• Applied Biological Chemistry
• /
• v.45 no.4
• /
• pp.207-211
• /
• 2002

This study was conducted to increase the shelf life of grape by edible coating material such as methyl cellulose (MC) with antimicrobial substances, n-capric acid isopropyl ester (ci) and sodium nitrate (sn), added by spraying method. The quality changes of packaged grapes with wrapping PE film on EPS tray were investigated for 16 days at $30{\circ}C$. The shelf-lives of C and MCci based on the weight reduction ratio of 7% were 6 days and 9 days, respectively. The reduction rate of acidity of C was higher value than those of treatments during 18 days of storage at $30{\circ}C$. The vitamin C reduction ratios of C, MCsn and MCci were 64.8, 51.5 and 49.8%, respectively, after 16 days at $30{\circ}C$. The reduction rates of firmness of C, MCsn and MCci after 16 days at $30{\circ}C$ were 44.2, 26.5, and 23,2%, respectively compared to that of initial storage grapes. The additions of ci and sn had much affected the reductions of bacteria and yeast counts especially early stage of storage. The hedonic sensory evaluation scores of MCci and MCsn had higher values than those of MC.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.533-549
• /
• 2017

In this study, drainage systems were proposed to drain the leakage of groundwater in the existing underground concrete structures. The system consists of drainage board, wire mesh, fixed nail, and mortar with mineral. In order to increase constructability, the drainage board and wire mesh were attached on the surface of cement concrete using the air nailer and fixed nail. The mortar with 30% of blast furnace slag was sprayed on the drainage board and wire mesh using the spray mortar equipment. The field test construction was carried out in a conventional concrete lining tunnel and concrete retaining wall for performance verification of the drainage system in the field. There was no problem with performance degradation in the drainage system for three years after construction. The bond strength tests were performed on the sprayed mortar at 14 days and about 3 years after field test construction. In case of attaching the wire mesh on the drainage board, the bond strengths of the sprayed mortar were 1.04 MPa at 14 days and 1.46 MPa about 3 years. In case of the drainage board without the wire mesh, the bond strengths of the sprayed mortar were 1.13 MPa at 14 days and 0.89 MPa, less than 1 MPa of bond strength criteria, about 3 years.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1292-1297
• /
• 2005

The use of ozone in water and wastewater treatment systems has been known to be a process that is limited by mass transfer. The most effective way to overcome this limitation is to increase the interfacial area available for mass transfer by decreasing the size of the ozone gas bubbles that are dispersed in solution. Electrostatic spraying(ES) of ozone into water was investigated in this work as a method of increasing the rate of mass transfer of ozone into a solution and thereby increasing the rate of phenol oxidation. Results were obtained for ES at input power levels ranging from 0 to 4 kV and compared with two different pore-size bubble diffusers($10{\sim}15{\mu}m$ and $40{\sim}60{\mu}m$). It was determined that the rate of mass transfer could be increased by as much as 40% when the applied voltage was increased from 0 to 4 kV as a result of the smaller bubbles generated by ES. In addition, ES was shown to be more effective than the medium-pore-size($10{\sim}15{\mu}m$) bubble diffuser and the best results were achieved at low gas flow rates.

• The Korean Journal of Pesticide Science
• /
• v.6 no.4
• /
• pp.271-278
• /
• 2002

Methanol extracts from 420 samples of 173 plant species in 58 families were tested at 5000 ppm for their insecticidal and acaricidal activities against five economically important arthropod pests by spray method. The responses varied with arthropod pest species, plant species and plant tissue sampled. In a test with Nilaparvata lugens Stal, extracts from Zanthoxylum piperitum barks, Chamaecyparis obtusa leaf and Quercus salicina leaf showed potent insecticidal activity. With Plutella xylostella L., potent larvicidal activity was observed from extracts of Platycarya strobilacea wood, Meliosma myriantha barks, Sophora japonica leaf, Zanthoxylum piperitum barks, and Pinus thunbergii wood. Methanol extracts of Sophora japonica leaf and Zanthoxylum piperitum barks showed high insecticidal activity against Spodoptera litura. In a test with Tetranychus urticae Koch, extract from Carpinus coreana leaf, Firmiana simplex barks, Elaeagnus macrophylla leaf, Aralia elata leaf, Comus controversa barks and Chamaecyparis obtusa leaf exhibited strong acaricidal activity. As a naturally occurring pest control agent, Zanthoxylum piperitum barks could be useful as new insecticidal and acaricidal products against various arthropod pests.

