• Journal of Urban Science
• /
• v.9 no.2
• /
• pp.21-30
• /
• 2020

The purpose of this study is to present a plan to distinguish 229 local governments nationwide by taking into account various characteristics such as population, employment, housing, and industry of the region for customized urban policies in the era of metropolitan areas. The National Statistical Portal (KOSIS) collected and standardized data related to population, housing, industry, and finance by region from 2000 to 2015 for the classification of regional types necessary for customized urban policies, and this was used to classify them into regional types that considered population, employment, housing and industry. The summary of the analysis results is as follows. First, as a result of the regional type classification, 10 key employment sites (4.4%), 5 employment centers (2.2%), 38 residential centers (16.6%), 20 growth areas (8.7%), 26 industrial cities (11.4%), 35 low-fertile farming and fishing villages (15.3%) and 95 stagnant areas (41.5%). Second, the Seoul metropolitan area is the most diverse type of metropolitan area in the country, with most of its core employment sites inside Seoul, residential centers inside and outside Seoul, and growth areas in the southeastern part of the country (Busan, Ulsan, and Gyeongsangnam-do) are mixed with industrial and growth areas centered around Busan, Ulsan and surrounding areas, while the rest of the local governments are found to be low-fertile farming villages or stagnant areas. Daegu (Daegu, Gyeongbuk) is an industrial city in Daegu, and the rest of the local governments are either low-density farming and fishing villages or stagnant areas. The Honam region (Gwangju and Jeolla) was found to be a low-mill farming and fishing village or stagnant area except for Gwangju, while the Chungcheong region (Daejeon, Sejong, and Chungcheong) was seen as a growth area with areas adjacent to Daejeon, Sejong, and the Seoul metropolitan area, and some industrial cities were included. Finally, the Gangwon area was mostly classified as low-density farming and fishing villages and stagnant areas.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.2
• /
• pp.143-150
• /
• 1992

Numerical simulation is made of a stably stratified salt-water solution due to lateral heating in an equilateral trapezoidal enclosure using boundary-fitted coordinate in grid generation. Results show four types of the global fluid pattern depending on the buoyancy ratio in the enclosure, i.e., unicell flow pattern for the low buoyancy ratio, layered flow pattern for the increasing buoyancy ratio, layered flow pattern with stagnant zone for the relatively high buoyancy ratio and stagnant flow pattern for the much higher buoyancy ratio.

• International Journal of Fluid Machinery and Systems
• /
• v.2 no.4
• /
• pp.295-302
• /
• 2009

The flow in the draft tube cone of Francis turbines operated at partial discharge is a complex hydrodynamic phenomenon where an incoming steady axisymmetric swirling flow evolves into a three-dimensional unsteady flow field with precessing helical vortex (also called vortex rope) and associated pressure fluctuations. The paper addresses the following fundamental question: is it possible to compute the circumferentially averaged flow field induced by the precessing vortex rope by using an axisymmetric turbulent swirling flow model? In other words, instead of averaging the measured or computed 3D velocity and pressure fields we would like to solve directly the circumferentially averaged governing equations. As a result, one could use a 2D axi-symmetric model instead of the full 3D flow simulation, with huge savings in both computing time and resources. In order to answer this question we first compute the axisymmetric turbulent swirling flow using available solvers by introducing a stagnant region model (SRM), essentially enforcing a unidirectional circumferentially averaged meridian flow as suggested by the experimental data. Numerical results obtained with both models are compared against measured axial and circumferential velocity profiles, as well as for the vortex rope location. Although the circumferentially averaged flow field cannot capture the unsteadiness of the 3D flow, it can be reliably used for further stability analysis, as well as for assessing and optimizing various techniques to stabilize the swirling flow. In particular, the methodology presented and validated in this paper is particularly useful in optimizing the blade design in order to reduce the stagnant region extent, thus mitigating the vortex rope and expending the operating range for Francis turbines.

• Journal of Korea Water Resources Association
• /
• v.32 no.2
• /
• pp.153-162
• /
• 1999

In this study, mixing and dilution characteristics of vertical multijet discharged by multiport diffuser into stagnant water are investigated. The results obtained from the experiment of multiport diffuser performed in the three dimensional flume are as follows. As far as merging process of multiport diffuser is concerned, merging starts at about z/l = 3 although merging length is dependent upon stability condition and thereafter lateral temperature distribution becomes gradually uniform which is typical distribution of plane jet. Analyses of experimental data for minimum dilution show that characteristics of minimum dilution are described based on three regions which are jet region where momentum is dominated, intermediate region, and plume region where buoyancy is dominated. Minimum dilution coefficient in plume region of multiport diffuser obtained in this study is 15% higher than that of plane diffuser. This is because individual jet of multiport diffuser entrains more ambient water before merging is occurred, and therefore dilution increases.

• Journal of Environmental Science International
• /
• v.24 no.6
• /
• pp.731-741
• /
• 2015

The objectives of study were to evaluate fish species compositions of trophic guilds and tolerance guilds and apply ecological fish assessment (EFA) models to Bekjae Weir, Keum-River Watershed. The EFA models were Stream Index of Biological Integrity (SIBI) used frequently for running water and Lentic Ecosystem Health Assessment (LEHA) used for assessments of stagnant water. The region of Bekjae Weir as a "four major river project" was originally a lotic ecosystem before the weir construction (2010, $B_{WC}$) but became more like lentic-lotic hybrid system after the construction (2011, $A_{WC}$). In the analysis of species composition and ecological bioindicator (fish), fish species with a preference of running water showed significant decreases (p < 0.05), whereas the species with a preference of stagnant water showed significant increases (p < 0.05). After the weir construction, relative abundances of tolerant species increased, and the proportion of insectivores decreased. This phenomenon indicated the changes of biotic compositions in the system by the weir construction. Applications of SIBI and LEHA models to the system showed that the two model values decreased at the same time after the weir construction ($A_{WC}$), and the region became more like lentic-lotic hybrid system, indicating the degradation of ecosystem health. The model values of SIBI were 19 and 16, respectively, in the BWC and AWC, and the health conditions were both "C-rank". In the mean time, the LEHA model analysis showed that the values was 28 in the BWC and 24 in the AWC, thus the health was turned to be "B-Rank" in the BWC and "C-Rank" in the AWC. indicating a degradation of ecological heath after the weir construction.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.12
• /
• pp.1078-1087
• /
• 2003

