• The Korean Journal of Pesticide Science
• /
• v.6 no.4
• /
• pp.271-278
• /
• 2002

Methanol extracts from 420 samples of 173 plant species in 58 families were tested at 5000 ppm for their insecticidal and acaricidal activities against five economically important arthropod pests by spray method. The responses varied with arthropod pest species, plant species and plant tissue sampled. In a test with Nilaparvata lugens Stal, extracts from Zanthoxylum piperitum barks, Chamaecyparis obtusa leaf and Quercus salicina leaf showed potent insecticidal activity. With Plutella xylostella L., potent larvicidal activity was observed from extracts of Platycarya strobilacea wood, Meliosma myriantha barks, Sophora japonica leaf, Zanthoxylum piperitum barks, and Pinus thunbergii wood. Methanol extracts of Sophora japonica leaf and Zanthoxylum piperitum barks showed high insecticidal activity against Spodoptera litura. In a test with Tetranychus urticae Koch, extract from Carpinus coreana leaf, Firmiana simplex barks, Elaeagnus macrophylla leaf, Aralia elata leaf, Comus controversa barks and Chamaecyparis obtusa leaf exhibited strong acaricidal activity. As a naturally occurring pest control agent, Zanthoxylum piperitum barks could be useful as new insecticidal and acaricidal products against various arthropod pests.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.56-65
• /
• 2016

Pine wood nematode, Bursaphlenchus xylophilus is a fatal damaging pest, infecting pinewood trees and is one of the serious forest pest in Korea. Trunk injection is one of the most effective method to protect the live pine trees from nematode infection. The aim of this research was to reveal the efficacy of the nematicidal materials from 46 Kyrgyzstan, 88 Vietnam plant materials and 21 active materials (${\alpha}$-terpinene, ${\alpha}$-pinene, ${\beta}$-thujaplicin, cinnamaldehyde, eugenol, emodin, geraniol, limonone, methyl palmitate, matrine, myrcene, methyl gallate, nicotine, quassin, resveratrol, rotenone, thymol, thujaplicin, terthiophene, tuberstemonine, ${\gamma}$-terpinene) isolated from plants for using as trunk injection agents. Eclipta prostrata extract was highly effective against pine wood nematode in plant extracts and terthiophene has the best nematicidal activity from active materials isolated from plants. Foliar spray of terthiophene on Japanese black pine (Pinus thunbergii) tree reduced proliferation of inoculated pine wood nematode at 22 days after treatment, however no efficacy was found over 22 days. Eclipta prostrata extract and terthiophene can be used as nematicide for further nematicidal efficacy test against any other plant parasitic nematodes and trunk injection efficacy against pine wood nematode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.248-255
• /
• 2020

The effects of the coating thickness on the thermal durability and thermal stability of thermal barrier coatings (TBCs) with a gradient coating thickness were investigated using a flame thermal fatigue (FTF) test and thermal shock (TS) test. The bond and topcoats were deposited on the Ni-based super-alloy (GTD-111) using an air plasma spray (APS) method with Ni-Cr based MCrAlY feedstock powder and yttria-stabilized zirconia (YSZ), respectively. After the FTF test at 1100 ℃ for 1429 cycles, the bond coat was oxidized partially and the thermally grown oxide (TGO) layer was observed at the interface between the topcoat and bond coat. On the other hand, the interface microstructure of each part in the TBC specimen showed a good condition without cracking or delamination. As a result of the TS test at 1100 ℃, the TBC with gradient coating thickness was initially delaminated at a thin part of the coating layer after 37 cycles, and the TBC was delaminated by more than 50% after 98 cycles. The TBCs of the thin part showed more oxidation of the bond coat with the delamination of topcoat than the thick part. The thick part of the TBC thickness showed good thermal stability and oxidation resistance of the bond coat due to the increased thermal barrier effect.

• Membrane Journal
• /
• v.25 no.1
• /
• pp.75-83
• /
• 2015

In this study, chlorophylls were been extracted from common local plants, deposited on polypropylene (PP) substrate using various approaches, and the oxygen generation effect of the chlorophylls were investigated. The loading of chlorophylls on the substrates was achieved by dipping and spraying methods, where the spraying coating showed overall better results regarding oxygen generation from the combustion experiments in the closed vessel or in the isolated vacuum oven cell than those of dip coating. In addition, a composite substrate was prepared by nylon6/6 nanofiber on the PP substrate, and it exhibited an increase in the activation of chlorophylls. In the case of samples containing titanium dioxide ($TiO_2$), the reaching time of oxygen concentration from 16% to 21% and the combustion test using a candle for a sample with 50% chlorophylls showed similar results to those of a sample without $TiO_2$. As such, combining a spray coating and $TiO_2$ incorporation into gas separation membrane systems are expected to be useful to understand the fundamentals of material properties for their applications as oxygen generation membranes and air filtration systems.

