• 2010

용융탄산염 연료전지(MCFC)는 $650^{\circ}C$에서 작동하는 고온형 연료전지 시스템이다. 이 시스템은 천연가스 등을 개질하여 생산된 수소를 바로 전기로 생산할 수 있는 시스템으로 열효율이 높으며, 현재 대체 발전시스템으로 각광을 받고 있다. MCFC는 개질방식에 따라 내부개질 방식과 외부개질 방식이 있다. 내부개질 방식은 수소를 생산하는 개질기가 스택내부에 장착된 형식으로 천연가스를 스택내부에서 개질하여 바로 전기를 생산하는 방식이다. 이 내부개질반응에 사용되는 촉매로는 알루미나에 담지된 니켈(Ni) 계열촉매이 주로 쓰이고 있다. 또한 내부개질촉매의 형태는 작은 원주형의 촉매형태로 성형되어 사용된다. 이 성형된 촉매의 크기가 바로 내부개질 스택의 크기를 결정하는 중요한 요소이다. 그래서 촉매의 크기는 되도록이면 작게 성형하는 것이 중요하다. 그러나 촉매의 크기가 너무 작으면 촉매를 성형하는데 큰 어려움이 생기게 된다. 본 연구에서는 니켈 촉매를 공침법이 아닌 균일용액침전법을 이용하여 제조하였으며, 이 촉매를 이용하여 지름이 약 2 mm 이하로 촉매를 압출성형하는 방법을 연구하였다. 먼저 요소(urea)를 이용한 균일용액침전법으로 촉매를 제조하였다. 최적의 촉매 합성조건을 살펴보기 위해서, 반응 온도를 80, 85, 90, 95, $100^{\circ}C$로 변화 시키면서 제조된 촉매의 특성을 살펴보았다. 그리고 촉매의 적절한 니켈 양을 알아보기 위해서 니켈의 양을 30, 40, 50, 60, 70 wt%로 변화 시켰으며, 조촉매로 사용되는 MgO 양을 5, 10, 15, 20 wt%로 변화 시켜서 제조된 촉매의 특성을 살펴보았다. 물성을 비교하기 위해서, X-선 회절분석(XRD) 및 TPR, 물리화학흡착을 하였다. 그 결과 침전반응온도가 $80^{\circ}C$에서 촉매가 가장 좋은 물성을 보였으며, 우수한 개질성능을 보였다. 그리고 촉매 활성물질인 니켈의 함량은 50 wt% 정도가 가장 적절한 함량이었으며, MgO의 함량이 15 wt%일 때 가장 우수한 물성과 개질 성능을 보여주었다. 이 촉매들은 공침법으로 제조된 상용촉매와 비교하였을 때, 보다 우수한 물성과 개질성능 보였다. 그래서 이 촉매를 균일침전법을 이용하여 대량으로 제조한 다음 압출성형 방법을 이용하여 촉매를 원주형으로 제조하였다. 먼저 제조된 촉매는 별도의 분쇄작업(볼밀 혹은 제트밀)을 거치지 않아도 입자사이즈가 약 $4{\mu}m$ 수준이 나오도록 촉매 제조조건을 조절 하였다. 그리고 소량의 Methyl cellulose(MC) 바이더와 물만 사용하여 촉매를 혼합한 다음 스크류 압출기를 이용하여 촉매를 성형하였다. 이 촉매는 지름이 약 2 mm 이하로 제조할 수 있었으며, 기계적 강도는 타정기로 성형한 상용촉매보다 우수하였다. 그리고 촉매 성능 또한 상용촉매와 비교하였을 때, 우수한 성능 보였다. MCFC용 내부개질 촉매로 균일용액침전법을 사용한 촉매가 적합하다고 판단되며, 압출성형에도 적합하다고 판단되었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.226.1-226.1
• /
• 2010