Kimchi refrigerator is a household electric appliance developed with the wholly domestic technology for maturing and keeping kimchi. However, the principle of keeping is not yet revealed obviously. This numerical study has been conducted to investigate the flow and heat transfer characteristics in a kimchi refrigerator. The effects of arrangement variation of a evaporation tube are examined. Also, the heat transfer characteristics through the insulation material are discussed in detail. The flow and temperature field was simulated using the commercial code of CFX-5.3. A natural convection flow is formed through about 5/6 region from the bottom within the keeping space and accordingly, the 90% region of kimchi containers satisfies the temperature requirement with 0$\pm$0.5$^{\circ}C$. The stagnant flow exists in the upper 1/6 region of the keeping space and accordingly, the stratified high temperature distributions appear in the upper region of kimchi containers. The upward shift of the start location of a evaporation tube improves the temperature concentration toward $0^{\circ}C$ but the pitch variation is of no effect. The heat fluxes on the insulation surfaces show two-dimensional distributions with being higher toward the center. Through the variation of insulation thickness, 3.5% saving of insulation material is obtained under the same heat transfer rate.

• The Journal of the Korea Contents Association
• /
• v.22 no.8
• /
• pp.367-376
• /
• 2022

In this study, changes in commercial areas in Yeongdo-gu urban regeneration region were analyzed in terms of regional revitalization. Urban decline can accelerate the decline of downtown commercial functions, and revitalization of stagnant areas can be evaluated as enhancing the vitality of commercial areas. To reach this objective, dynamic changes in the commercial area in urban regeneration region were confirmed through store density, industry diversity, and restaurant/cafe ratio. As a result of the study, it was found that the store density and industry diversity showed an increasing trend in Yeong-do urban regeneration region. Although it is difficult to find a substantial difference in the ratio of restaurant/cafe, it seems that Yeongseon 2-dong has undergone a relatively large commercial change. This research is significant in that it quantitatively evaluated and analyzed commercial changes in Yeongdo-gu urban regeneration region.

• Journal of the Korean Society of Combustion
• /
• v.22 no.1
• /
• pp.32-38
• /
• 2017

This paper shows the dynamics of the Burke-Schumann flame. To show flame dynamics, this paper measures the flame surface and heat release rate. The flame shape is divided into three types with forcing frequencies. When the forcing frequency is lower than 120 Hz, the upper region of flame is cut. The flame is stagnant with 220 to 280 Hz forcing frequencies. The rest conditions of forcing frequencies make the connected wave shape of flame. The heat release rate is expressed by the flame transfer function. The gain of the flame transfer function is similar with the oscillation magnitude of the flame area except for flame cutting conditions. The flame is cut because the fuel is not supplied to upper flame region.

• Journal of the Korean earth science society
• /
• v.43 no.1
• /
• pp.77-90
• /
• 2022

Despite the decreasing trend of anthropogenic emissions in East Asia in recent years, haze days still frequently occur in spring. Atmospheric blocking, which occurs frequently in the northeastern Pacific, leads to persistent changes in large-scale circulation and blocks westerly flow in the East Asian region. During March 2019, frequent warm and stagnant synoptic meteorological conditions over East Asia were accompanied 6-7 days later by the Alaskan atmospheric blocking. The Alaskan atmospheric blocking over the period of March 18-24, 2019 led to high particulate matter (PM₁₀) severe haze days exceeding a daily average of 50 ㎍ m^-3 over the period of March 25-28, 2019 in South Korea. Although the high-PM₁₀ severe haze days were caused by warm and stagnant meteorological conditions, the regional contribution of anthropogenic emissions in eastern China was calculated to be 30-40% using the Weather Research and Forecasting model coupled with Chemistry (WRF-Chem). The major regional contributions of PM₁₀ aerosols in the period of high-PM₁₀ severe haze days were as follows: nitrates, 20-25%; sulphates, 10-15%; ammonium, 5-10%; and other inorganics, 15-20%. Ammonium nitrate generated via gas-to-aerosol conversion in a warm and stagnant atmosphere largely contributed to the regional transport of PM₁₀ aerosols in the high-PM₁₀ severe haze days in South Korea.

• Journal of the Korean Society of Safety
• /
• v.10 no.1
• /
• pp.64-73
• /
• 1995

A preliminary study is performed in order to design an effective ventilation equipment for the control of possible pollutants in a workshop. To this end, the Patankar's SIMPLE methodology is used to investigate the flow characteristics of the contaminated thermal deflected jet which is encounted often in practical hood system. SIMPLE-Consistent algorithm is employed for the pressure-velocity coupling appeared in momentum equations. A two equation, k-$\varepsilon$ model is used for Reynolds stresses. The prediction data is compared well against the experimental results by Chang(1989). Considering the control of the wake due to its high turbulence together with the stagnant feature has been investigated in term of major parameters such as temperature and magnitude of the discharge velocity. Detailed discussions are made to reduce the size of the wake region which give rise to pollutant concentration stratification.