• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.66-68
• /
• 2014

Most commercial white LED lamps use blue chip coated with yellow emitting phosphor. The use of blue excitable red and green phosphors is expected to improve the CRI. Several phosphors, such as $SrGa_2S_4:Eu^{2+}$ and $(Sr,Ba)SiO_4:Eu^{2+}$, have been suggested in the past as green components. However, there are issues of the sensitivity and stability of such phosphors. Here, we describe gallium substituted $YAG:Ce^{3+}$ phosphor, as a green emitter. YAG structures are already accepted by the industry, for their stability and efficiency. LEDs with improved CRI could be fabricated by choosing $Y_3Al_4GaO_{12}:Ce^{3+}$ (green and yellow), and $SrS:Eu^{2+}$ (red) phosphors, along with blue chip. Also, the effect of a slight change in chip wavelength is studied, for two phosphor-coated w-LEDs. The reduction in particle size of the coated phosphors also gives improved w-LED characteristics.

• 전기의세계
• /
• 제38권10호
• /
• pp.13-22
• /
• 1989

본 연구에서는 EL에 사용되고 있는 분말형광체에 대한 물리적 제현상을 소개하고 아울러 본 연구실에서 연구해 온 ZnS : Mn, Zns : TbF$_{3}$, Zns : SmF$_{3}$, CaS : EuCl$_{3}$, SrS: CeCl$_{3}$ 형광체 및 박막EL 소자에 관한 실험과 내용을 바탕으로 형광체의 특성을 종합 분석하고 현상을 고찰, 검토하고자 한다.

• 분석과학
• /
• 제13권3호
• /
• pp.309-314
• /
• 2000

리튬 용융염($LiC+Li_2O$) 내에 미량으로 존재하는 핵분열생성물을 유도결합 플라스마 원자방출분광기(ICP-AES)를 이용하여 분석하였다. 분석대상 원소 중 감도가 가장 좋은 파장을 선택해 이들 파장에서 리튬 500, 1,000, 2,000 mg/L에 따른 분광학적 간섭 여부를 확인한 결과, 분석원소중 0.1 mg/L 이하의 Y, Nd, Sr, La, Eu의 방출세기는 리튬의 농도가 2,000 mg/L까지 증가시켜도 분광학적 간섭을 받지 않은 반면, Mo, Ba, Ru, Pd, Rh, Zr, Ce는 10% 에서 50% 이상 분광학적 간섭과 매트릭스에 의한 스펙트럼 방해가 나타났다. 리튬 매질로부터 미량 금속원소들을 군분리하기 위하여 모의 용융염 용액을 조제해 암모니아수를 가한 후 분리하고 다시 산처리하여 얻은 용액을 ICP-AES로 회수율을 측정하였다. 분석원소 중 Ru, Y, Rh, Zr, Nd, Ce, La, Eu의 회수율은 90% 이상인 반면 Mo, Ba, Pd, Sr는 낮은 회수율을 보여주었으며, 가해준 암모니아수 양이 증가할수록 회수율이 증가하는 경향을 보였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.187-195
• /
• 2018

$Sr_{0.92}Y_{0.08}Ti_{1-x}Ni_xO_{3-{\delta}}$ (SYTN) was investigated in the presence of $H_2S$ containing fuels to assess the feasibility of employing oxide materials as alternative anodes. Aliovalent substitution of $Ni^{2+}$ into $Ti^{4+}$ increased the ionic conductivity of perovskite, leading to improved electrochemical performance of the SYTN anode. The maximum power densities were 32.4 and $45.3mW/cm^2$ in $H_2$ at $900^{\circ}C$ for the SYT anode and the SYTN anode, respectively. However, the maximum power densities in 300 ppm of $H_2S$ decreased by 7% and by 46% in the SYT and the SYTN anodes, respectively. To enhance the sulfur tolerance and to improve the electrochemical properties, the surface of SYTN anode was modified with samarium doped ceria (SDC) using the sol-gel coating method. For the SDC-modified SYTN anode, the cell performance was mostly recovered in the pure $H_2$ condition after 500-ppm $H_2S$ exposure in contrast to the irreversible cell performance degradation exhibited in the unmodified SYTN anode.

