• 제목/요약/키워드: State of Manufacture

검색결과 189건 처리시간 0.026초

다층 박막 스퍼터링 장비의 제어시스템에 관한 연구 (A Study on Control System of Multi Layer Sputtering Equipment)

  • 이선종;유흥렬;손영득
    • 전기전자학회논문지
    • /
    • 제22권2호
    • /
    • pp.302-308
    • /
    • 2018
  • 다층 박막 스퍼터링(Multi-Layer Sputtering)은 상이한 물질을 원하는 두께의 박막을 다층(Multi-Layer) 으로 형성함을 목적으로 한다. 다층 박막 증착 공정은 공정 시간이 비교적 많은 비중을 차지하는데, 그 주요 원인은 공정 시간에 비해 증착하고자하는 기판의 이동 시간과 챔버를 고진공 상태로 만드는 시간이 많이 소요되기 때문이다. 반도체나 디스플레이 산업은 하나의 챔버에서 단일 물질을 스퍼터링하고 기판이 다관절 로봇을 통해 다른 챔버로 이동하여 다른 물질을 스퍼터링하는 공정이 대부분인데, 이는 필연적으로 공정 설비 내에 여러 개의 챔버와 진공펌프, 다관절 로봇이 필요하다. 이러한 문제점을 해결하기 위해 본 논문에서는 단일 진공 챔버 내에서 서로 상이한 물질을 증착하는 다층박막 스퍼터링 장치에 대한 제어시스템을 제안하고 TFT 공정에서 적용한다. 제어시스템의 제작과 실험을 통해 유효성을 입증한다.

타이어 제조공장 가류공정의 온열환경 개선에 관한 연구 (Improvement of hot work environment in the curing processes of a tire manufacturing company)

  • 임정호;김태형
    • 한국산업보건학회지
    • /
    • 제21권1호
    • /
    • pp.1-10
    • /
    • 2011
  • Generally, the tire curing process is the process in which the sulfur is added and subsequently the tire is heated to give the tire elasticity. In this process, all kinds of the chemicals in the tire are emitted with a lot of heat. The chemical fume and heat aggravate the work environment. To solve this problem, 92 local exhaust ventilators and 8 gravity ventilators were used, but not satisfactory yet. Preliminary survey showed that the temperatures in the process were very high: 30.3, 32.9 and $37.2^{\circ}C$ at 2, 4 and 6m above the ground level, respectively in the winter (outside temperature was $2^{\circ}C$). It can be imagined that the process is severely hot in the summer time. The higher temperature distribution in the higher space tells us that the hot plume could not be removed with the existing ventilation systems. Therefore, in this study, some alternative ventilation systems were designed. The partitions were used to contain the hot plume to increase the capture efficiency. The gravity ventilators were newly designed to improve the extraction efficiency of hot fume. To satisfy the balance of pressure in the curing process, some supply air system was introduced by renewing the existing air conditioning system. Many alternative solutions were evaluated by using computational fluid dynamics modelling. The best and applicable solution was selected and the existing ventilation system was modified. After implementing the new ventilation system, the hot environment was much improved. The temperature reduction in the curing process was about $6.4^{\circ}C$.

ICP Source를 이용한 저온 증착 a-SiNx:H 특성 평가 (Low Temperature Deposition a-SiNx:H Using ICP Source)

  • 강성칠;이동혁;소현욱;장진녕;홍문표;권광호
    • 한국전기전자재료학회논문지
    • /
    • 제24권7호
    • /
    • pp.532-536
    • /
    • 2011
  • The silicon nitride films were prepared by chemical vapor deposition using inductively coupled plasma. During the deposition, the substrate was heated at $150^{\circ}C$ and power 1,000 W. To evolution low temperature manufacture, we have studied the role of source gases, $SiH_4$, $NH_3$, $N_2$, and $H_2$, to produce Si-N and N-H bond in a-SiNx:H film growth. $SiH_4$, $NH_3$, and $N_2$ flow rate fixed at 100, 10, and 10 sccm, $H_2$ flow rate varied from 0 to 10 sccm by small scale. To get the electrical characteristics, we makes MIM structure, and analysis surface bonding state. Experimental data show that Si-N and N-H bond is increased and hence electrical characteristics is showed 3 MV/cm breakdown-voltage, and leakage-current $10^{-7}\;A/cm^2$.

