• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.12
• /
• pp.709-717
• /
• 2004

Flux-reversal machine (FRM) is a new brushless doubly salient permanent magnet machine. Its operation is similar to that of the brushless DC motor, so it can be driven by 120 degree square wave voltage and use PWM pulse patterns in two-phase feeding scheme to control the speed. In this driving method, the back electromotive force (BEMF) current in the open phase is generated by the BEMF. It can be appeared or disappeared according to the changes of the neutral voltage of the machine. In this paper, the time-stepped voltage source finite-element method taking BEMF current into account is proposed. Its influences on the performances of the FRM are also investigated. To prove the propriety of the proposed analysis method, a Digital Signal Processor (DSP) installed experimental devices are equipped and the experiment is performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1066-1070
• /
• 1990

This paper presents a method for the optimal control of the distributed parameter systems (DPSs) by a hierarehical computational procedure. Approximate lumped parameter systems (LPSs) are derived by using the Galerkin method employing the Legendre polynomials as the basis functions. The DPSs however, are transformed into the large scale LPSs. And thus, the hierarchical control scheme is introduced to determine the optimal control inputs for the obtained LPSs. In addition, an approach to block pulse functions is applied to solve the optimal control problems of the obtained LPSs. The proposed method is simple and efficient in computation for the optimal control of DPSs.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.484-486
• /
• 1997

In this paper, we compose of the utility phovoltaic system with the stepdown chopper and the current source inverter to reduce pulsation of dc current and dc reactor. We study that control several ways(twice frequency of utility voltage square pulse and without the chopper) of chopper part. Therefore if voltage across the dc reactor equal to zero, it is decreased. And we control modulation factor of the chopper to operate at maximum power point around of solar cell.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.53-55
• /
• 2008

In high speed applications, the slotless permanent magnet(PM) motors appear an attractive solution, being almost insensitive to magneto-motive force harmonics and to pulse width modulation(PWM) current ripple and exhibiting lower stator iron losses and rotor losses (significant with square wave current control). So, this paper deals with methods for design of permanent magnet synchronous motor/generator.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.304-309
• /
• 2005

This paper presents an electronic ballast using a step down converter, a low frequency inverter for high intensity short-arc discharge lamp. The proposed ballast is composed of a full-wave rectifier, a step down converter operated as a current source with power regulation and a low frequency inverter with external ignition circuit. The ignition circuit generates high voltage pulse of $3{\sim}5[kV]$ peak, 130[Hz] periodically. Moreover, it is able to reignite at regular intervals by protective circuit. As experimental results on the test, acoustic resonance phenomenon is eliminated by operating the low frequency square wave voltage and current. Lamp voltage, current and consumption power are measured 123.8[V], 8.1[A] and 1,002[W], respectively. It was confirmed that the designed ballast operate the lamp with a constant power.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.427-431
• /
• 2002

A screen printed graphite electrode has been developed for a simple and sensitive determination of phenolic compounds in an aqueous solution. The electrode developed uses a simple and effective screen printing technique with ${\alpha}-Cyclodextrin({\alpha}-CD)$ modified graphite ink. Phenols were captured on the surface of the ${\alpha}-CD$ modified electrode through complex formation. The phenol/ ${\alpha}-CD$ complex was deposited and quantified electrochemically using cyclic voltammetry (CV), differential pulse voltammetry (DPV) and square wave voltammetry (SWV). The optimization of the experimental parameters was performed in regard to electrode composition, pH, temperature, sample preconcentration time. Interferences from other organic compounds were investigated. The detection limit for phenols was 500 ${\pm}7$ nM for DPV, with the linear range of 0.5 ${\mu}M$ -25.0 ${\mu}M$ and 30 ${\pm}2$ nM for SWV, with the linear range of 30 nM - $50{\mu}M$, respectively.

• Journal of Korean Academic Society of Home Health Care Nursing
• /
• v.16 no.2
• /
• pp.108-114
• /
• 2009

Purpose: This study utilized a nonequivalent control group pre-post test design to test the effects of foot massage on anxiety and sleep satisfaction response in preoperative patients undergoing abdominal surgery. Method: There were 40 subjects in the study (20 in the experimental group and 20 in the control group). The experimental group received foot massage once a day for 2 days before their operation. Data were analyzed with descriptive statistics including mean, percentage, Chi-square, and t-test. Results: There were significant differences between experimental group and control group in the level of the state anxiety, pulse rate, and sleep satisfaction. Conclusions: Foot massage was effective in reducing anxiety and improving sleep satisfaction in abdominal surgical patients before their operation. Thus, foot massage may be used as an independent nursing intervention. This intervention can be performed anywhere, requires no special equipment, is noninvasive, and does not interfere with patients' privacy.

• Korean Journal of Materials Research
• /
• v.7 no.5
• /
• pp.381-385
• /
• 1997

PEMOCVD에 의해서 SrBi$_{2}$Ta$_{2}$O$_{9}$밥막이 낮은 온도에서 성공적으로 Pt/Ti/SiO$_{2}$Si위에 증착되었다. 5$50^{\circ}C$에서 증착된 200nm박막은 치밀하고 작은 결정립을 보였으며 3V의 인가전압하에서 이력곡선은 포화되기 시작하였다. 3V에서 박막은 잔류분극 (P$_{r}$)과 항전계(E$_{c}$)는 각각 15$\mu$/$\textrm{cm}^2$과 50kV/cm이었다. 6V bipolar square pulse의 피로측정에서 박막은 1.0x$10^{11}$cycles까지 피로 현상을 보이지 않았다. PEMOCVD에 의해서 5$50^{\circ}C$에서 증착된 SBT박막은 비휘발성 기억소자에 충분히 활용할 수 있다.다.

• Laser Solutions
• /
• v.11 no.2
• /
• pp.20-25
• /
• 2008

Polyimide is one of the useful materials in industry. The surface treatment of polyimide by a femtosecond laser can help accurate and fine fabrication of microstructure. And it can change the transmittance and reflectance of polyimide, too. We put femtosecond laser pulses on polyimide for rectangular or square type surface treaments and observe the change of transmittance and reflectance. Pulsewidth is 172 fs, laser power changes for fabrication are from 5 mW to 20 mW, and transmittance and reflectance are measured under 20m W, 300m W, and 920 mW. Pulse patterning is stable and almost no unwanted surface damage is shown. As power increases, working depth increases but working line width does not increase significantly. As speed changes, they also have same results. It shows the efficiency of a femtosecond laser is good and thermal damage is small for polyimide.

• Current Optics and Photonics
• /
• v.3 no.3
• /
• pp.243-247
• /
• 2019

We have developed a compact, wavelength-selectable, Q-switched Nd:YAG laser at mid ultraviolet for chemical warfare agent detection. The fundamental wave at 1064 nm is delivered by a pulsed solid state laser incorporating with a square-type Nd:YAG rod in a resonator closed by two crossed Porro prisms for environmental reliability. The output energy at 213 nm ($5{\omega}$) and 266 nm ($4{\omega}$) by ${\chi}^{(2)}$ process in the sequentially disposed BBO crystals are measured to be 6.8 mJ and 15.1 mJ, respectively. The output wavelength is selected for $5{\omega}$ and $4{\omega}$ by a motorized wavelength switch. The energy ratio of the $5{\omega}$ to the $4{\omega}$ is varied from 0.05 to 0.85 by controlling the phase matching temperature of the nonlinear crystal for sum-frequency generation without change of the output pulse parameters.