본연구에서는 GTL(gas to liquids)공정의 합성가스 생산을 위해 수증기-이산화탄소 복합개질반응(Combined Steam and Carbon dioxide Reforming of Methane, CSCRM)을 수행하였다. CSCRM은 수증기와 이산화탄소의 공급비 조절을 통해 $H_2$/CO비를 2로 맞추기 용이한 장점을 지니고 있어 다른 단일 개질 반응과 달리 합성가스 생산 시 $H_2$/CO 비율을 조절하기 위한 부가적인 공정이 필요하지 않아 경제적인 공정이다. 일반적으로 사용되는 Ni개질촉매는 가격대비 우수한 성능을 보이지만 S/C비가 낮은 CSCRM의 경우 촉매표면의 탄소침적에 의한 비활성화가 야기되는 문제점이 있다. 따라서 본 연구에서는 산소저장능력과 산소전달능력이 우수한 $CeO_2$를 조촉매로 첨가하여 표면에 형성된 코크 제거가 용이하도록 하였다. Ni-Ce/$MgAl_2O_4$촉매는 동시함침법(co-impregnation)으로 제조하였으며, Ni의 함량을 10wt%로 고정한 상태에서 Ce의 함량을 조절하여 Ce/Ni 최적비를 찾고자 하였다. XRD, TPR, BET, $H_2$-Chemisorption과 같은 촉매의 특성분석을 통해 촉매의 비표면적, 환원특성과 Ni입자의 분산도 등을 확인하였다. Ce를 첨가함에 따라 Ce2.5wt%까지는 비표면적이 증가하다가 이후 점차 줄어드는 경향성을 보였다. 또한, $H_2$-Chemisorption 결과 역시 비표면적과 유사한 경향성을 보였는데, Ce5.0wt%까지 Ni 분산도가 증가 하다가 다시 감소하는 것을 확인할 수 있었다. 반응실험은 $H_2O:CO_2:CH_4:N_2$ = 0.8:0.4:1:1의 공급조건에서 수행하였으며, 질소와 수소 환원분위기로 $700^{\circ}C$에서 1시간 환원 후 $650^{\circ}C$에서 $550^{\circ}C$범위로 온도를 떨어뜨려가면서 반응을 수행하였다. Ce를 첨가함에 따라 $CH_4$ 전환율이 증가를 하다가 Ce2.5wt% 이후 감소하는 것을 확인할 수 있었다. 이러한 높은 촉매 활성은 Ce 첨가로 인해 환원특성이 좋아지고 Ni분산도가 증가하여 담체와 강한 상호작용(SMSI)을 형성함으로 탄소침적 저항성 강화에 기인한 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.130.2-130.2
• /
• 2010

2020년까지 대형 CCS (Carbon Capture and Storage) Demo Plant 시장 (100MW 이상) 이 형성될 전망이다. 발전 부문에서 대규모 CCS 실증 프로젝트는 총 44개이며 연소전(41%), 연소후(28%), 순산소(3%) 프로젝트가 계획되어 있다. 순산소 연소 기술은 실증진입단계, 연소후(USC) 기술은 상용화 추진단계, 연소전 (IGCC) 기술은 실증완료 이후 상용화 진입 단계이다. IGCC 발전의 석탄가스화 기술은 타 산업분야에 서 상용화 되어있어 기술신뢰성이 높다. IGCC 단위설비 기술 개발을 통한 성능개선 및 비용절감에 대한 잠재력을 가지고 있기 때문에 미래의 석탄발전기술로 고려되고 있다. IGCC 기술은 가장 상용화에 앞서있지만 아직까지 IGCC+CCS 대형 설비가 운전된 사례가 전 세계적으로 없으며 미국 EPRI 등에서 Feasibility Study 단계이다. 현재 국책과제로 수행중인 300MW급 태안 IGCC 플랜트를 대상으로 향후 CCS 설비를 적용했을 경우에 대해 기술 타당성 검증을 목적으로 IGCC+CCS 모델링을 수행하였다. 모델링은 스크러버 후단의 합성 가스를 대상으로 하였다. Water Gas Shift Reaction (WGSR) 공정 및 Selexol 공정을 구성하여 최종 단에서 수소 연료를 생산할 수 있도록 하였다. WGSR 공정은 Co/Mo 촉매반응기로 구성되었다. WGSR 모델링을 통하여 주입되는 스팀량 (1~2 mol-steam/mol-CO) 및 온도 변화 ($220-550^{\circ}C$)에 따른 CO가스의 전환율을 분석하여 경제적인 설계조건을 선정하였다. Selexol 공정은 $H_2S$ Absorber, $H_2S$ Stripper, $CO_2$ Absorber, $CO_2$ Flash Drum으로 구성된다. Selexol 공정의 $CO_2$와 $H_2S$ 선택도를 분석 하였으며 단위 설비별 설계 조건을 예측하였다. 모델링 결과 59kg/s의 합성가스($137^{\circ}C$, 41bar, 가스 조성은 $CO_2$ 1.2%, CO 57.2%, $H_2$ 23.2%, $H_2S$ 0.02%)가 WGSR Process를 통해 98% CO가 $CO_2$ 로 전환되었다. Selexol 공정을 통해 $H_2S$ 제거율은 99.9%, $CO_2$제거율은 96.4%이었고 14.9kg/s의 $H_2$(86.9%) 연료를 얻었다. 모델링 결과는 신뢰성 검증을 통해 IGCC+CCS 전체 플랜트의 성능예측과 Feasibility Study를 위한 자료로 활용될 예정이다.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.126-131
• /
• 2019