• 한국축산식품학회지
• /
• 제38권6호
• /
• pp.1189-1195
• /
• 2018

This study developed an antimicrobial hydrogel to control Listeria monocytogenes in Yukhoe (Korean beef tartare). Four hydrogels (hydrogel 1: 5% alginate+1% chitosan+0.2% $CaCl_2$, hydrogel 2: 1% ${\kappa}$-carrageenan+1% chitosan, hydrogel 3: 2% ${\kappa}$-carrageenan+1% $CaCl_2$, and hydrogel 4: 2% ${\kappa}$-carrageenan+3% $CaCl_2$) were prepared. The hydrogels then absorbed 0.1% grapefruit seed extract (GSE) and 0.1% citrus extract (CE) for 30, 60, 120, and 240 min to be antimicrobial hydrogels. To select the most effective antimicrobial hydrogel, their swelling ratio (SR) and antilisterial activities were determined. The selected hydrogel ($2{\times}2cm$) was then placed on surface of beef (round; $3{\times}3cm$), where L. monocytogenes (ca. $10^6CFU/g$) were inoculated, and the cell counts were enumerated on PALCAM agar. Among the hydrogels, the SR of hydrogel 1 increased with absorbing time, but other hydrogels showed no significant changes. Antimicrobial hydrogel 1 showed higher (p<0.05) antilisterial activity than other antimicrobial hydrogels, especially for the one absorbed the antimicrobial for 120 min. Thus, the antimicrobial hydrogel 1 absorbed antimicrobials for 120 min was applied on raw beef at $4^{\circ}C$, and reduced (p<0.05) more than 90% of L. monocytogenes on raw beef. These results indicate that antimicrobial hydrogel 1 formulated with 0.1% GSE or 0.1% CE is appropriate to improve the safety of Yukhoe by reducing psychrotrophic L. monocytogenes cell counts on raw beef.

• 한국진공학회지
• /
• 제7권3호
• /
• pp.195-200
• /
• 1998

본 연구에서는 강유전체 박막의 게이트 산화물로 사용한 $Pt/SrBi_2Ta_2O_9(SBT)/CeO_2/Si(MFS)$와 Pt/SBT/Si(MFS) 구조의 결정 구조 및 전기적 성질 의 차이를 연구하였다. XRD 및 SEM 측정 결과 SBT/$CeO_2$/Si박막은 약5nm정도의 $SiO_2$층 이 형성되었고 비교적 평탄한 계면의 미세구조를 가지는 반면, SBT/Si는 각각 약6nm와 7nm정도의 $SiO_2$층과 비정질 중간상층이 형성되었음을 알 수 있다. 즉 CeO2 박막을 완충층 으로 사용함으로써 SBT박막과 Si기판의 상호 반응을 적절히 억제할 수 있음을 확인하였다. Pt/SBT/$CeO_2/Pt/SiO_2$/와 Pt/SBT/Pt/$SiO_2$/Si구조에서 Polarization-Electric field(P-E) 특 성을 비교해 본 결과 CeO2박막의 첨가에 따라 잔류분극값은 감소하였고 항전계값은 증가하 였다. MFIS구조에서 memory window값은 항전계값과 직접적 관련이 있으므로 이러한 항 전계값의 증가는 MFIS구조에서의 memory window값이 증가할 수 있음을 나타낸다. Pt-SBT(140nm)/$CeO_2$(25nm)/Si구조에서 Capacitance-Voltage(C-V) 측정 결과로부터 동작 전압 4-6V에서 memory wondows가 1-2V정도로 나타났다. SBT박막의 두께가 증가할수록 memory window값은 증가하였는데 memory wondows가 1-2V정도로 나타났다. SBT박막의 두께가 증가할수록 memory window값은 증가하였는데 이는 SBT박막에 걸리는 전압강하가 증가하기 때문인 것으로 생각되어진다. Pt/SBT/$CeO_2$/Si의 누설전류는 10-8A/cm2정도였고 Pt/SBT/Si 구조에서는 약10-6A/cm2정도로 약간 높은 값을 나타내었다.

• 센서학회지
• /
• 제24권2호
• /
• pp.96-100
• /
• 2015

In the present study, we developed a real-time radiation-monitoring sensor for an underwater radiation-monitoring system and evaluated its effectiveness using reference radiation sources. The monitoring sensor was designed and miniaturized using a silicon photomultiplier (SiPM) and a cerium-doped-gadolinium-aluminum-gallium-garnet (Ce:GAGG) scintillator, and an underwater wireless monitoring system was implemented by employing a remote Bluetooth communication module. An acrylic water tank and reference radiation sources ($^{137}Cs$, $^{90}Sr$) were used to evaluate the effectiveness of the monitoring sensor. The underwater monitoring sensor's detection response and efficiency for gamma rays and beta particles as well as the linearity of the response according to the gammaray intensity were verified through an evaluation. This evaluation is expected to contribute to the development of base technology for an underwater radiation-monitoring system.