• Journal of Environmental Health Sciences
• /
• v.44 no.4
• /
• pp.301-314
• /
• 2018

Objectives: The aim of this study was to introduce the overall progress of exposure assessment to humidifier disinfectant (HD); to present participants' demographic characteristics, exposure characteristics to humidifier disinfectant, and exposure classification; and furthermore to compare those characteristics between survivors and non-survivors. Methods: An assessment of environmental exposure to HD was conducted using modified HD-specific questionnaires that had been previously validated. We analyzed the data from 4,482 participants who had been potentially exposed to HD and had registered with the KEITI (Korea Environmental Industry & Technology Institute) from September 2016 to May 2018 (the fourth survey). Environmental exposure assessments were performed as follows: 1) contact with participants, 2) environmental exposure assessment though face-to-face interviews, 3) assessment review and coding, and 4) exposure rating. Results: Overall, survivors made up 77.1% (3,457 subjects) and non-survivors made up 22.9% (1,025 subjects). When compared with the survivors, non-survivors had a higher proportion of subjects aged >60 years and subjects who answered as suffering lung damage and having purchased HD because it is "Beneficial to health" (p<0.05). For the exposure characteristics compared to survivors, non-survivors had a higher proportion of cases of distance from humidifier to face being less that one meter and the spray direction being toward the face (p<0.05). Overall, respondents who used the "Oxy Ssak Ssak New Gaseupgi Dangbun", "Aekyung Gaseupgi Mate", "Homeplus Gaseupgi Chungjungje", and "E-Mart Gaseupgi Salgyunje" products made up 66.1, 12.3, 4.0, and 3.6%, respectively, and 72.5% of respondents used products with PHMG as the active chemical. When compared with survivors, non-survivors had a higher proportion of use of "Oxy Ssak Ssak New Gaseupgi Dangbun" but a lower proportion of use of products with CMIT/MIT, PGH, or PHMG as the active chemical. Conclusions: This study provided demographic characteristics and exposure assessment for applicants who have been injured by HD. In spite of the limitations of performing past exposure assessment through a questionnaire survey, such as recall bias, useful results may be obtained by comparing survivors with non-survivors. Further studies such as the exposure rating method and so on are necessary to assess past exposure to HD.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.255-260
• /
• 2008

STATEMENT OF PROBLEM: Preparation of implant beds with lasers is considered a safe and reliable method, but the accuracy of this technique has not been examined. PURPOSE: The purpose of this study was to evaluate the accuracy and effectiveness of implant bed preparation using an Er,Cr:YSGG laser. MATERIAL AND METHODS: An Er,Cr:YSGG laser was applied to pig rib bone. The laser was employed at a 5.75 W power setting, 30 Hz/sec pulse repetition, and 70 ${\mu}s$ pulse duration with 50 % water and 60% air spray. According to laser tips the groups were divided as follows; Group 1: paralleled - shaped sapphire tip (0.6 mm${\Phi}$), Group 2: paralleled - shaped zirconia tip (0.6 mm${\Phi}$), Group 3: tapered sapphire tip (0.4 mm${\Phi}$). The Er,Cr:YSGG laser tip was separated by 1 mm from the bone and applied for 15 seconds in a non-contact mode. After the application, the bone was sectioned for specimens. Histologic measurements were determined by computerized morphometry. The length of the prepared bone surface was measured and the width of the entrance was measured. The results were analyzed with one-way ANOVA (P<0.05). RESULTS: The prepared length of group 3 was longer than that of group 2. The prepared bone width was larger than the width of the laser tip in every group. Additional bone removal was observed adjacent to the prepared area and displayed an irregular surface. CONCLUSION & DISCUSSION: Different cutting effects were observed according to the laser tip, emphasizing the importance of proper tip selection in the clinical setting. This preliminary study supported the existence of hydrokinetic effects.

