• Journal of Power Electronics
• /
• 제14권5호
• /
• pp.1028-1037
• /
• 2014

To optimize controller design and improve static and dynamic performances of three-phase four-leg inverter systems, a compound control method that combines state feedback and quasi-sliding mode variable structure control is proposed. The linear coordinate change matrix and the state variable feedback equations are derived based on the mathematical model of three-phase four-leg inverters. Based on system relative degrees, sliding surfaces and quasi-sliding mode controllers are designed for converted linear systems. This control method exhibits the advantages of both state feedback and sliding mode control. The proposed controllers provide flexible dynamic control response and excellent stable control performance with chattering suppression. The feasibility of the proposed strategy is verified by conducting simulations and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2120-2122
• /
• 2001

This paper describes a PID controller for an attraction type magnetic levitation system considering $H^{\infty}$ performance. PID controllers are a kind of fixed structure reduced order controllers. Using change of variables a reduced order control problem can be recast into a static output feedback control problem and can be solved efficiently by LMI(Linear Matrix Inequality) method. In this paper, cone complementarity method is adopted and the simulation shows good results.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.56-64
• /
• 2015

This study presents a model-based gain scheduling strategy for PI-based EGR controllers. The air-to-fuel ratio is used as an indirect measurement of the EGR rate. In order to cope with the nonlinearity and parameter varying characteristics of the EGR system, we proposed a static gain model of the EGR system using a new scheduling parameter. With the 810 steady-state measurements, the static gain model achieved 0.94 of R-squared value. Based on the static gain of the EGR system, the PI gains were robustly designed using quantitative feedback theory. Consequently, the gains of the PI controller are scheduled according to the static gain parameter of the EGR path in runtime. The proposed model-based gain scheduling strategy was validated through various operating conditions of engine experiments such as setpoint step responses and disturbance rejections.

• 전기의세계
• /
• 제30권1호
• /
• pp.55-63
• /
• 1981

This paper deals with the drive contrl of common elevator systems which may be realized with .mu.p-controlled selective-collective elevator systems. Incorporation on non-contact point circuits instead of electromagnetic relays in such an elevator system results in miniaturization of complicated hardware controllers currently being used. The drive control method is implemented by software programming. The important features are not only technical advantages such as higher performance, high speed data processing and more improved reliability, but also lower cost as compared with the conventional elevator drive control units equipped with a number of sequential electromagnetic relays and even more recent static IC logic circuits.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.395-400
• /
• 2015

Obtaining the parameters for PID controllers based on limit cycle information for the process in a relay controlled feedback loop has become an accepted practical procedure. If the form of the plant transfer function is known, exact expressions for the limit cycle frequency and amplitude can be derived so that their measurements, assumed error free, can be used to calculate the true parameter value. In the literature, parameter estimation for an assumed form of the plant transfer function has generally been considered for disturbance free cases, except a recently published work of the author. In this paper additional simulation results are reported on exact parameter estimation from relay autotuning under static load disturbances.

• 제어로봇시스템학회논문지
• /
• 제20권8호
• /
• pp.828-834
• /
• 2014

This paper presents a comparison among three types of approaches to an ARC (Active Roll Control) with an AARB(Active Anti-Roll Bar) for a vehicle system. Lateral acceleration and road profile are considered as disturbance. The ARC is designed with an LQ SOF (Linear Quadratic Static Output Feedback) control, $H_{\infty}$ control and SMC (Sliding Mode Control). These approaches are compared in terms of rollover prevention and ride comfort. For comparison, Bode plot analysis based on linear model and frequency response analysis based on CarSim simulation are performed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.2056-2062
• /
• 2009

Recent advances in computer technology have brought more dependence on software to train control systems. Hence, the safety assurance of the vital software running on the railway system is very critical task and yet, not many works have been done. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety, especially for the vital software running on board train controllers. In this paper, we have developed the static software testing tool for railway signaling, especially Fagan Inspection supporting tool. This static testing tool for railway signaling can be utilized at the assessment phase, and also usefully at the software development stage also. It is anticipated that it will be greatly helpful for the evaluation on the software for railway signalling system.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.240-249
• /
• 2018

Individual DC voltage balance problem is an inherent issue for cascaded H-bridge (CHB) based converter. When the CHB-based static synchronous compensator (STATCOM) is operating at zero current mode, the software-based individual DC voltage balancing control techniques may not work because of the infinitesimal output current. However, the different power losses of each cell would lead to the individual DC voltages unbalance. The uneven power losses on the local supplied cell-controllers (including the control circuit and drive circuit) would especially cause the divergence of individual DC voltages, due to their characteristic as constant power loads. To solve this problem, this paper proposes an adaptive voltage balancing module which is designed in the cell-controller board with small size and low cost circuits. It is controlled to make the power loss of the cell a constant resistance load, thus the DC voltages are balanced in zero current mode. Field test in a 10kV STATCOM confirms the performance of the proposed method.

• 전자공학회논문지SC
• /
• 제39권3호
• /
• pp.183-190
• /
• 2002

본 논문에서는 구조화된 어파인(affine) 파라미터 불확실성을 가지는 시변 선형시스템과 구조적 불확실성을 가지는 상태궤환 제어기에 대한 견실 비약성 H∞ 제어기 설계방법을 다루었다. 또한 견실 비약성 H∞ 제어기가 존재할 충분조건, 제어기 설계방법 및 비약성을 만족하는 제어기의 꽉찬 집합(compact set)을 제시하였다. 이 때 제시한 조건은 변수치환과 슈어 여수(Schur complement)정리를 통하여 선형행렬부등식 (LMI : Linear Matrix Inequality)의 계수가 꽉찬 집합 내의 파라미터의 함수로 정의되는 파라미터화 선형 행렬부등식(PLMls: parameterized Linear Matrix Inequalities)으로 표현되므로 분리 볼록개념 (separated convexity concepts)에 기초한 완화기법을 이용하여 유한개의 LMI로 변환하였다. 그리고 본론문에서 제시한 견실 비약성 H∞ 제어기가 제어기이득의 변화에도 불구하고 폐루프시스템의 점근적 안정성 (asymptotic stability)과 외란감쇠 성능을 보장함을 보였다.

• Smart Structures and Systems
• /
• 제22권5호
• /
• pp.547-560
• /
• 2018

This paper investigates the operation of the $H_{\infty}$ static output-feedback controller to reduce dynamic responses under seismic excitation on the five-story and benchmark 20 story building with parametric uncertainties. Linear matrix inequality (LMI) control theory is applied in this system and then to achieve the desired LMI formulations, some transformations of the LMI variables is used. Conversely uncertainties due to material properties, environmental loads such as earthquake and wind hazards make the uncertain system. This problem and its effects are studied in this research. Also to decrease the transition of large amount of data between sensors and controller, avoiding the disruption of whole control system and economy problems, the operation of the decentralized controllers is investigated in this paper. For this purpose the comparison between the performance of the centralized, fully decentralized and partial decentralized controllers in uncoupled and coupled cases is performed. Also, the effect of the changing the number of stories in substructures is considered. Based on the numerical results, the used control algorithm is very robust against the parametric uncertainties and structural responses are decreased considerably in all the control cases but partial decentralized controller in coupled form gets the closest results to the centralized case. The results indicate the high applicability of the used control algorithm in the tall shear buildings to reduce the structural responses and its robustness against the uncertainties.