• 콘크리트학회논문집
• /
• 제23권1호
• /
• pp.77-86
• /
• 2011

복합구조의 합성단면에서 콘크리트 크리프변형은 합성단면에 추가 변형을 발생시키며, 장기변형의 일부 구속에 의한 응력이완은 콘크리트단면에 도입된 선압축응력의 심각한 손실을 초래할 수 있다. 이 논문에서는 복잡한 합성단면의 콘크리트 크리프변형에 대해 공학적인 목적에서 단순 해석이 가능한 이완계수법을 유도하고, 이완계수법에 요구되는 응력이완계수 식을 제안하였다. 이완계수법은 크리프계수와 합성단면의 환산단면특성 및 하중특성을 매개변수로 사용하는 균등 크리프계수 단계별계산법(CC-SSM)과 같은 방법으로 유도되었다. 제안된 이완계수 식에 의한 응력이완계법의 오차는 CC-SSM으로부터 평가된 이완계수법의 평균 응력이완계수에 의한 오차보다 향상되었으며, 자유상태에서 크리프변형에 대한 제안식에 의한 이완계수법 반응의 평균오차율은 3보다 크지 않은 크리프계수에 대해 1.2%보다 작으며, 99% 신뢰도에서 최대 3.3%이었다. 제안된 응력이완계수 식은 크리프변형에 대한 합성단면의 내부구속 정도를 반영하며, 외부구속 효과를 분석하기 위한 전산구조해석에서 응력이완계수가 적용된 유효탄성계수는 합성단면의 요소에 대한 강성 계산에 효율적으로 적용될 수 있다.

• 한국강구조학회 논문집
• /
• 제26권6호
• /
• pp.499-509
• /
• 2014

본 연구에서는 해결방안으로 내부 콘크리트를 강섬유와 혼입하여 기둥자체의 연성과 인성을 증대시키는 것에 중점을 맞추고 있다. 즉, 강섬유 혼입량과 하중조건에 따른 내력 및 변형능력을 종합적으로 파악하여 강섬유 콘크리트와 용접조립각형 강관기둥의 상호작용을 구조, 내화측면에서 분석해 보고자 한다. 동일한 형상과 경계조건(하중비)에서 강섬유 혼입(0.375%)으로 내화성능은 약 1.1~1.3배 향상된 실험결과를 얻을 수 있었다. 강섬유 콘크리트의 균열 억제 특성은 열 하중에 의한 콘크리트의 변형저항 성능을 증가 시키면서 내화성능의 향상을 가져온 것으로 판단된다. 또한, 내부 리브의 열 변형에도 내부 콘크리트 단면은 건전한 상태로 남아있어 하중 분담능력이 증폭된 결과로 분석됐다.

• 한국강구조학회 논문집
• /
• 제25권4호
• /
• pp.347-357
• /
• 2013

최근, 콘크리트 충전강관 기둥(CFT)은 우수한 구조성능을 인정받아 현장적용이 활발하게 이뤄지고 있다. 한편 강재개발과 가격 상승으로 인해 단면을 효율적으로 사용하고자 하는 연구가 지속적으로 진행되고 있다. 본 연구실에서는 단면의 효율을 극대화 하기 위해 얇은 L형 플레이트 4개를 각형강관으로 형성한 단면을 제안한다. 이로 인해 강관 내부에 형성된 리브는 폭 중앙에 위치하고 있어 콘크리트와의 앵커역할이 가능하다. 또한 동일한 단면적을 갖는 일반 CFT기둥에 비해 우수한 좌굴내력과 변형성능이 발휘됨을 실험으로 평가되었다. 본 연구에서는 활용범위를 넓히고자 얇은 강판으로 조립된 신형상 기둥을 제안하며 구조적 성능을 재평가 하고자 한다. 실험 주요변수 폭두께비(b/t: 78,96,107) 이다. 실험결과 규준에서 제시하고 있는 폭두께비를 초과했음에도 내부에 설치된 리브의 앵커역할로 인해 충분한 내력을 발휘하며, 변형성능 향상에 유리한 것으로 분석되었다.

