• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.222-223
• /
• 2006

In this paper, we manufactured high flux LED module with Through Hole type. and we measured electrical, optical and thermal properties by driving type. LED module was composed with 8*8 arrangement form by using the glass epoxy PCB. Also, we measured the most suitable driving type with static voltage driving type and static current driving type. As a result, the LED Module of static voltage driving type showed high luminance characteristic than the static current driving type by suppling enough bias. However, the static current driving type showed more stable driving properties because of fast decreasing properties about brightness by increasing the surrounding temperature in the static voltage driving type. Also, due to Quantum confined Stark effect from piezoelectric field, the wavelength of bule peak shifted to long wavelength direction by increasing the surrounding temperature in the static voltage driving type.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.583-590
• /
• 2015

Automobile crash optimization is nonlinear dynamic response structural optimization that uses highly nonlinear crash analysis in the time domain. The equivalent static loads (ESLs) method has been proposed to solve such problems. The ESLs are the static load sets generating the same displacement field as that of nonlinear dynamic analysis. Linear static response structural optimization is employed with the ESLs as multiple loading conditions. Nonlinear dynamic analysis and linear static structural optimization are repeated until the convergence criteria are satisfied. Nonlinear dynamic crash analysis for frontal analysis may not have boundary conditions, but boundary conditions are required in linear static response optimization. This study proposes a method to use the inertia relief method to overcome the mismatch. An optimization problem is formulated for the design of an automobile frontal structure and solved by the proposed method.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제2권8호
• /
• pp.343-348
• /
• 2013

본 논문에서는 멀티미디어 서비스를 위한 파워-효율적인 고정 우선순위의 실시간 스케쥴링 알고리즘으로 다중 세분화 자원 예약 기반의 정적 전압 조절 알고리즘 (STATIC-MULTIRSV)을 제안한다. 다중 세분화 자원 예약은 전통적인 데드라인 기반의 자원 예약 보다 높은 연산 자원 사용률과 더 나은 태스크간 독립성을 제공하는 모델로서 [2]에서 소개된바 있다. 다중 세분화 모델을 기반으로 제안된 STATIC-MULTIRSV 알고리즘은 비디오 스트림들의 I-프레임들을 각각의 데드라인을 모두 만족하는 것을 보장하면서 파워 소비를 줄이도록 고안되었다. 제안된 알고리즘은 실시간 리눅스[6] 상에서 구현을 통해 실험적으로 기존의 방법에 비해 파워 소모를 최대 15%까지 줄였음을 보였다.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.971-980
• /
• 2018

Using the concept of quasi-static decomposition and using three-noded isoparametric locking-free element, this article presents a formulation of the finite element method for Timoshenko beam subjected to spatially different time-dependent motions at supports. To verify the validity of the formulation, three fixed-hinged beams excited by the real seismic motions are examined; one is a slender beam, another is a stocky one, and the other is an intermediate one. The numerical results of time histories of motions of the three beams are compared with corresponding analytical solutions. The internal loads such as bending moment and shearing force at a specific time are also compared with analytic solutions. These comparisons show good agreements. The comparisons between static components of the internal loads and the corresponding total internal loads show that the static components predominate in the stocky beam, whereas the dynamic components predominate in the slender one. Thus, the total internal loads of the stocky beam, which is governed by static components, can be predicted simply by static analysis. Careful numerical experiments indicate that the fundamental frequency of a beam can be used as a parameter identifying such a stocky beam.

• Wind and Structures
• /
• 제35권5호
• /
• pp.337-351
• /
• 2022

As central-slotted box decks usually have excellent flutter performance, studies on this type of deck mostly focus on the vortex-induced vibration (VIV) control. Yet with the increasing span lengths, cable-supported bridges may have critical wind speeds of wind-induced static instability lower than that of the flutter. This is especially likely for bridges with a central-slotted box deck. As a result, the overall aerodynamic performance of such a bridge will depend on its wind-induced static stability. Taking a 1400 m-main-span cable-stayed bridge as an example, this study investigates the influence of a series of deck shape parameters on both static and flutter instabilities. Some crucial shape parameters, like the height ratio of wind fairing and the angle of the inner-lower web, show opposite influences on the two kinds of instabilities. The aerodynamic shape optimization conducted for both static and flutter instabilities on the deck based on parameter-sensitivity studies raises the static critical wind speed by about 10%, and the overall critical wind speed by about 8%. Effective VIV countermeasures for this type of bridge deck have also been proposed.

• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.905-913
• /
• 2018

본 연구는 필라테스 동작 시 폼롤러의 적용과 움직임에 따른 몸통과 하지의 근활성도 차이를 알아보는 것이 목적이다. 피험자로 남자 8명을 선정하여 필라테스 네발자세, 교각자세, 코어컨트롤 동작을 매트위에서 정적동작, 폼롤러 위에서 정적동작, 폼롤러 위에서 동적동작으로 무선배정하여 1주 간격으로 수행하였다. 각 동작의 수행 시 척추세움근, 배곧은근, 배바깥빗근, 중간볼기근, 넙다리두갈래근과 넙다리곧은근의 근활성도를 측정하여 일원분산분석으로 분석하였다. 유의수준은 ${\alpha}=.05$로 설정하였다. 첫째, 네발기기 동작에서 폼롤러 동적동작에서는 배곧은근, 배바깥빗근, 중간볼기근, 넙다리두갈래근의 근활성도가 높게 나타났으며(p<.001)(p<.05), 폼롤러 정적동작에서는 넙다리곧은근의 근활성도가 높게 나타났다(p<.001). 둘째, 교각자세 동작에서 폼롤러 동적동작에서는 넙다리두갈래근의 근활성도가 높게 나타났다(p<.001). 셋째, 코어컨트롤 동작에서 폼롤러 동적 동작에서는 배곧은근, 척추세움근, 중간볼기근의 근활성도가 높게 나타났으며(p<.001)(p<.01), 정적 동작에서는 배바깥빗근의 근활성도가 높게 나타났다(p<.05). 필라테스 운동시 근활성도를 고려하여 방법과 난이도를 적용하면 더욱더 효과적일 것이라 사료된다.

• 제어로봇시스템학회논문지
• /
• 제21권6호
• /
• pp.560-564
• /
• 2015

This paper presents a design method of a static output feedback controller for continuous T-S fuzzy systems via parallel distributed compensation (PDC). The existence condition of a set of static output feedback gains is represented in terms of linear matrix inequalities (LMIs). The sufficient condition presented here does not need any transformation matrices and equality constraints and is less conservative than the previous results seen in [20].

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.561-564
• /
• 1998

This paper describes a performance degradation of static type input buffer due to the device degradation in menory devices using $0.8\mu\textrm{m}$ CMOS process. experimental results shows that the degradation of MOS device affects the Trip Point shift in static type input buffer. We have performed the spice simulation and calculated the Trip Point with model parameter and measurement data so that how much the Trip Point(VLT) variate.

• Structural Engineering and Mechanics
• /
• 제21권5호
• /
• pp.571-590
• /
• 2005

An 8 node assumed stress hexahedral element with rotational degrees of freedom is proposed for static and free vibration analyses. The element formulation is based directly on an 8-node element. This direct formulation requires fewer computations than a similar element that is derived from an internal 20-node element in which the midside degrees of freedom are eliminated by expressing them in terms of displacements and rotations at corner nodes. The formulation is based on Hellinger-Reissner variational principle. Numerical examples are presented to show the validity and efficiency of the present element for static and free vibration analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.523-525
• /
• 2005

This paper deals with a linear matrix inequality (LMI) approach to the design of a static output feedback controller that simultaneously stabilizes a finite collection of linear time-invariant plants. Simultaneous stabilization by static ouput feedback is represented in terms of LMIs with a rank condition. An iterative penalty method is proposed to solve the rank-constrained LMI problem. Numerical experiments show the effectiveness of the proposed algorithm.