• Journal of the Korea Institute of Building Construction
• /
• v.2 no.4
• /
• pp.169-176
• /
• 2002

To study of binder and fine aggregate a lot of replacement fly-ash concrete, initial characteristics, standard environment of curing temperature $20^{\circ}C$, hot-weather environment, cold weather environment of curing temperature $5^{\circ}C$. Flash concrete tested slump, air contest, setting and Hardening concrete valuated setting period of form, day of age 3, 7, 28 compression strength in sealing curing. Underwater curing specimen compression strength of age 3. 7, 28day used strength change accordingly fly-ash concrete curing temperature. Purpose of study is consultation materials in field that variety of fly-ash replacement concrete mix proportion comparison and valuation. (1) Setting test result, fly-ash ratio of replacement higher delay totting time. Same volume of fly-ash ratio of replacement is lower fly-ash ratio of replacement fine aggregate delay setting time. Setting test in curing temperature $35^{\circ}C$ over twice fast setting in curing temperature $20^{\circ}C$ and all specimen setting delay in curing temperature $5^{\circ}C$. F40 specimen end of setting about 30 time. (2) Experiment result age 28day compression strength more fisher plan concrete then standard environment in curing temperature $20^{\circ}C$, cold weather environment in curing temperature $5^{\circ}C$, most strength F43 is hot-weather environment in curing temperature $35^{\circ}C$ replacement binder 25%, fine aggregate 15%. (3) Hot-weather environment replacement a mount of fly-ash is a same of plan concrete setting period of form. Age 28day compression strength replacement a mount of fly-ash more hot-weather concrete then plan concrete.

• Journal of architectural history
• /
• v.21 no.5
• /
• pp.19-32
• /
• 2012

The purpose of this paper is a study on the dome plan of S. M. del Fiore Church of F. Brunelleschi. The results of study are as follows: 1. The planning of floor, elevation and cross section plan of S. M. del Fiore church is basically planned by each other correlation. In particular, the octangular form of geometrical standard which is formed with altar as the center at the crossing part is important component elements which is decided by not only the dome, but form and size of the drum and floor plan form of the lantern 2. The dome which has been planned by F. Brunelleshi has completed the new dome, preserving gothic thought intended by the church plan after study on architecture of ancient Rome with Pantheon. And the dome which is a main space of church through all aspects of plan, structure, function and construction about the dome is a opportunity in the beginning of Renaissance architecture which is a new epoch and a turning point of architecture on various point of view. 3. The dome which is constructed by F. Brunelleshi has been planned through the innovative solution by the refusal of traditional semicircle form dome, centering use and creation double-shell structure form for the first time in history. And the construction of dome has been solved with the invention of various construction equipments and machineries, the stone rib planned for connection and reinforcement about shells of the octangular form, the support method for reduction the gravity of bricklayers work and the brick work of nock-patterned shape which is masonry construction method of the architecture of ancient Rome.

• Journal of Agricultural Extension & Community Development
• /
• v.18 no.4
• /
• pp.825-860
• /
• 2011

For the first time basic settlement area development plan was established in 2010, in order to promote cooperative coexisting development among regions, as time that regional competitiveness determines national competitiveness started. Basic settlement area development plan is composed of 7 sectors and 24 general subsidy projects. It was judged that experience and tourism business as the center is required to be analyzed, which may have effect on activation of farm village, fishing village and mountain village, and inflow of city people, in agriculture, forestry and fishery sector in order that added value of agriculture and fishery is increased, and tangible and intangible resources are applied, and pure agriculture, forestry and fishery is developed. And currently farm village, mountain village and fishing village of our country faces desperate crisis situation that they cannot help groping for substitutive to create new revenue model, and agriculture and fishery of primary industry has limit of increasing income of farmer and fisherman. Agriculture, forestry and fishery experience and tourism business was classified by types, and then standard of 12 categories and 48 sections was prepared, for searching method to supplement and develop it. Trend of experience and tourism business was understood, and problem was found, and then it may be used as indicator material to carry out creative and differentiated business plan establishment and business operation, and may be opportunity to reject overlapped business among regions, and to promote balanced regional development.