• 한국강구조학회 논문집
• /
• 제14권4호
• /
• pp.471-479
• /
• 2002

본 논문에서는 고강도콘크리트충전 각형강관장주에 대한 실험결과와 탄소성해석결과를 비교분석했다. 실험체는 모두 고강도콘크리트 충전 각형강관장주로 18개를 제작하였으며, 편심비에 따라 중심 및 편심가력하였다. 본 연구의 주요 파라메타는 단면폭에 대한 유효좌굴 길이의 비($L_K$/D)= 4, 8, 12, 24, 30와 가력편심비(e)=0, k, 3k이다. 본 논문에서 고강도콘크리트 충전 각형강관장주의 내력에 관한 해석 및 실험을 통하여 다음과 같은 결과를 얻었다. $L_K$/D=12 이하의 고강도콘크리트충전 각형강관단주는 콘크리트 감소계수 $c{\gamma}u=0.85$를 고려한 전소성내역에 도달했으나, $L_K$/D=18 이상의 장주실험체는 콘크리트 감소계수를 고려한 전소성내력에 도달하지 않았다. 실험에 의한 고강도콘크리트충전 각형강관장주의 탄소성거동은 제안된 해석치의 종국내력$N_{ASSUMED}$과 비교적 양호한 접근을 보여주었다. 콘크리트 압축강도의 감소계수 $c{\gamma}u=0.85$를 고려하지 않은 CFT설계기준과 고강도 콘크리트를 충전한 각형강관기둥의 실험결과치는 비교적 잘 일치함을 알 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.547-556
• /
• 2019

Thinned, small larch logs have small diameters and no value-added final use, except as wood chips, pallets, or fuel wood, which are products with very low economic value; however, their mechanical strength is suitable for structural applications. In this study, small larch logs were sawed, dried, and cut into square timbers (with a $90mm{\times}90mm$ cross section) that were laterally glued to form core panels used to manufacture cross-laminated timber (CLT) wall panels. The surface and back of these core panels were covered with 12-mm-thick structural plywood panels, used as cross bands to obtain three-ply CLT wall panels. This attachment procedure was conducted in two different ways: gluing and pressing (CGCLT) or gluing and nailing (NGCLT). The size of the as-manufactured CLT panels was $1,220mm{\times}2,440mm$, the same as that of the plywood panels. The final wall panels were tested under lateral shear force in accordance with KS F 2154. As the lateral load resistance test required $2,440mm{\times}2,440mm$ specimens, two CLT wall panels had to be attached in parallel. In addition, the final CLT panels had tongued and grooved edges to allow parallel joints between adjacent pieces. For comparison, conventional light-frame timber shear walls and midply wall systems were also tested under the same conditions. Shear walls with edge nail spacing of 150 mm and 100 mm, the midply wall system, and the fabricated CGCLT and NGCLT wall panels exhibited maximum lateral resistances of 6.1 kN/m (100%), 9.7 kN/m (158%), 16.9 kN/m (274%), 29.6 kN/m (482%), and 35.8 kN/m (582%), respectively.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제36권1호
• /
• pp.23-38
• /
• 2022

본 연구는 Newton의 Principia의 핵심인 역제곱 법칙의 증명에서 'QT²/QR가 통경으로 수렴'하는 것을 보여주는 증명의 난해함을 극복하기 위하여, Newton 증명을 발견적으로 볼 수 있는 하나의 관점을 제시하였다. 그것은 QR/QT²의 분모와 분자를 공액지름 쌍과 관련한 선분으로 나타내면 Apollonius의 Conic sections에 등장하는 이들 사이의 관계(PV × VG/QV² = PC²/CD²)에 의해 모종의 원하는 값인 어떤 상수의 값을 얻을 수 있을 것이라는 믿음이 증명의 출발점이라는 관점이다. 본 연구에서 제안한 발견적 관점은 식 QT²/QR 변형의 방향을 제시함으로써, 독자들이 Newton 증명을 보다 쉽게 이해할 수 있게 돕는다는 점에서 그 의의를 찾을 수 있다.

• Journal of electromagnetic engineering and science
• /
• 제17권3호
• /
• pp.153-158
• /
• 2017

This work reports on the effect of plasma area on the frequency characteristics of the monostatic radar cross section (RCS) of a square metallic plate. A dielectric barrier discharge (DBD) plasma actuator consisting of 10 rings is proposed. The actuator is fabricated in three different configurations such that only three inner rings, seven inner rings, and all rings can be biased. By applying an 18-kV bias at 1 kHz, the three types of DBD actuators generate plasma with a total area of 16.96, 36.74, and $53.69cm^2$, respectively, in a ring or circular form. The experimental results reveal that when the DBD actuator is placed in front of a $20mm{\times}20cm$ conducting plate, the monostatic RCS is reduced by as much as 18.5 dB in the range of 9.41-11.65 GHz. Furthermore, by generating the plasma and changing the area, the frequency of maximum reduction in the monostatic RCS of the plate can be controlled. The frequency is reduced by nearly 20% in the X band when all rings are biased. Finally, an electromagnetic model of the plasma is obtained by comparing the experimental and full-wave simulated results.