3D캐릭터콘텐츠제작을 위한 표정에 관한 연구 (A Study on Facial expressions for the developing 3D-Character Contents)

  • 윤봉식;김영순
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2004년도 춘계 종합학술대회 논문집
    • /
    • pp.478-484
    • /
    • 2004
  • 이 연구는 비언어적 감성기호인 인간의 표정에 관한 것으로 3D캐릭터콘텐츠제작을 위한 기반 연구로 진행되었다. 인간의 감정과 표현에는 일종의 연계성이 있으며 인간의 표정에 나타나는 감성기호에는 일정한 패턴의 체계가 존재한다. 인간의 풍부하고 복잡 미묘한 감성은 감정이라는 형태로 표출되어지고, 복합적이고 세세한 감정의 형태를 모두 통제하는 것은 불가능하리라 사료되나, 감정의 영역에 대한 적정한 일체화 행위를 통하여 각 감정 영역별 흐름을 찾을 수 있을 것으로 기대된다. 표정 이외의 인간의 다른 행동들 역시 이처럼 특징적인 형태, 유사성 등이 존재하나 본 연구에서는 인간의 표정에 제한하여 연구를 실시하였고, 연구를 통하여 보다 편리한 표정제작에 도움이 될 수 있는 감정의 표출 형태 중 표정의 범주화를 실시코자 한다.

  • PDF

Development of underwater 3D shape measurement system with improved radiation tolerance

  • Kim, Taewon;Choi, Youngsoo;Ko, Yun-ho
    • Nuclear Engineering and Technology
    • /
    • 제53권4호
    • /
    • pp.1189-1198
    • /
    • 2021
  • When performing remote tasks using robots in nuclear power plants, a 3D shape measurement system is advantageous in improving the efficiency of remote operations by easily identifying the current state of the target object for example, size, shape, and distance information. Nuclear power plants have high-radiation and underwater environments therefore the electronic parts that comprise 3D shape measurement systems are prone to degradation and thus cannot be used for a long period of time. Also, given the refraction caused by a medium change in the underwater environment, optical design constraints and calibration methods for them are required. The present study proposed a method for developing an underwater 3D shape measurement system with improved radiation tolerance, which is composed of commercial electric parts and a stereo camera while being capable of easily and readily correcting underwater refraction. In an effort to improve its radiation tolerance, the number of parts that are exposed to a radiation environment was minimized to include only necessary components, such as a line beam laser, a motor to rotate the line beam laser, and a stereo camera. Given that a signal processing circuit and control circuit of the camera is susceptible to radiation, an image sensor and lens of the camera were separated from its main body to improve radiation tolerance. The prototype developed in the present study was made of commercial electric parts, and thus it was possible to improve the overall radiation tolerance at a relatively low cost. Also, it was easy to manufacture because there are few constraints for optical design.

DME 생산공정에서 메탄올을 이용한 이산화탄소 제거 공정 연구 (A Study for Carbon dioxide Removal Process Using Methanol Solvent in DME Manufacture Process)

  • 조두희;노재현;김동선;조정호
    • 한국산학기술학회논문지
    • /
    • 제14권3호
    • /
    • pp.1502-1511
    • /
    • 2013
  • 본 연구에서는 Dimethyl ether (DME) 생산 공정 중에 포함되어 있는 이산화탄소 제거를 위한 용매로써 메탄올 수용액을 사용하는 공정에 대한 전산모사를 수행하였다. 공정모사를 위하여 Aspen tech 사의 Aspen Plus release 7.3을 사용하였으며, 열역학 모델식으로는 PC-SAFT 모델식을 사용하였다. PC-SAFT 모델식에서 필요한 이성분계 상호작용 매개변수를 결정하기 위하여 실험 데이터를 수집하고 회귀분석을 통해 새롭게 결정하였으며, 결정한 매개변수의 정확성은 실험 데이타와의 비교를 통해 검증하였다. 한편, 이러한 모델식과 검증한 매개변수를 사용하여 공정을 모델링 하였으며 최적 순환유량과 운전압력 그리고 원료 주입단 등을 결정하여 공정 최적화를 수행하였다.

크롬 취급 사업장의 작업환경 및 근로자 폭로 실태에 관한 연구 (A Study of Working Environments and Workers Exposed to Chromium)