• Industrial Engineering and Management Systems
• /
• v.15 no.3
• /
• pp.231-238
• /
• 2016

Traditional acceptance sampling plans have focused on the proportion of nonconforming items as an attribute criterion for quality. In today's modern quality management under high quality production environments, the reduction of the deviation from a target value in a quality characteristic has become the most important purpose. In consequence, various inspection plans for the purpose of reducing the deviation from the target value in the quality characteristic have been investigated. In this case, a concept of the quality loss evaluated by the deviation from the target value has been accepted as the variable evaluation criterion of quality. Further, some quality measures based on the quality loss have been devised; e.g. the process loss and the process capability index. Then, as one of inspection plans based on the quality loss, the rigorous design procedure for the variable sampling plan having desired operating characteristics (VS-OC plan) indexed by the quality loss has been proposed by Yen and Chang in 2009. By the way, since the estimator of the quality loss obeys the non-central chi-square distribution, the rigorous design procedure for the VS-OC plan indexed by the quality loss is complicated. In particular, the rigorous design procedure for the VS-OC plan requires a large number of the repetitive and complicated numerical calculation about the non-central chi-square distribution. On the other hand, an approximate design procedure for the VS-OC plan has been proposed before the proposal of the above rigorous design procedure. The approximate design procedure for the VS-OC plan has been constructed by combining Patnaik approximation relating the non-central chi-square distribution to the central chi-square distribution and Wilson-Hilferty approximation relating the central chi-square distribution to the standard normal distribution. Then, the approximate design procedure has been devised as a convenient procedure without complicated and repetitive numerical calculations. In this study, through some comparisons between the rigorous and approximate design procedures, the applicability of the approximate design procedure has been confirmed.

• Journal of the Society of Disaster Information
• /
• v.9 no.1
• /
• pp.50-55
• /
• 2013

Self-Prevention Plan Review Report and Review Standards Process Safety Management(PSM), Safety Management System(SMS), including the contents of the safety management system audit standards, notices and guidelines on the screening form and were analyzed. Were expected through the interview and screening personnel in the screening process to identify problems prior research so that it can be reflected in the. Also divided into methods such as document review and on-site implementation status of the review written Emergency Preparedness Plan depending on the item proposed. Toxic Chemicals Control Act(TCCA) Self-Prevention Plan Review Regulations. However, the substantial approval process, and do not enable the system performance lacked Self-Prevention Plan Review. Review half configuration to enhance the professionalism and efficiency of the work of this research was performed.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.3
• /
• pp.75-83
• /
• 2019

Purpose: There are no clear criteria for slip performance in the BF certification process, so the evaluator relies on subjective judgments depending on the field situation. Physical criteria for determining the slip performance of various floor finishes are not clear. C.S.R., the only criterion currently being used to check slip performance, may raise questions about its coverage, feasibility and reliability. Method: For an analysis of domestic standards and status, KS L 1001, KS M 3510, and KS F 2375. External standards are analyzed for ADA Standard, ANSI Standard, and BS EN Standard. Analyze the test methods and evaluation criteria of O-Y-PSM, BPT, and the dynamic slip resistance test used in these criteria. It also presents an improvement plan for the rational presentation of standards. Results: To date, various kinds of test methods and measuring devices of the slip resistance coefficient have been developed, but there are not many ways to trust useful results related to user safety. Reliability and thoroughly verified test methods and criteria should be used to assess the slip performance of the floor. In order to improve the standard for the evaluation of slip performance in Korea, the existing standard should first be raised to the same level as the overseas standard, and the application of the discriminatory standard should be applied considering the characteristics and usage patterns of each space. Implication: Currently, Korean standards propose various test methods, but the proper use of test methods, scope and assessment criteria are not established, so improvement of the comprehensive standard is necessary.

