• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.237-246
• /
• 1999

A miniaturized waveguide bandpass filter is designed by combining a corrugated lowpass structure and a highpass configuration based on the cut-off effect of waveguides. It is smaller than the conventional waveguide bandpass filter composed of half-wavelength resonators and has wider spurious free characteristics. Optimized design data for a seven-order waveguide bandpass filter with the symmetrical structure are given at the center frequency of 10 GHz with 800 MHz bandwidth. Measured bandwidth of the center frequency of 9.97 GHz is 840 MHz and measured insertion loss is 0.97dB, The length of the bandpass filter is 64.38mm. The first spurious response is produced at 26.1 GHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.104-109
• /
• 2012

In this paper, we propose a way to improve the quality of L-band wireless communication from unfriendly influential factors lying in the neighboring RF bands. The UHF-band system has resonator components and they generate harmonics as the spurious in the L-band. Therefore, a metamaterial CRLH bandpass filter is designed for the purpose of system miniaturization and smaller insertion loss, and its spurious phenomenon is observed in the frequency domain. And its harmonics in the L-band are suppressed by a compact bandstop filter whose equivalent circuit is newly developed. The design methodology is validated by the equivalent circuit to be compared with commercial full-wave EM software simulations, where the spurious is dropped by 20dB. Also, the advantage of the proposed design is presented by the comparison where our filter is much smaller than the conventional parallel edge coupled filter by over 50%, with excellent harmonic suppression.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.963-965
• /
• 2009

For the low power wireless installations, limited frequency resources are divided by use for their effective use and are assigned. Moreover, output strength is limited according to the frequency used in order to protect other wireless stations from interference caused by radio waves emitted from the low power wireless installations. For receivers, unwanted spurious emission is regulated, and regulations in Korea define that additional spurious emission for receivers in the low power wireless installations under 1GHz should be -54dBm, but no regulations have been established yet for low power wireless installations over 1GHz. It is presently required to set domestic standards for devices over 1GHz on account of the expansion of the communication market and its service.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.117-123
• /
• 2006

In this paper, a CPW lowpass filter with the spurious-reduced characteristic is designed by using DGS(Defected Ground Structures). By cascading two lowpass filters with different harmonic characteristics the spurious is reduced below - 15 dB. Additionally by combining a dumbbell shaped DGS to the filter we achieved a satisfactory spurious level of less than -25 dB to above three times cutoff frequency without any repeated passband. The fabricated LPF shows a compact size of $17.2mm{\times}6.8mm$, a cutoff frequency of 6 GHz, and a sharp skirt response of 7-order with two notch frequencies. The measured frequency responses agree well with simulated ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8C
• /
• pp.529-535
• /
• 2011

After permission for utilization of TV white space by FCC, a lot of attentions are focused on spectrum sensing, and various spectrum sensing methods have been proposed. However, they do not consider real environment, thus they are hard to achieve the required performance. In this paper, we propose resolutions for the problem which could be occurred in implementation of spectrum sensing module and verify performance of the proposed methods with computer simulation. The first proposed method utilizes channel status information to separate received signal and spurious for reducing false alarm probability caused by system internal spurious. The another proposed scheme is subband normalization method to prevent miss detection caused by multiple narrow band signals with different received signal strength. The simulation results verify that we can prevent false alarm cause by spurious components with the proposed system internal spurious cognition. Moreover, the proposed subband normalization method shows that it could overcome performance degradation caused by received signal strength difference.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.134-139
• /
• 2019

This paper describes the effect of multiple signal regeneration in quadrature digital radio frequency memory(DRFM). Single channel DRFM have good reproducibility after storing a single signal. However, when reproduced after storing multiple signals, the spurious signal is large. The quadrature DRFM consists of I and Q channels, which can greatly reduce the spurious signal. The amplitude of the spurious signal depends on the number of bits of data stored in the DRFM. In this paper, we have obtained the number of bits of signal regeneration according to the application of radio frequency memory by obtaining the size of the spurious signal according to the number of bits of the stored data of the DRFM for multiple signals. As a result of this study, 4 bits quadrature DRFM can achieve a spurious output of less than -20dB, which is used for 4 signals. Those are expected to greatly contribute to the signal analysis of electronic warfare equipment and the development of jamming device.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.136-143
• /
• 2018

In this study, we conducted a pilot study on the multiple spurious operations (MSO) analysis in the fire probabilistic safety assessment (PSA) of domestic nuclear power plant (NPP) to identify the degree of influence of the operator actions used in the MSO mitigation strategies. The MSO scenario of the domestic reference NPP selected for this study is refueling water tank (RWT) drain down event. It could be caused by spurious operations of the containment spray system (CSS) of the reference NPP. The RWT drain down event can be stopped by the main control room (MCR) operator actions for stopping the operation of CSS pump or closing the CSS motor operated valve if the containment spray actuation signal (CSAS) is spuriously actuated. Outside the MCR, it can be stopped by operator actions for closing the CSS manual valves or motor operated valve or stopping the operation of CSS pump. The quantification result of a fire PSA model that takes into account all recovery actions for the RWT drain down event lead to risk reduction by about 95%, compared with quantification result of fire PSA model without considering them. Among the various operator actions, the recovery action for the spurious CSAS operations and the operator action for the manual valve are identified as the most important operator actions. This study quantitatively showed the extent to which the operator actions used as MSO countermeasures have affected the fire PSA quantification results. In addition, we can see the rank of importance among the operator recovery actions in quantitative terms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.176-179
• /
• 2006

As spurious emission strength is normally measured at the antenna feeder, It is required that the measurement method on passive Intermodulation occurred on the latter part of antenna feeder be made. through the tests and the analyses of passive Intermodulation between radiostations of adjacent frequency bands, the possibility of occurrence of passive Intermodulation was testified in this study. The purpose of this study is to propose the measurement method of spurious emission strength in order to prevent the bad effect by passive Intermodulation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.673-680
• /
• 2017

In the proposed paper, we designed low noise frequency synthesizer with compact size for Multi-Band. The proposed frequency synthesizer consists of fundamental frequency band(2 GHz) and harmonic frequency band(4 GHz). To improve the phase noise and spurious level of frequency synthesizer, we analyze how the configuration of frequency synthesizer affect the phase noise and design the multi-band's structure. The implemented frequency synthesizer reduce both the phase noise and spurious level. The phase noise is -92.17 dBc/Hz at 1 kHz frequency offset in 2 GHz and -90.50 dBc/Hz at 1 kHz frequency offset in 4 GHz. All spurious signals including fundamental frequency are suppressed at least 20 dBc than the second harmonic frequency.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.293-295
• /
• 2003

In this paper, planar harmonic rejection low-pass filter is proposed to effectively suppress spurious response in stop-band. For suppress the unwanted signal such as spurious and harmonics, we presented a new design method controlled the higher order modes. The proposed low-pass filter was shown to suppress the spurious response by more than $20{\sim}40dB$ compared with conventional microstrip low-pass filters. The filter is evaluated by experiment and simulation with good agreement and shown to have attractive properties such as wide stop band range and low insertion loss.