  • 유병철;손병철;전진호;손혜숙;한용수;이채언;정운
    • Journal of Preventive Medicine and Public Health
    • /
    • 제27권3호
    • /
    • pp.517-530
    • /
    • 1994
  • For the purpose of providing the basic data for health management of workers who are exposed to chromium and for improving the quality of working environment, the authors evaluated blood and urinary level of chromium, the occupational history. AST, ALT, Hb, Hct, nasal specular examinaton on 287 workers who have been dealed chromium compounds in 56 manufacturing Industries of five types, that is, 38 metal plating services(plating),4 manufacture of other fabricated metal products (fabricated metal product), 5 manufacturing of dyestuff(dyestuff), 6 dressing and dyeing of leather(leather), 3 others(manufacture of pottery and ceramic househod wares, motor vehicles, electronic valves and tubes and other electronic components) and also measured the level of chromium in air from February to October 1993. The results were as follows ; 1. The utilized type of chromium compounds was the hexavalent state in plating fabricated metal product dyestuff, leather and the trivalent state in .other, and atmosperic chromium concentration as geometric mean was $0.0138mg/m^3(0.001{\sim}0.068mg/m^3)$ in plating, $0.0115mg/m^3(0.006{\sim}0.015mg/m^3)$ in fabricated matal product, $0.068mg/m^3(0.002{\sim}0.019mg/m^3)$ in dyestuff, $0.0083mg/m^3(0.002{\sim}0.028mg/m^3)$ in leather $0.0039mg/m^3(0.003{\sim}0.005mg/m^3)$ in other by the type of industry and it exceeded TLV-TWA ($0.05mg/m^3$) in five (13.6%) of plating services. 2. The geometric mean of chromium in blood was $1.54{\mu}g/dl(0.10{\sim}3.62{\mu}g/dl)$ in Plantng, $0.94{\mu}g/dl(0.27{\sim}2.82{\mu}g/dl)$ in fabricated metal product, $0.51{\mu}g/dl(0.10{\sim}3.25{\mu}g/dl)$ in dyestuff, $0.87{\mu}g/dl(0.15{\sim}8.00{\mu}g/dl)$ in leather, $0.55{\mu}g/dl(0.20{\sim}2.28{\mu}g/dl)$ in other by the type of industry(p<0.001). 3. The geometric mean of chromium in urine was $14.47{\mu}g/l(6.90{\sim}28.00{\mu}g/l)$ in planting, $4.63{\mu}g/l(0.24{\sim}43.00{\mu}g/l)$ in fabricated metal product, $5.93{\mu}g/l(1.00{\sim}33.00{\mu}g/l)$ in dyestuff, $11.09{\mu}g/l(0.80{\sim}48.00{\mu}g/l)$ in leather, $12.41{\mu}g/l(10.10{\sim}41.00{\mu}g/l)$ in other by the type of industry(p<0.001). 4. As the result of nasal specular examination, twenty four cases (8.4%) of nasal septal perforation among 287 total subjects was observed, and there were 17 (9.7%) cases in plating, 4 csaes (14.3%) in dressing and dyeing of leather. In the comparison of chromium concentration in blood and urine between the perforated group and non-perforated group, the perforated group showed a significantly higher value as $1.883{\pm}3.055{\mu}g/dl\;and\;0.793{\pm}0.815{\mu}g/dl$(P<0.001), $21.31{\pm}34.610{\mu}g/L\;and\;9.304{\pm}11.079{\mu}g/L$ (P<0.001). 5. The mean concentration of chromium in blood, urine and the mean level of AST, ALT, Hb and Hct in exposure group were higher than those of control group(p<0.001).

  • PDF

밀의 도정 및 발효 균주에 따른 우리밀 메주의 품질특성 (Quality Characteristic of the Korean Wheat meju according to Milling Degree of Wheat and Fermenting Strains)

  • 이경란;고유진;김은정;설희경;김은자;김일훈;심기환;김영기;류충호
    • 한국식품저장유통학회지
    • /
    • 제19권6호
    • /
    • pp.858-865
    • /
    • 2012
  • 본 연구는 표준화된 밀 메주를 제조하기 위해 원료밀의 도정에 따른 수침 및 증숙조건과 품질특성을 조사하였다. 수침시간에 따른 2분도 밀, 5분도 밀, 통밀, 밀가루의 물리적 특성변화를 조사하기 위해 무게, 부피, 수분 함량, 수분 흡수량을 살펴 본 결과, 대부분의 밀에서 수침 4시간 이후에는 평형상태에 도달하였다. 원료밀 종류에 따른 증숙시간을 조사한 결과, 통밀을 제외한 밀원료의 증숙시간은 $100^{\circ}C$에서 10분이 적합하였다. 최적 수침 및 증숙조건으로, 가공한 2분도 밀과 5분도 밀을 각각 A. oryzae와 B. subtilis M1으로 발효하여 우리밀 메주를 제조한 후 일반 성분 및 효소역가를 비교한 결과, 황국균을 사용한 경우 발효 효율이 더 우수하게 나타났다. 또한 2분도 밀보다 5분도 밀에서 총당, 환원 당 및 ${\alpha}$-amylase 역가가 높게 나타나, 우수한 밀 메주의 제조를 위해 5분도 밀을 A. oryzae로 발효하는 것이 효율적이라 사료된다.