• Journal of Yeungnam Medical Science
• /
• v.24 no.2
• /
• pp.162-169
• /
• 2007

Purpose : It is well known that suspension microlaryngeal surgery produces marked increases in arterial blood pressure and heart rate. In this study, we evaluated the effects of 10% lidocaine preoperatively sprayed for attenuation of the perioperative hemodynamic response during suspension microlaryngeal surgery. Materials and Methods : Fifty American Society of Anesthesiologists (ASA) class 1 patients scheduled for excision of a vocal polyp by suspension laryngoscopy were randomly divided into two groups (n=25 for each group). They were intubated without 10% lidocaine spray (control group) or given 1.5 mg/kg of 10% lidocaine sprayed onto the pharyngolaryngeal and intratracheal sites 90 sec prior to intubation (10% lidocaine group). Anesthesia was maintained using desflurane in $O_2/N_2O$ 50%. The arterial blood pressure and heart rate were measured at preinduction (T0), 1 min (T1), 3 min (T2), 5 min (T3) after tracheal intubation, and 1 min (T4), 3 min (T5), 5 min (T6) and 10 min (T7) after the suspension laryngoscopy. Results : In the 10% lidocaine group, the arterial blood pressure and heart rate at 1 (T1), 3 (T2) min after tracheal intubation and 1 (T4), and 3 (T5) min after suspension laryngoscopy were lower than the same measurements in the control group. Conclusion : 10% lidocaine sprayed onto the pharyngolaryngeal and intratracheal sites before intubation was an effective method for attenuation of the perioperative hemodynamic response during suspension microlaryngeal surgery.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.487-493
• /
• 2020

Recently, the ministry of environment banned the use of the existing airless method using the spray in painting industrial facilities. Therefore, it is necessary to develop a pressure-roller attached to existing airless painting systems. The hole design of the SUS piping and drum-bases of pressure-rollers currently developed and sold have not been studied in detail, so their efficiency is questionable. In particular, if sufficient paint is not supplied to both ends of the roller, it is necessary to rework with a brush after painting. Therefore, the holes of the drum base need to be distributed so that the paint can flow to both ends of the roller. In this study, numerical analysis was performed to determine the effects of the hole design in the SUS piping and drum-base on the flow patterns of the paint and to suggest more efficient design measures. The analysis results showed that the uniform placement of the holes in the SUS piping is good for the balanced inflow of the paint. For the drum-base, the paint can flow better into both ends of the roller when the holes are concentrated and machined on both ends of the drum-base.

• KSBB Journal
• /
• v.23 no.1
• /
• pp.65-69
• /
• 2008

The culture broth of a ${\beta}$-glucan-producing bacterium, Paenibacillus polymyxa JB115, was confirmed to show the antibiosis against pathogenic bacteria of livestock disease. The antibacterial substance produced by P. polymyxa JB115 exhibited strong bactericidal or bacteriostatic effect on the growth of livestock pathogenic bacteria including Staphylococcus aureus, Salmonella choleraesuis, Escherichia coli and Pseudomonas aeruginosa. This antibacterial substance also showed high stabilities in broad pH range (pH 3-11) and in broad temperature range $(40-121^{\circ}C)$, which is good enough to apply spray-dry method for the formulation of culture broth. It was also found that the antibacterial substance was very stable in artificial gastric fluid and bile acid, which implies the anticipated antibacterial activity against gastrointestinal bacteria harmful for livestocks. In conclusion, the culture broth of P. polymyxa JB115 can be developed as a multifuctional feed additive containing immune-enhancing ${\beta}$-glucan as well as antibacterial agent against livestock pathogenic bacteria.

• Research in Plant Disease
• /
• v.15 no.3
• /
• pp.236-241
• /
• 2009

The objective of this study was to find an environment friendly method of ginseng storage disease control using a natural plant extract. Essential oil was evaluated in terms of its antifungal ability against a variety of ginseng storage pathogens, and a variety of essential oils was conducted in order to assess the possibility of applying them as a component of a disease control strategy. Direct treatment with essential oil was demonstrated to exert a ginseng storage control effect. Methyl eugenol and thymol were shown to exert a mycelial growth inhibition effect of 80% on PDA media, using a paper disc containing 200 ppm of essential oil against Botrytis cinerea. The application of direct methyl eugenol treatment to ginseng resulted in a profound control effect. Both spray and dipping treatment of each methyl eugenol as well as thymol, evidenced a disease develoment of 10-20% as compared with the over 80% observed from all non-treated packages. Methyl eugenol in the large packages resulted in a disease index of 0.60 in the two essential oil treatments and also a small diseased area, as compared with the disease index of 1.65 and the wide diseased area observed in the non-treatment groups. Treatment with a mixture (methyl eugenol + thymol) in the synergistic effect test resulted in a relatively wide diseased area, as no discernable synergistic effect was detected. Methyl eugenol and thymol can be utilized as control agents in an environmentally friendly ginseng storage treatment, owing to the avirulent and clear effects detected in this study. In particular, ginseng must be ingested when fresh, and this is why a product for the control of ginseng storage diseases is so necessary.