• 제목/요약/키워드: Staged combustion

검색결과 120건 처리시간 0.029초

15kW급 미분탄 연소로내에서 바이오매스 혼소율 변화에 따른 연소 특성 비교 (Combustion Charateristics of Biomass Blends on a 15KW Pulverized Coal furnaces)

  • 이상민;성연모;최민성;문철언;최경민;김덕줄
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.41-44
    • /
    • 2014
  • This study focused on the effect of the biomass blended ratio on air-staged pulverized coal furnace. The hybrid NOx reduction technology between fuel blending and air staging has been applied in an air-staged pulverized coal fired furnace. The results indicated that co-firing biomass with coal could reduce NOx emissions in an air-staged combustion. In addition, carbon burnout and flame temperature increased under the air-staged condition. A dominant synergistic effect on NOx reduction and carbon burnout was observed when biomass co-firing with coal was applied in air staged combustion.

  • PDF

다단연소를 이용한 저 NOx 버너의 연소특성에 관한 연구 (An Experimental Study on the Combustion Characteristics in Low Emission Multi-Staged Oil Burner)

  • 안국영;김한석;조은성
    • 연구논문집
    • /
    • 통권27호
    • /
    • pp.101-108
    • /
    • 1997
  • The characteristics of combustion and emissions in multi-staged oil burner have been experimentally studied for the various range of equivalence ratios, drop sizes and fuel formulations. Malvern system was used to measure droplet size of fuel. Light fuel oil and light fuel oil doped with pyridine($C_5H _5N$) were used to investigate the effects on fuel NOx emission. The emissions of NO and CO in exhaust gas and the flame temperatures were measured by the gas analyzer and thennocouples. NOx emissions were increased by increasing the excess air ratio (range:$lambda=1.1-1.4$) or decreasing the SMD of droplet in single-staged burner. In comparison with the single-staged burner, the emission of NOx in multi-staged burner was reduced by 50% but CO emission was slightly increased. It is found that multi-staged burner has a good capability in reducing thermal NOx resulting from the distributed heat release rate and lower flame temperature in fuel-rich and fuel-lean combustion zone. Moreover, the fuel NOx emission of the multi-staged burner is lower than that of single-staged burner, because multi-staged burner has fuel rich zone where fuel N is converted to $N_2$ more than NO. In 3-staged burner, the percentage of each stage combustion air have strong influence on emission characteristics. It is also found that NOx emission can be reduced by decreasing inner and outer air percentage or increasing middle air flow rate and CO emission is vice versa.

  • PDF

다단 연소 버너의 보일러 연소실에서의 연소 특성 (Combustion Characteristics of a Staged Burner for a Boiler)

  • 안준;김종진;강새별
    • 대한기계학회논문집B
    • /
    • 제33권10호
    • /
    • pp.767-772
    • /
    • 2009
  • The demand for a boiler with low NOx burner is increasing with the recent strict NOx regulation. Staged burner is a common low NOx burner to suppress the formation of thermal NOx by yielding local fuel rich and lean condition. The staged burner gives fire with bigger frontal area and length compared with a conventional burner, which changes heat transfer characteristics in the combustion chamber. The heat transfer and exhaust gas characteristics have been studied in the present study for a 0.5 t/h class furnace type boiler adopting the staged burner. A numerical simulation has been conducted to clarify the detailed physics inside the combustion chamber.

다단 연소 버너의 보일러 연소실에서의 연소 특성 (Combustion Characteristics of a Staged Burner for a Boiler)

  • 안준;김종진;강새별
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2008년도 춘계학술대회논문집
    • /
    • pp.555-558
    • /
    • 2008
  • The demand for a boiler with low NOx burner is increasing with the recent strict NOx regulation. Staged burner is a common low NOx burner to suppress the formation of thermal NOx by yielding local fuel rich and fuel lean condition. The staged burner gives fire with bigger frontal area and length compared with a conventional burner, which changes heat transfer characteristics in the combustion chamber. The heat transfer and exhaust gas characteristics has been studied in the present study for a 0.5 t/h class furnace type boiler adopting the staged burner. A numerical simulation has been conducted to clarify the detailed physics inside the combustion chamber.