• Journal of Korean Dental Science
• /
• 제1권1호
• /
• pp.15-21
• /
• 2008

Purpose : This epidemiological research was conducted to investigate the relationship between the groups of TMD and the behavioral, psychological, and physical symptoms through RDC/TMD. Subjects and Methods : The subjects of this research were the 286 patients who had visited Seoul National University Bundang Hospital; their common chief complaint was temporomandibular discomfort. The mean age of the patients was 32.9 from 11 to 85, and the number of men and women was 67 and 219, respectively. The patients were examined through clinical and radiological methods and diagnosed by 1 investigator. They were divided into 3 groups: myogenous group (group 1), arthrogenous group (group 2), and combined group (group 3). The behavioral, psychological, and physical symptoms were evaluated through questionnaires on RDC/TMD. Specific items were selected to calculate the graded chronic pain (characteristic pain intensity, disability points), jaw disability, depression, and non-specific physical symptoms (pain items included/excluded) in the questionnaire. One-way ANOVA, Kruskal-Wallis test, and chi-square test were applied as statistical methods. Results : As a result of classifying temporomandibular disorder in this study, the patients were distributed as follows: 9.1% of group 1, 79.7% of group 2, and 11.2% of group 3. In the analysis of graded chronic pain (characteristic pain intensity, disability points), jaw disability, and non-specific physical symptoms (pain items included/excluded), group 3 had the highest score, and the difference was significant (p<0.001). Moreover, the depression score of group 3 was significantly higher than groups 1 and 2 (p<0.05). Note that that the second order of jaw disability score was group 2, on the other hand, those of the other groups were group 1. Conclusion : Myofascial pain could be assumed to be related closely to the behavioral, psychological, and physical symptoms except jaw disability compared to joint pain through RDC/TMD.

• 한국패션뷰티학회지
• /
• 제1권1호
• /
• pp.105-118
• /
• 2003

The purpose of this study was to analyze entertainer Byeon Jeong-su's hair styles and thereby, apply the results to models. For the applications, models' hair styles were bisected into two sections, and thereby, the edges of the outsides were cut into solid points, and thereupon, into diverse bases by using vertical section, Perpendicular direction and square angles. On the other hand, the insides were cut in the same way of the outside bases by using radial section, varied combing and $45{\sim}90$ degree head angles. In addition, tops and sides were arranged in their corners, while a graduation technique was used to express a natural difference of levels. The fringes were cut by using free-hand and slicing techniques. furthermore, the quantity and mass of the hairs were treated with such techniques as thinning, swing, effect, rolling, slide and slicing, while a bridge product was used for coloring together with a highlight technique. The hair styles were rendered for straight and wave by using an magic iron machine. It was confirmed through this study that the same cutting techniques would result in different images depending on individuals' physical shapes, facial shapes, head skeletons and types of hairs. Thus, it is required of the hair designers to suggest their own custom hair designs adequate to individuals' images through continued image-wise hair design practices.

• Journal of the Korean Wood Science and Technology
• /
• 제39권2호
• /
• pp.132-139
• /
• 2011

This study examined the characteristics of radio-frequency/vacuum dried Korean red pine ($Pinus$ $densoflora$) heavy timbers with 250 ${\times}$ 250 mm (S), 300 ${\times}$ 300 mm (L) in cross section and 300 mm in diameter, and 3,600 mm in length, which were subjected to compressive loading after a kerf pretreatment. The following results were obtained : The drying time was short and the drying rate was high in spite of the large cross section of specimens. The moisture gradient inall specimens was gentle in both longitudinal and transverse directions owing to dielectric heating. The shrinkage of the width in the direction perpendicular to was 21 percent ~ 76 percent of that of the thickness of square timbers in the direction parallel to the mechanical pressure. The casehardening for all specimens was very slight because of significantly reduced ratio of the tangential to radial shrinkage of specimens and kerfing. The surface checks somewhat severely occurred although the occurrence extent of the surface checks on the kerfed specimens was slight compared withthat on the control specimen.