• Journal of Food Hygiene and Safety
• /
• v.29 no.1
• /
• pp.16-20
• /
• 2014

The prevalence of Bacillus cereus was determined in salad and Kimbab obtained from commercial retailers. Among the 100 salad samples analyzed, 54 samples were negative for B. cereus, whereas the bacterial count was < 10 colony forming units (CFU)/g in 8 samples, < 100 CFU/g in 25 samples, < 1,000 CFU/g in 11 samples, and > 1,000 CFU/g in 2 samples. The mean (standard deviation) was 1.18 log CFU/g (${\pm}0.71$ log CFU/g). In Kimbab, B. cereus was isolated from 20 samples; the mean bacterial count was 1.01 log CFU/g (${\pm}0.71$ log CFU/g). On the basis of the monitoring data, a statistical sampling plan was determined with the NEW sampleplan program (ICMSF), which was used as an analytical tool. To identify the most suitable sampling plan, the microbial limits (m, M) and the maximum allowable number of sample units yielding unsatisfactory test results (c) were varied, but the number of samples units, n = 5, was fixed. Sampling plans showing an acceptable probability (Pa) over 0.95 were considered suitable. Two plans (A and B) were finally suggested. Parameters for plan A are n = 5, c = 0, m = 1,000, and M = 10,000 and for plan B are n = 5, c = 2, m = 100, and M = 1,000. Interestingly, the latter plan was identical to the microbial sampling plan used in New Zealand. Thus, it was concluded that the suggested plan can be used as a sampling plan that is in line with international standards.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.157-163
• /
• 2015

Recently, there has been much interest in the e-Navigation that applies a variety of digital devices to shipboard thanks to the high interest to maritime safety and the rapid development of ICT technologies. The e-Navigation proposes a new ICT paradigm in maritime information service and maritime safety. This study proposes the shore-based maritime information service platform that enables the converged services of various kinds of maritime data and the standard ENC based on IHO S-100. The proposed maritime information service platform enables the harmonized integration, presentation and web services of ENC, sensed data such as AIS, ocean weather and currents, and geospatial data. Also, the platform enables the mobile maritime information service through WebApp or App software operating in mobile devices of smart phone or web pad. Finally, the proposed platform accommodates the standard ENC of the existing S-57 and the new S-101, and the standard web services of WMS and WMTS of ISO 19100 and OGC.

• Journal of environmental and Sanitary engineering
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2009

The analyzed results of the heavy metal concentration of air and soil at the D iron-manufacturing company area were as follows; The concentration of $PM_{2.5}$ in the case area exceeded the air standard level in 3 seasons except summer. The $PM_{10}$ level was similar to the standard level, which was similar to the standard level, which was $50{\mu}g/m^3$. The Pb concentration of air in the case area was $0.13{\mu}g/m^3$, which was slightly higher than $0.11{\mu}g/m^3$ in the control area. The concentration of Cd and Cr were higher in the control area. The heavy metal (Pb) concentration of soil in the case area was $10.7{\mu}g/m^3$, which was higher than that of the control area. For these results, it is necessary for the D iron-manufacturing company area to consider a counter plan for dusts and are duction plan for the heavy metal (Pb).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.649-652
• /
• 2007

In the world each bureau tries an introduction of Mobile WiMAX frequency in the various band. Particularly, 2.5 GHz band is likely to be used as the future mobile telecommunication using as the IMT-2000 additional band which determined in WRC, and it comes into the spotlight as the band of the global radio broadband service including the Mobile WiMAX. Thus, the activity for including the Mobile WiMAX to the IMT-2000 technical standard is unfolded for the WiBro market development in the ITU-R WP8F conference, and the adoption or rejection will be finally determined in the ITU-R RA-07. Therefore, this paper tried to look for the plan for reaction according to the IMT-2000 standard acceptance of WiBro technology and the foreign usage plan of 2.5 GHZ band.