• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.174-178
• /
• 2001

An improved stationary frame-based digital current control technique for a permanent magnet (PM) synchronous motor is presented. Generally, the stationary frame current controller is known to provide the advantage of a simple implementation. However, there are some unavoidable limitations such as a steady-state error and a phase delay in the steady-state. On the other hand, in the synchronous frame current regulator, the regulated currents are dc quantities and a zero steady-state error can be obtained through the integral control. However, the need to transform the signals between the stationary and synchronous frames makes the implementation of a synchronous frame regulator complex. Although the PI controller in the stationary frame gives a steady-state error and a phase delay, the control performance can be greatly improved by employing the exact decoupling control inputs for the back EMF, resulting in an ideal steady-state control characteristics irrespective of an operating condition as in the synchronous PI decoupling controller. However, its steady-state response may be degraded due to the inexact cancellation inputs under the parameter variations. To improve the control performance in the stationary frame, the disturbance is estimated using the time delay control. The proposed scheme is implemented on a PM synchronous motor using DSP TMS320C31 and the effectiveness is verified through the comparative simulations and experiments.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.375-384
• /
• 1994

Depending upon the eye and head movement, the visual field is often classified into three categories; stationary field, eye field and head field. To investigate the effect of background condition on the size of stationary field, an experiment was conducted, in which the subject was instructed to search a target with distinct orientations. In each trial, a single target was presented on the rear-view screen projected by the two-field tachistoscope, with the visual angle subtended 4.3.deg. vertically and horizontally. Density, meridian and subject showed a significant effect on stationary field at .alpha.=0.01, where density was inversely proportional to the size of stationary field. The size of the stationary field on horizontal axis was larger than that on vertical axis, and that on right and below meridian also larger than on left and lower meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. The regression equation to predict stationary field on the given background condition was suggested. These results were expected to be used as a designing guideline when arranging displays and controls on panels such as automobile display panels, cockpits, etc. In addition, it can be inferred from the results that eye field and head field are also subjected to the influence of background condition.

• Journal of Power Electronics
• /
• 제1권2호
• /
• pp.88-98
• /
• 2001

An improved stationary frame-based digital current control technique for a permanent magnet(PM) synchronous motor is presented. Generally, the stationary frame current controller is known to provide the advantage of a simple implementation. However, there are some unavoidable limitations such as a steady-state error and a phase delay in the steady-state. On the other hand, in the synchronous frame current regulator the regulated currents are dc quantities and a zero steady-state error can be obtained through the integral control. However, the need to transform the signals between the stationary and synchronous frames makes the implementation of a synchronous frame regulator complex. Although the PI controller in the stationary frame gives a steady-state error and a phase delay, the control performance can be greatly improved by employing the exact decoupling control inputs for the back EMF., resulting in an ideal steady-state control characteristics irrespective of an operating condition as in the synchronous PI decoupling controller. However, its steady-state response may be degraded due to the inexact cancellation inputs under the parameter variations. To improve the control performance in the stationary frame, the disturbance is estimated using the time delay control. The proposed scheme is implemented on a PM synchronous motor using DSP TMS320C31 and the effectiveness is verified through the comparative simulations and experiments.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.141-153
• /
• 2012

In this study, we estimated probable precipitation amounts at the target year (2020, 2030, 2040) of 55 weather stations in Korea using the 24 hour annual maximum precipitation data from 1973 through 2009 which should be useful for management of agricultural reservoirs. Not only trend tests but also non-stationary tests were performed and non-stationary frequency analysis were conducted to all of 55 sites. Gumbel distribution was chosen and probability weighted moment method was used to estimate model parameters. The behavior of the mean of extreme precipitation data, scale parameter, and location parameter were analyzed. The probable precipitation amount at the target year was estimated by a non-stationary frequency analysis using the linear regression analysis for the mean of extreme precipitation data, scale parameter, and location parameter. Overall results demonstrated that the probable precipitation amounts using the non-stationary frequency analysis were overestimated. There were large increase of the probable precipitation amounts of middle part of Korea and decrease at several sites in Southern part. The non-stationary frequency analysis using a linear model should be applicable to relatively short projection periods.