Real-scale fire tests were performed on animal-origin foods using a gas stove with no overheating prevention device. When the animal-origin foods were ignited, a large quantity of white smoke and steam was generated from them; however, when they became dry and began to carbonize, a dark smoke was generated. Even after the gas stove was overheated for more than 5400 s, mackerel, pollack, chicken, etc., did not ignite. However, pork, beef, and tuna caught fire after 2643 s, 2819 s, and 6492 s of heating, respectively. The flame patterns of animal-origin foods were in the forms of a mixed laminar flow and a turbulent flow, and a halo pattern was produced. A sand glass form of the flame pattern was generated when a kitchen hood was operated, but a triangular flame pattern was produced when the kitchen hood was not operated. When the tuna in the pot was overheated, it spontaneously ignited after 6492 s, with the surface temperature of the kitchen hood rapidly rising to 464.5 ℃. Moreover, the temperature at the back of the pot, which was 6 cm away from the outer surface of the upper part of the pot, was 869 ℃ after 6660 s because of the radiant heat. The flame formed a sand glass pattern on the kitchen wall. When the kitchen hood was not operated, or when the flame grew lower than the height of the ceiling, a triangular pattern was formed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.2
• /
• pp.248-256
• /
• 2003

Two experiments were conducted to determine the effects of expander processing and enzyme supplementation of wheat-based diets on growth performance and nutrient digestibility in finishing pigs. For Exp. 1, 60 finishing pigs (average initial BW of 49.5 kg) were fed meal, standard pellets and expanded pellets in a 70 d growth assay. From 49.5 to 79.0 kg, 79.0 to 111.8 kg, and overall (49.5 to 111.8 kg), ADG and ADFI were not affected by pelleting or standard vs expander conditioning (p>0.22). However, from 49.5 to 79.0 kg, pigs fed pellets have greater gain/feed than pigs fed mash (p<0.04), and pigs fed expanded pellets tended to have greater (p<0.10) gain/feed than pigs fed standard pellets. Overall (i.e. from 49.5 to 111.8 kg), gain/feed (p<0.02) and apparent fecal digestibilities of DM (p<0.001) and N (p<0.02) were improved by pelleting the diets. Also, expander processing further improved gain/feed (p<0.06) and digestibility of DM (p<0.04) compared to standard steam conditioning. Scores for keratinization (p<0.002) and ulceration (p<0.003) of the stomach were increased by pelleting, but the mean scores for the various treatments ranged only from 0.05 to 1.08 (i.e., low to mild keratosis and ulceration). For Exp. 2, 80 pigs (average initial BW of 54.1 kg) were fed mash and pellets (standard or expander) without and with xylanase. The enzyme was added to supply 4,000 units of xylanase activity/kg of diet. Adding xylanase to the mash diet improved gain/feed from 90.7 to 115.9 kg (p<0.04) of the growth assay and digestibility of DM (p<0.05) on d 39. However, in pelleted diets, adding the enzyme did not improve growth performance or digestibility of nutrients. Pelleting tended to increase scores for ulceration (p<0.06), and enzyme supplementation decreased stomach keratinization scores for pigs fed the standard pellets (p<0.01). However, as in Exp. 1, the mean scores for all treatment groups were quiet low (i.e., ranging from normal to mild). In conclusion, pelleting improved efficiency of growth, but additional benefits from expander conditioning were observed only in Exp. 1. Finally, xylanase tended to improve growth performance and nutrient digestibility, only in pigs fed mash diets but not in pigs fed pellets.

• Analytical Science and Technology
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2016

It is believed that traditional Korean medicines can be managed more scientifically through the development of logical criteria to verify their region of cultivation, and that this could contribute to the advancement of the traditional herbal medicine industry. This study attempted to determine such criteria for Sansuyu. The volatile compounds were obtained from 20 samples of domestic Corni fructus (Sansuyu) and 45 samples of Chinese Sansuyu by steam distillation. The metabolites were identified in the NIST Mass Spectral Library via the obtained gas chromatography/mass spectrometer (GC/MS) data of 53 training samples. Data binning at 0.2 min intervals was performed to normalize the number of variables used in the statistical analysis. Multivariate statistical analyses, such as principle component analysis (PCA), partial least squares-discriminant analysis (PLS-DA), and orthogonal partial least squares-discriminant analysis (OPLS-DA) were performed using the SIMCA-P software package. Significant variables with a variable importance in the projection (VIP) score higher than 1.0 were obtained from OPLS-DA, and variables that resulted in a p-value of less than 0.05 through one-way ANOVA were selected to verify the marker compounds. Finally, among the 11 variables extracted, 1-ethylbutyl-hydroperoxide (9.089 min), nonadecane (20.170 min), butylated hydroxytoluene (25.319 min), 5β,7βH,10α-eudesm-11-en-1α-ol (25.921 min), 7,9-bis(2-methyl-2-propanyl)-1-oxaspiro[4.5]deca-6,9-diene-2,8-dione (34.257 min), and 2-decyldodecyl-benzene (54.717 min) were selected as markers to indicate the origin of Sansuyu. The statistical model developed was suitable for the determination of the geographical origin of Sansuyu. The cultivation areas of four Korean and eight Chinese Sansuyu samples were predicted via the established OPLS-DA model, and it was confirmed that 11 of the 12 samples were accurately classified.