청조의 용포소고 (Ch'ing Dragon Robes)

  • 박춘순;김재임
    • 복식
    • /
    • 제50권3호
    • /
    • pp.59-72
    • /
    • 2000
  • Dragon robe was defined as a robe on which the principal design consisted of dragon. Dragon patterns have been used on princess robes during T'and Dynasty. In Sung, Dragon-figured robes seem to have an Imperial prerogative. Yuan took over the use of robes with dragons patterns as a definite institition. Ming tried to reject all Yuan innovations, the dragon robe was retained as an unofficial court costume. The Emperor's semiformal robes which at first had four dragon medallions, later had twelve along with the 12 Symbols(십이장문). As Ch'ing dragon robes were only intended fro semiformal use. The Later Ch'ing robes date from after 1719, when the Ch'ien-lung(건륭) introduced 12 Symbols on Ch'ing robes. The Ch'ien-lung laws were disobeyed, notably the ones that specified the number of claws on the dragons. THe Emperor's dragon robe, lung-p'ao, (용포) was described as bright yellow in color, having four slits and horsefoof cuffs. The basic pattern consisted of nin dragons, in addition it had 12 Symbols. The elaborate textile techniques reached their peak in Ch'ing Dynasty-with its Weaving and Dyeing Office in Peking, and this factories at Hangchow(항주), Soochow(소주), and Naking(남경) -helps to explain why the decay of the Ch'ing bureaucracy hastended the decline of dragon robes. In the Ch'ing Dynasty tow terms were used for dragon robe, depending on the number of claws on the dragons. Those with five-clawed dragons were called lung-p'ao, while those with four-clawed dragons were called mang-p'ao(망포). The Court felt compelled to take corrective meausres. It decreeed that Ninisters of State and other officials, who had been bestowed five-clawed lung dragons, must take out one claw. Finally, the sale of ranks and the attendant privilege of wearing dragon robes gradually increased during the 18 th century, reaching its height in the 19 th century, Finally, after the Taiping Rebellion, when the Imperial Treasury was depleted by the wholesale destruction of revenue-producing lands, the Chinese government came to depend on such sales as an important source of revenue and the practice became even more widespread. The ensuing mass production of dragon robes, and the necessity of conforming to the fairly rigid basic pattern established in 1759, resulted in marked deterioration of workmanship, and a comparative monotony of decoration. The patterns on the dragon robes slight changes continued to be made in the ways of representign them. The li shui (입수) portion at the base of the robe become inreasingly wider throughout the 19th century. The background became cluttered with symbols of good fortune, scattered among the clouds and waves. As a result of all this extraneous decoration, the dragons were so crowded that they had to shrink back into the small size that they had originally occupied in the medallons. Kuang-hsu(광저) was a long one, allowing time for the manufacture of numerous robes. Also, it would seem likely that Occidental museums and collections would have a considerable number of his robes, in view of the widespread looting of his palaces during the Allied occupation of Peking in 1900, and the frequent sales of Late Ch'ing imperial textiles by destitute Manchu courtiers in the '20's.

  • PDF

LCD 제조공정 클린룸의 화재시 CFD를 이용한 제연성능 개선대책에 관한 연구 (A Study on Measures to Improve Smoke Control Performance in Case of Fire in a Clean room as an LCD Manufacturing Process)

  • 손봉세;장찬희
    • 한국화재소방학회논문지
    • /
    • 제26권5호
    • /
    • pp.41-47
    • /
    • 2012
  • 첨단산업기술인 반도체, LCD 등 제조의 핵심공정인 클린룸은 생산제품의 성능 및 품질에 절대적인 영향을 미치는 가장 중요한 공정이다. 그러나 국내는 방화공학적인 측면에서 과학적이고 종합안전대책에 대한 체계적인 연구가 제대로 이루어지지 않고 있다. 본 연구는 LCD 제조공정 클린룸에 설치하는 제연시스템의 성능 및 문제점을 파악하여 이에 대한 개선방안을 도출하기 위하여 여러 시나리오를 고려한 화재시뮬레이션과 피난시뮬레이션을 통하여 분석하였다. LCD 제조공정의 클린룸 화재 및 연기확산에 대하여 분석한 결과 화재시 공조기의 연동정지는 반드시 필요하며 연기의 부력을 고려하여 FAB 상부에 배연을 할 수 있도록 하여야 한다. 또한 대규모 클린룸의 경우 화재특성상 스프링클러헤드의 집열 성능이 떨어지므로, 조기반응형 헤드의 설치 및 작동시간을 빠르게 하기 위한 보조장치를 설치하여야 한다. 특히, 대공간 클린룸은 자동화 공정으로 거주밀도가 낮지만, 복잡한 생산장비의 배치와 방진복을 착용하고 근무해야하는 환경특성 때문에 화재시 피난안전성능 확보가 어렵기 때문에 공정 내 위험요소의 철저한 관리 및 주기적인 교육과 훈련이 필요하며, 방재선진국의 기준에 준하는 수준의 국내 관련기술 기준을 정립할 필요가 있다.