• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1191-1194
• /
• 2005

The effects of addition of $D_2$ to conventional gases on the discharge characteristics were investigated in this work with the aim of improving the voltage margin, the wall charge and the jitter. The addition of an extremely small gas-inlet amounts of $D_2$ increased the number of electrons which improves the $Xe^{\ast}$ density and $Xe_2^{\ast}$ density. As a result, the voltage margin, the jitter and the wall charge increased.

• Bulletin of the Korean Chemical Society
• /
• 제25권1호
• /
• pp.45-50
• /
• 2004

$Cu^{II}$-complexes of N-salicylideneaniline and its derivatives were not light sensitive in most solvents such as acetonitrile. A photo-decomposition occurred upon irradiation in halocarbon solvents such as $CHCl_3$. It has been suggested that such photoreactivity is attributed to the reactivity of charge-transfer to solvent (CTTS) excited state attained upon irradiation. A mechanism has been proposed to account for the results obtained. The complexes have been thermally analysed in nitrogen and static air using thermogravimetry (TG) and derivative thermogravimetry (DTG). The thermal degradation of the complexes proceeds in two or three stages. The kinetic parameters obtained from the Coats-Redfern and Horowitz-Metzger equations show the kinetic compensation effect.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권3호
• /
• pp.341-352
• /
• 2012

This paper presents a Processing Engine (PE) which is used in Low Density Parity Codec (LDPC) application with a novel charge-recovery logic called pseudo-NMOS boost logic (pNBL), to achieve high-speed and low power dissipation. pNBL is a high-overdriven and low area consuming charge recovery logic, which belongs to boost logic family. Proposed Processing Engine is used in LDPC circuit to reduce operating power dissipation and increase the processing speed. To demonstrate the performance of proposed PE, a test chip is designed and fabricated with 0.18 2m CMOS technology. Simulation results indicate that proposed PE with pNBL dissipates only 1 pJ/cycle when working at the frequency of 403 MHz, which is only 36% of PE with the conventional static CMOS gates. The measurement results show that the test chip can work as high as 609 MHz with the energy dissipation of 2.1 pJ/cycle.

• 전력전자학회논문지
• /
• 제5권5호
• /
• pp.435-442
• /
• 2000

리튬폴리머전지의 전기적인 특성을 평가하고 이것을 시스템 측면에서 고찰할 수 있는 이론적인 토대를 마련하기 위하여 본 논문에서는 전지의 전기적인 특성평가를 위한 전기적모델링 기법에 관하여 고찰하였다. 실제 제작된 리튬폴리머전지의 특성자료를 바탕으로 R-L-C 모델을 이용한 동적해석방식과 PSpice 모델을 이용한 정적해석방식을 통하여 리튬폴리머전지의 전기적 특성을 해석하였다. 각 모델의 풍/방전시의 전기적 특성을 고찰하고 충/방전조건에 따른 전지의 단자전압등 특성변수의 변화를 실제 제작된 리튬폴리머전지와 비친, 검토하여 그 타당성을 검증하였다.

• 대한화학회지
• /
• 제19권1호
• /
• pp.43-49
• /
• 1975

소량의 요오드 화합물이 윤활류에 함유될 때 금속표면사이의 마찰을 감소시키고 내마모성을 향상시키는데 이는 금속표면에 박층상구조의 이요오드화물이 형성되기 때문이라고 한다. 그러나 금속표면에서의 화학반응성, 마모와 극압실험 및 hot wire method에 의한 결과에 의하면 윤활기구는 이 요오드화물의 박층상 구조가 아니고 다른 기구에 의한 것임을 알았다. 유기 요오드화합물중에서 특히 N-iodopyridinium dichlorodate는 double charge transfer complex로써 다른 methyl iodide계의 화합물 보다 금속표면 사이의 마찰을 더욱 감소시키고 윤활기구는 interhalogen의 화학반응에 의한 것임을 알았다.

• ETRI Journal
• /
• 제26권6호
• /
• pp.513-519
• /
• 2004

This paper presents a low power 16-bit adiabatic reduced instruction set computer (RISC) microprocessor with efficient charge recovery logic (ECRL) registers. The processor consists of registers, a control block, a register file, a program counter, and an arithmetic and logical unit (ALU). Adiabatic circuits based on ECRL are designed using a $0.35{\mu}m$ CMOS technology. An adiabatic latch based on ECRL is proposed for signal interfaces for the first time, and an efficient four-phase supply clock generator is designed to provide power for the adiabatic processor. A static CMOS processor with the same architecture is designed to compare the energy consumption of adiabatic and non-adiabatic microprocessors. Simulation results show that the power consumption of the adiabatic microprocessor is about 1/3 compared to that of the static CMOS microprocessor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.571-576
• /
• 2006

A Color Discerning Device(CDD) is the equipment to use in Rice Processing Complex(RPC). By use a high-speed charge-coupled device camera, CDD can sorting discolored grain according to light and shade. The existing CDD's driving performance is not so good as overseas machine. Besides, transportation process causes a defect in the mechanism from impact or harmonic excitation or etc. This study is represented the problem of CDD through modal analysis and static analysis by using ANSYS workbench. To analysis the problem of driving condition, devide each part of CDD for performed modal analysis. The problem of driving condition and transportation process solved by carry out modal analysis and static analysis.

• 전기학회논문지P
• /
• 제62권1호
• /
• pp.30-35
• /
• 2013

Many function of railway signalling system which is in charge of most core function in a railway system are being operated by the software according to the development of computer technology. Accordingly, the source code testing to verify the safety of the railway signalling system software becomes to be more important, and related international standards highly recommend verifications on the source code also. For this reason, several related studies on vital source code verification were executed from several years ago in Korea. This paper performed tests through the application to railway signalling system being applied to the existing actual domestic railway sites through automated testing tools for coding rules of signalling system software and another signaling system software under development in Korea recently, and analyzed their results.

• 전자공학회논문지 IE
• /
• 제46권3호
• /
• pp.26-32
• /
• 2009

반도체 산업에서, 웨이퍼가 오염되는 불량률 원인의 70%는 웨이퍼 자체의 대전이다. 본 논문은 기존의 고전압을 이용한 코로나 방전식의 송풍형 정전기 제거장치를 개발하였다. 이 시스템은 방전 침 세정 기능을 자동으로 구현하여 균형하게 이온을 방출하도록 하였고, 이온 방출 상태를 감지하여 최적의 이온량을 조절하도록 하였으며, Zigbee 통신모듈을 이용하여 전 시스템을 모니터링하도록 하였다.

• 한국소음진동공학회논문집
• /
• 제21권2호
• /
• pp.112-119
• /
• 2011

This paper is concerned with the measurement of static and dynamic displacement by image processing(IP) and study for prediction method of velocity and acceleration. To measure the displacement visually, the measurement system consists of a telephoto zoom camera, CCD(charge coupled device) image device and a computer. The specific target on the white board is used to calculate the displacement of the structure. The captured image is then converted into a pixel-based data and then analyzed numerically. The limitation of the system depends on the image capturing speed and the pixel-size of image. In this paper, we developed for the displacement measurement using the image processing method. The proposed method enables us to measure the vibration displacement, velocity and acceleration directly without any contact. The current resolution for the displacement measurement can be seen from the results.