• 한국물환경학회지
• /
• 제28권3호
• /
• pp.426-435
• /
• 2012

The variation of stream flow is the one of the most important factors which influence on that of water quality in the unit watershed. The target water quality goal is established and permissible load is allotted in the base of the standard flow condition along with its water quality for the management of Total Maximum Daily Loads (TMDLs). A standard flow selected could cause problems in the load allotment if it was not properly arranged. This study reviewed the acquisition of water quality data, the self-variation and the retainability in water quality on the specific flow conditions. This study also proposed the median and the adjusted average flow condition out of general flow conditions as alternative standard flow conditions. It is considered that the alternatives can make the water quality data easily acquired and the water quality representativeness more enhanced on the standard flow conditions.

• 한국항공우주학회지
• /
• 제50권4호
• /
• pp.233-240
• /
• 2022

스마트무장은 종말 유도조종을 통해 정밀타격 임무를 수행하는 초소형 유도무기로 미래 전장환경의 신무기체계이다. 하지만 크기로 인한 구조적 제한으로 인해 압전구동 방식의 조종날개를 이용해 제어를 수행하기 때문에 기동력이 작아 유도범위가 제한적이다. 본 논문에서는 스마트무장의 효과도를 높이기 위한 비 표준조건 사격제원 산출 알고리즘을 제안한다. 제안된 알고리즘은 획득한 전장환경 정보를 이용해 표준조건에서의 사격제원을 보정해 비 표준조건의 사격제원을 산출한다. 다양한 조건에서의 수치 시뮬레이션을 통해 제안된 알고리즘의 성능을 검증하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.235-238
• /
• 2009

This research surveys actual conditions on lighting environments of the elderly's houses. from the results of survey on actual conditions of lighting in the elderly's houses, they don't meet standard of illumination suggested by KS A 3011, and, standard of ovarall illumination is satisfied in general, but illumination in a side of work or other activities is lower than the standard and it has failed to suggest standard that is considering user's characteristics, visual characteristics going with their ages and so forth, it is thought to urgently prepare standard which considers visual characteristics of the elderly and their ages.

• 경영과정보연구
• /
• 제14권
• /
• pp.117-132
• /
• 2004

The purpose of this study is to propose empirically the improvement measures of labor conditions of the contingent worker. Since early 1980s, the labour market in Korea has given rise to a rapid growth in contingent worker. Last year, the number has shot over 7 million mark, with the ratio standing above the 50%. This study analyses the improvement measures of labor conditions of the contingent worker. This study present five major improvement measures of labor conditions of the contingent worker. First, It's establish of the relations between organizational flexibility of the labour market and the contingent worker. Second, It's needs to realize wages level of the contingent worker. Third, the contingent worker convert standard workforce step by step. Fourth, it's make no discrimination of the between contingent worker and standard workforce. Fifthly, the government place restrictions of the contingent worker rates.

• 국제초고층학회논문집
• /
• 제11권4호
• /
• pp.331-346
• /
• 2022

Reproducing the horizontally homogeneous atmospheric boundary layer in computational wind engineering is essential for predicting the wind loads on structures. One of the important issues is to use fully developed inflow conditions, which will lead to the consistence problem between inflow condition and internal roughness. Thus, by analyzing the previous results of computational fluid dynamic modeling turbulent horizontally homogeneous atmospheric boundary layer, we modify the past hypotheses, detailly derive a new type of inflow condition for standard k-ε turbulence model. A group of remedial approaches including formulation for wall shear stress and fixing the values of turbulent kinetic energy and turbulent dissipation rate in first wall adjacent layer cells, are also derived to realize the consistence of inflow condition and internal roughness. By combing the approaches with four different sets of inflow conditions, the well-maintained atmospheric boundary layer flow verifies the feasibility and capability of the proposed inflow conditions and remedial approaches.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권6호
• /
• pp.603-610
• /
• 2018