• Wind and Structures
• /
• 제35권6호
• /
• pp.369-383
• /
• 2022

Wind tunnel experiment was carried out to study the cross-wind layer forces on a square cross-section building model using a synchronous multi-pressure sensing system. The stationarity of measured wind loadings are firstly examined, revealing the non-stationary feature of cross-wind forces. By converting the measured non-stationary wind forces into an energetically equivalent stationary process, the characteristics of local wind forces are studied, such as power spectrum density and spanwise coherence function. Mathematical models to describe properties of cross-wind forces at different layers are thus established. Then, a conditional simulation method, which is able to ex-tend pressure measurements starting from experimentally measured points, is proposed for the cross-wind loading. The method can reproduce the non-stationary cross-wind force by simulating a stationary process and the corresponding time varying amplitudes independently; in this way the non-stationary wind forces can finally be obtained by combining the two parts together. The feasibility and reliability of the proposed method is highlighted by an ex-ample of across wind loading simulation, based on the experimental results analyzed in the first part of the paper.

• 분석과학
• /
• 제35권4호
• /
• pp.181-188
• /
• 2022

This paper describes a comparative analysis of yeast cell viability at exponential and stationary growth phases using multiple conventional techniques and statistical tools. Overall, cellular responses to various viability assays were asynchronous. Results of optical density measurement and direct cell counting were asynchronous both at exponential and stationary phases. Proliferative capacity measurement using SP-SDS indicated that cells at the end of the stationary phase were proliferative as much as exponentially growing cells. Metabolic activity assays using two different dyes concluded that the inside of cells at stationary phase is slightly less reducing compared to that of exponentially growing cells, implying that the metabolic activity imperceptibly declined as cells were aged. These results will be helpful to understand the details of yeast cell viability at exponential and stationary growth phases.

• 대한전자공학회논문지
• /
• 제17권1호
• /
• pp.10-13
• /
• 1980

위상흔들림이 있는 펀스신호의 전력 스펙트럼을 구하였다. 여기서 pulse sequence는 통계적으로 independent stationary이며 위상흔들림은 stationary Gaussian의 확률특성을 갖는 것으로 가정되었다. Unipolar pulse 신호에 있어서, 위상흔들림이 증가할 때에 전력 스펙트럼의 discrete 부분은 감소하지만 continuous 부분은 증가하는 것으로 나타났다.

• Communications for Statistical Applications and Methods
• /
• 제22권1호
• /
• pp.81-93
• /
• 2015

Validity of the stationary bootstrap of Politis and Romano (1994) is proved for U-statistics under strong mixing. Weak and strong consistencies are established for the stationary bootstrap of U-statistics. The theory is applied to a symmetry test which is a U-statistic regarding a kernel density estimator. The theory enables the bootstrap confidence intervals of the means of the U-statistics. A Monte-Carlo experiment for bootstrap confidence intervals confirms the asymptotic theory.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.906-911
• /
• 1992

We deals with stationary layout control system of AGV. It is a intelligent contorl system to be wholly charged control PC a layout information and guided command and to be controlled a vehicle driving, steening, safety of natural functions of AGV. Fieldbus concentrator of stationary layout control system serves control command from control PC and status information of AGV. Telegram software monitors transmitted command and status information through IR (Infrared) modem. Epecially it is possible to easily network to use not an exclusive controller of AGV but

• 대한수학회지
• /
• 제37권3호
• /
• pp.463-471
• /
• 2000

A central limit theorem is obtained for stationary linear process Xt = aj$\varepsilon$t-j, where {$\varepsilon$t} a strictly stationary associated sequence with Et < and {aj} is a sequence of real numbers with <. A functional central limit theorem is also derived.