• 한국세라믹학회지
• /
• 제56권2호
• /
• pp.197-204
• /
• 2019

An electrochemical oxygen permeating membrane (OPM) is fabricated using Zr_0.895Sc_0.095Ce_0.005Gd_0.005O_2-δ (ScCeGdZ) as the solid electrolyte and aLa_0.7Sr_0.3MnO₃-bScCeGdZ composite (LZab, electrode) as the electrode. The crystal phase of the electrode and the microstructure of the membrane is investigated with X-ray diffraction and scanning electron microscopy. The electrochemical resistance of the membrane is examined using 2-p ac impedance spectroscopy, and LZ55 shows the lowest electrode resistance among LZ82, LZ55 and LZ37. The oxygen permeation is studied with an oxygen permeation cell with a zirconia oxygen sensor. The oxygen flux of the OPM with LZ55 is nearly consistent with the theoretical value calculated from Faraday's Law below a critical current. However, it becomes saturated above the critical current due to the limit of the oxygen ionic conduction of the OPM. The OPM with LZ55 has a very high oxygen permeation flux of ~ 3.5 × 10^-6 mol/㎠s in I = 1.4 A/㎠.

• 방사성폐기물학회지
• /
• 제5권3호
• /
• pp.171-177
• /
• 2007

본 연구는 사용 후 핵연료의 금속전환 공정에서 발생되는 폐용융염을 고형화하는 방법으로 실리카 함유 무기물을 이용하여 폐용융염을 열적, 수화학적 안정한 화합물로 전환하는 방법을 제안하였다. 실리카 함유 무기물(SAP)은 일반적인 sol-gel process로 합성되었으며, $SiO_2,\;Al_2O_3$ 및 $P_2O_5$로 구성된다. 제조된 SAP을 $650-850^{\circ}C$에서 폐용융염과 반응시켜 각 금속염화물에 대한 반응특성 및 열안정성을 조사하고, PCT 침출시험법을 이용하여 수화학적 안정성을 평가하였다. LiCl은 $LixAlxSi1-_xO_{2-x}$와 $Li_3PO_4$로, CsCl는 CS-aluminosilicate와 $CS_2AlP_3O_{10}$로, $SrCl_2$는 $Sr5(PO_4)_3Cl$로, $CeCl_3$는 $CePO_4$로 전환되었다. 9시간 동안 반응시킨 후, 금속염화물의 전환율은 $90{\sim}99%$였으며, $1100^{\circ}C$까지 열감량은 1wt%이하로 TGA(Thermo Gravimetric Analysis)로 확인하였다. Cs 및 Sr의 침출속도는 $10^{-2}{\sim}10^{-4}g/m^2\;day$로 매우 높은 내침출특성을 나타내었다. 이상의 결과로부터, SAP으로 명명된 안정화제(stabilizer)는 금속염화물로 구성된 폐용융염에 대해 매우 효과적인 것으로 판단된다. SAP을 이용한 폐용융염의 고화처리방법은 후속적인 안정성의 검증과정을 통하여 폐용융염의 최종처분부피를 최소화할 수 있는 대안적인 고화방법으로 고려될 수 있을 것으로 기대 된다.

• Journal of Electrochemical Science and Technology
• /
• 제10권3호
• /
• pp.335-343
• /
• 2019

In this study, $Sr_2Ni_{1.8}Mo_{0.2}O_{6-{\delta}}$ (SNM) with a double perovskite structure was investigated as an alternative anode for use in the $CH_4$ fuel in solid oxide fuel cells. SNM demonstrates a double perovskite phase over $600^{\circ}C$ and marginal crystallization at higher temperatures. The Ni nanoparticles were exsolved from the SNM anode during the fabrication process. As the SNM anode demonstrates poor electrochemical and electro-catalytic properties in the $H_2$ and $CH_4$ fuels, it was modified by applying a samarium-doped ceria (SDC) coating on its surface to improve the cell performance. As a result of this SDC modification, the cell performance improved from $39.4mW/cm^2$ to $117.7mW/cm^2$ in $H_2$ and from $15.9mW/cm^2$ to $66.6mW/cm^2$ in $CH_4$ at $850^{\circ}C$. The mixed ionic and electronic conductive property of the SDC provided electrochemical oxidation sites that are beyond the triple boundary phase sites in the SNM anode. In addition, the carbon deposition on the SDC thin layer was minimized due to the SDC's excellent oxygen ion conductivity.