This study examined the following: accuracy of the exposure conditions in the inverter device and three-phase device; output waveform over the exposure conditions; and average and standard deviation of the output waveform. After assessing whether the dose corresponding to the theoretical dose was presented, the following conclusions were obtained: 1. The accuracy of the tube voltage(kVp) and tube current(mA) exposure time(sec) was within the tolerable level prescribed in Korea's Safety Management Standards. In the error, Inverter device was large the tube voltage and exposure time, the three-phase device was large the tube current. 2. In terms of the output waveform of the exposure conditions and the average and standard deviation of the output waveform, the higher tube voltage and larger tube current resulted in greater standard deviation in pulsation. Moreover, the standard deviation of pulsation was shown to be greater in the inverter device than the three-phase device; there was also greater standard deviation in the inverter device considering the exposure time. 3. Regarding the exposure conditions over the output dose, all linearity showed the coefficient of variation which had an allowable limit of error within 0.05. Although the output dose ratio for the inverter device was 1.00~1.10 times no difference that of the three-phase device, there was almost no difference in dose ratio between the tube currents.

• 사회복지연구
• /
• 제40권3호
• /
• pp.243-265
• /
• 2009

본 연구는 한국복지패널 1차년도의 아동부가조사를 활용하여 소득빈곤(최저생계비)과 주거빈곤(최저주거기준)의 관계와 차이를 확인하고 나아가 최저기준미달 주거가 아동의 학업성취에 독립적인 영향을 미치는지 분석하였다. 연구 결과는 다음과 같다. 첫째, 소득빈곤과 주거빈곤은 통계적으로 유의미한 상관이 있으나 그 상관의 정도는 낮았다. 둘째, 주거만 빈곤한 층은 소득과 주거가 모두 빈곤한 층, 혹은 소득만 빈곤한 층과 가구특성에 차이가 있었다. 셋째, 소득 빈곤여부와 아동의 성별, 자존감, 학교생활적응, 가족구조, 모교육수준, 사교육비, 부모양육행동을 통제한 상태에서 최저기준 미달 주거는 아동의 학업성취에 부정적인 영향을 미치고 있었다. 본 연구 결과는 건강한 아동발달을 위해 주거에 대한 정부의 적극적인 개입이 필요함을 보여준다. 결론에서 주거정책에 대한 논의를 전개하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.845-850
• /
• 2003

Noise caused by water installations may lead to annoyance in adjacent rooms, for example in dwellings. hospitals and hotels. This part of standard describes a method of measurement allowing comparable results to be obtained in laboratory measurements. The test conditions described herein constitute the standard reference conditions essential for comparisons between laboratories.

• 한국건축시공학회지
• /
• 제8권1호
• /
• pp.37-42
• /
• 2008

As use of construction equipment has been increasing continuingly, the proportion of equipment expense to the total construction cost has become higher. However, there is a difference between the equipment expenses section in 'Poom-Sam' and practical data, because 'Poom-sam' does not consider non-working days due to weather conditions, legal holidays and management conditions. Therefore, 'Poom-Sam' does not present a reasonable standard for estimating construction equipment expenses. In this study, to estimate realistic construction equipment operating hours, firstly, construction equipment was classified according to work, and weather conditions, in which each work could not be executed, were established. Then, weather data on Seoul and Busan($2004{\sim}2006$) and legal holidays were analyzed to suggest annual standard operating hours. The annual standard operating hours of earthmoving & excavating, compaction, and drilling equipment was estimated to be 1,430 hours, and lifting equipment, concrete paving equipment, asphalt paving equipment, concrete equipment, and crushing & conveying equipment were estimated to be 2,124 hours, 1,156hours, 1,188hours, 1,688hours, and 2,152hours respectively.

• 한국군사과학기술학회지
• /
• 제24권3호
• /
• pp.302-308
• /
• 2021

Developers generally use test standards suggested by military standards such as MIL-STD-810G when performing vibration tests in the materiel development. However, according to MIL-STD-810G, it is recommended to test by tailoring the test standard suitable for the developed materiel, and it is specified to apply the suggested test standard only when there is difficulty in tailoring. In addition, the test standards presented by MIL-STD-810G are standards created under operating conditions different from the actual operating environment of each developed materiel, so the test according to this standard may be excessive or understated. Therefore, the developer must create an appropriate vibration test standard for the developed materiel as similar to the operating conditions as possible. In this paper, the procedure for creating the functional test standard and durability test standard suitable for the operating environment of the equipment to be mounted on the propeller aircraft under development is described, and the created standard is introduced.