• 한국해양공학회지
• /
• 제10권4호
• /
• pp.67-74
• /
• 1996

The paper focuse on the effect of a crack subjects to collaspe behabiors of statically indeterminate beams under concentrated load. Through the experiment and calculation, it was revealed that the collaspe load of statically indeterminate beams is much higher than that of statically determinate beams. The cumulative AE event counts of statically determinate beams was less than that of statically indeterminate beams, and the center notch beams sas revealed less than that of the side notch beams.

• 수산해양기술연구
• /
• 제33권1호
• /
• pp.76-83
• /
• 1997

To investigate a safety margin in the design of structural plant, plastic collaspse behaviors of statically indeterminate beams were numerically as the preliminary study. Through the calculations, it was revealed that the ultimate strength of statically indeterminate beams is much higher than that of statically determinate beams.

• Structural Engineering and Mechanics
• /
• 제54권4호
• /
• pp.793-807
• /
• 2015

Constructing the influence lines of forces of statically indeterminate structures is a traditional issue in structural engineering and mechanics. However, the existing kinematic method for establishing these force influence lines is an indirect or mixed approach by combining the force method with the theorem of reciprocal displacements, which is yet inconsistent with the kinematic method for statically determinate structure. This paper proposes the direct kinematic method in conjunction with the load-displacement differential relation for exactly constructing influence lines of reaction and internal forces of indeterminate structures. Firstly, through applying the principle of virtual displacement, the formula for influence lines of reaction and internal forces of indeterminate structure via direct kinematic method is derived based on the released structure. Then, a computational approach with a clear concept and unified procedure as well as wide applicability based on the load-displacement differential relation of beam is suggested to achieve conveniently the closed-form expression of force influence lines, and exactly draw them. Finally, three representative examples for constructing force influence lines of statically indeterminate beams and frame illustrate the superiority of the proposed method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.67-72
• /
• 2001

The LBB behavior and the crack opening displacement after a crack penetrated wall thickness of statically indeterminate piping system were investigated in this study, compared with statically determinate piping system. The reduction of ultimate strength caused by a crack was relatively small in the statically indeterminate piping system. The statically indeterminate piping system has more safety margin for LBB behavior than the statically determinate piping system. The crack opening displacement could be evaluated by using the plastic rotation angle proposed to evaluate the crack opening displacement after crack penetration in pipe with a non-penetrating crack.

• 대한기계학회논문집A
• /
• 제34권6호
• /
• pp.725-730
• /
• 2010

부정정계 배관의 두께 관통 후 파단전누설 거동과 균열개구변위는 정정계 배관과 비교하여 연구 하였다. 부정정 배관은 균열 발생으로 인한 최대 강도의 감소가 비교적 적었다. 부정정 배관계의 파단 전누설 거동은 정정계 배관보다 더 안전 하였다. 균열개구변위는 미관통균열을 가지는 배관에서 균열 관통 후 평가하기 위하여 제안된 소성힌지를 사용하여 평가하였다.

• Tribology and Lubricants
• /
• 제10권1호
• /
• pp.62-68
• /
• 1994

The analysis of statically indeterminate bearing-shaft system was investigated. The moment loads and misalignment angles which were induced in the ball bearings were determined, and the influence of span length of this system on the moment loads and fatigue lives was identified. The sliding and spinning speeds between balls and raceways which affected the performance of ball bearing evaluated. The equation to estimate the cage speed of ball bearing under moment loads was proposed. This equation had been verified by the test results of measuring of cage speed, which was useful to the prediction of ball bearing under moment loads.

• Architectural research
• /
• 제3권1호
• /
• pp.71-80
• /
• 2001

It is quite difficult to calculate the collapse probability of a system such as statically indeterminate structure that has many possible modes or paths to complete failure and the problem has remained essentially unsolved. A structure is synthesized by several components or elements and its capacity to resist the given loads is a function of the capacity of the individual element. Thus it is reasonable to assess the probability of failure of the system based upon those of its elements. This paper proposes an efficient technique to directly assess the reliability of a complex structural system from the reliabilities of its components or elements. The theory for the calculation of the probability of a structural system is presented. The target requirements of the method and the fundamental assumptions governing the method are clearly stated. A portal frame and two trusses are selected to demonstrate the efficiency of the method by comparing the results obtained from the proposed method to those from the existing methods in the literature.

• Structural Engineering and Mechanics
• /
• 제3권5호
• /
• pp.475-495
• /
• 1995

In the past, physical models have been proposed, in compliance with the concept of the compressive-force path, for the realistic design of various statically determinate structural concrete members. The present work extends these models so as to encompass indeterminate RC structural forms. Pilot tests conducted on continuous beams and fixed-ended portal frames have revealed that designing such members to present-day concepts may lead to brittle types of failure. On the other hand, similar members designed on the basis of the proposed physical models attained very ductile failures. It appears that, unlike current design approaches, the compressive-force path concept is capable of identifying those areas where failure is most likely to be triggered, and ensures better load redistribution, thus improving ductility. The beneficial effect of proper detailing at the point of contraflexure in an indeterminate RC member is to be noted.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1993년도 제18회 학술대회 초록집
• /
• pp.70-76
• /
• 1993

From the analysis of shaft-bearing indeterminate system, moment and misalingment angle which was generated in bearing were determined. And the influence of span length between bearings on the fatigue life was established. The equation to estimate the cage rotational speed was proposed, and this equation was verified by the measuring of cage speed and shaft speed. And accoding to quasi-static analysis, the spinning speed of ball was determined.

• 대한치과교정학회지
• /
• 제26권3호
• /
• pp.281-290
• /
• 1996

Edgewise bracket에 continuous straight archwire를 장착 했을 때 각 bracket에 발생 하는 force system은 statically indeterminate system이기 때문에 임상적으로 측정이 어렵다. 이에 본 연구는 linear beam theory를 도입하여 full arch에 straight wire가 장착된 경우 geometry(a/b), 재질, 단면의 모양, interbracket distance에 관계없이 발생 가능한 모든 상태를 설명할 수 있는 식을 유도하고 일례의 분석을 통하여 다음과 같은 결과를 얻었다. 1. Bilateral fixed beam의 양끝에서 발생하는 force system을 알 수 있는 계산식을 얻었다. 2. 이를 이용하여 continuous straight archwire가 장착된 경우 각 치아에 발생하는 force system을 알 수 있다. 3. Continuous straight archwire장착시 영구변형의 발생여부와 발생위치를 예측 할 수 있다.