  • PDF

다단연소사이클 엔진의 터보펌프 및 유공압 라인 특성 (Characteristics of Turbopump and Hydraulic lines of Staged Combustion Cycle Engine)

  • 이정호;전준수;황창환;우성필;이광진;유병일;한영민
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.94-98
    • /
    • 2017
  • 고성능 상단엔진 개발을 위한 9톤급 다단연소사이클 엔진의 선행연구가 진행 중에 있다. 다단연소사이클 엔진 기술검증시제(TDM0)를 제작을 완료하여, 나로우주센터 엔진 연소시험설비에서 예연소기와 터보펌프로 구성된 파워팩 연소시험과 주 연소기까지 장착된 엔진 연소시험을 차례로 수행하였다. 다단연소사이클 엔진 유공압 라인의 진공화 과정과 연소시험에서 나타난 터보펌프의 및 유공압 라인의 특성을 간략히 기술한다.

  • PDF

2단 동축형 Cyclone 연소기를 이용한 저공해 미분탄 연소특성 연구 (A Study on Low Emission Pulverized Coal Combustion in the 2 Staged Coaxial Cyclone Combustor)

  • 최상일;박주식;김성완;김호영
    • 한국연소학회지
    • /
    • 제4권1호
    • /
    • pp.67-83
    • /
    • 1999
  • The objective of this study is development of low emission pulverized coal combustor for reducing pollutant emission generated from coal combustion. Low emission combustion technology for reducing NOx and fly ash was investigated by using 2 stage coaxial cyclone combustor. Staged combustion was employed for NOx reduction and high temperature slagging combustion was also studied for fly ash removal in the combustor. The result of this study shows that the low emission combustion system can reduce the amount of atmospheric pollutions with improved boiler efficiency and performance.

  • PDF

미분탄 연소에서 NOx 저감을 위한 공기다단의 효과 (Effect of Air Staging on NOx Reduction in Pulverized Coal Combustion)

  • 장길홍;장인갑;선칠영;천무관;양관모
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.149-154
    • /
    • 1999
  • The influences of air staging on NOx emission and burnout of coal flames were investigated using 1MWth combustion test facility. The experiments showed that variation of overall excess air ratio led to a relatively higher NOx emission level for ${\lambda}=1.2.$ When air staging was applied to the combustion air, it was confirmed that a fuel rich primary combustion zone was established and unburned char was burened completely by mixing with the staged air supplied radially around the flame. The NOx emissions were redued by increasing the staged air flow rate, and staging air was suggested to be more than 40% of the total combustion air for the substantial NOx reduction.

  • PDF

다단연소사이클 엔진 시스템 기술검증시제 연소성능 평가 (Combustion Characteristics of Technology Demonstration Model for Staged Combustion Cycle Engine)

  • 임지혁;우성필;전준수;이정호;이광진;한영민
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.108-111
    • /
    • 2017
  • 정지궤도용 우주발사체에는 고성능 상단엔진이 필수적이며 높은 비추력을 가지는 다단연소사이클 엔진이 적합하다. 터보펌프, 예연소기, 연소기, 공급계 시스템으로 구성된 9톤급 다단연소사이클 엔진 시스템의 기술검증시제를 제작하여 나로우주센터 3단 엔진 연소시험설비에서 3초 지상연소시험을 수행하였다. 엔진 시스템의 시동, 점화, 연소 및 종료가 정상적으로 수행되었으며 주요 성능 변수를 평가하였다.

  • PDF

질소산화물과 관련한 환경기계기술 (Eco-machinery Engineering Technology for Reducing NOx Emission)

  • 안국영;김한석;차민석;이진욱
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.301-310
    • /
    • 2003
  • Eco-Machinery engineering technologies in KIMM for reducing NOx emission were introduced. Combustion technologies such as reburning and fuel staged or air staged combustion have been applied to reduce NOx emission in the field of boiler furnaces. Lean premixed combustion method have been studied in gas turbine combustor. Hybrid system with plasma and SCR being considered as prospective method of De-NOx has been developed. Also, low NOx technologies including common rail system, EGR and DPF in diesel engine have been investigated.

  • PDF

액체로켓엔진 통합 설계를 위한 에너지 발란스 프로그램 개발 (Development of Energy Balance Program for Staged-Combustion Cycle of Liquid Rocket Engine)

  • 이상복;노태성
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.93-97
    • /
    • 2010
  • 액체로켓엔진 단계식 연소 사이클에 대한 에너지 발란스 프로그램을 개발하였다. 엔진을 추력실, 터보펌프, 터빈, 예연소기, 공급계 부품 등으로 모듈화 하여 각 모듈 프로그램을 제어하는 방식을 사용하였다. 이를 통해 에너지, 질유량, 압력의 균형을 맞추었으며 대표적인 단계식 연소 사이클인 스페이스 셔틀 메인 엔진의 자료를 바탕으로 비교 검증하였다.

  • PDF