• The Korean Journal of Pesticide Science
• /
• v.20 no.1
• /
• pp.56-65
• /
• 2016

Pine wood nematode, Bursaphlenchus xylophilus is a fatal damaging pest, infecting pinewood trees and is one of the serious forest pest in Korea. Trunk injection is one of the most effective method to protect the live pine trees from nematode infection. The aim of this research was to reveal the efficacy of the nematicidal materials from 46 Kyrgyzstan, 88 Vietnam plant materials and 21 active materials (${\alpha}$-terpinene, ${\alpha}$-pinene, ${\beta}$-thujaplicin, cinnamaldehyde, eugenol, emodin, geraniol, limonone, methyl palmitate, matrine, myrcene, methyl gallate, nicotine, quassin, resveratrol, rotenone, thymol, thujaplicin, terthiophene, tuberstemonine, ${\gamma}$-terpinene) isolated from plants for using as trunk injection agents. Eclipta prostrata extract was highly effective against pine wood nematode in plant extracts and terthiophene has the best nematicidal activity from active materials isolated from plants. Foliar spray of terthiophene on Japanese black pine (Pinus thunbergii) tree reduced proliferation of inoculated pine wood nematode at 22 days after treatment, however no efficacy was found over 22 days. Eclipta prostrata extract and terthiophene can be used as nematicide for further nematicidal efficacy test against any other plant parasitic nematodes and trunk injection efficacy against pine wood nematode.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.248-255
• /
• 2020

The effects of the coating thickness on the thermal durability and thermal stability of thermal barrier coatings (TBCs) with a gradient coating thickness were investigated using a flame thermal fatigue (FTF) test and thermal shock (TS) test. The bond and topcoats were deposited on the Ni-based super-alloy (GTD-111) using an air plasma spray (APS) method with Ni-Cr based MCrAlY feedstock powder and yttria-stabilized zirconia (YSZ), respectively. After the FTF test at 1100 ℃ for 1429 cycles, the bond coat was oxidized partially and the thermally grown oxide (TGO) layer was observed at the interface between the topcoat and bond coat. On the other hand, the interface microstructure of each part in the TBC specimen showed a good condition without cracking or delamination. As a result of the TS test at 1100 ℃, the TBC with gradient coating thickness was initially delaminated at a thin part of the coating layer after 37 cycles, and the TBC was delaminated by more than 50% after 98 cycles. The TBCs of the thin part showed more oxidation of the bond coat with the delamination of topcoat than the thick part. The thick part of the TBC thickness showed good thermal stability and oxidation resistance of the bond coat due to the increased thermal barrier effect.

• Membrane Journal
• /
• v.25 no.1
• /
• pp.75-83
• /
• 2015

In this study, chlorophylls were been extracted from common local plants, deposited on polypropylene (PP) substrate using various approaches, and the oxygen generation effect of the chlorophylls were investigated. The loading of chlorophylls on the substrates was achieved by dipping and spraying methods, where the spraying coating showed overall better results regarding oxygen generation from the combustion experiments in the closed vessel or in the isolated vacuum oven cell than those of dip coating. In addition, a composite substrate was prepared by nylon6/6 nanofiber on the PP substrate, and it exhibited an increase in the activation of chlorophylls. In the case of samples containing titanium dioxide ($TiO_2$), the reaching time of oxygen concentration from 16% to 21% and the combustion test using a candle for a sample with 50% chlorophylls showed similar results to those of a sample without $TiO_2$. As such, combining a spray coating and $TiO_2$ incorporation into gas separation membrane systems are expected to be useful to understand the fundamentals of material properties for their applications as oxygen generation membranes and air filtration systems.

• Journal of Environmental Health Sciences
• /
• v.44 no.4
• /
• pp.301-314
• /
• 2018

Objectives: The aim of this study was to introduce the overall progress of exposure assessment to humidifier disinfectant (HD); to present participants' demographic characteristics, exposure characteristics to humidifier disinfectant, and exposure classification; and furthermore to compare those characteristics between survivors and non-survivors. Methods: An assessment of environmental exposure to HD was conducted using modified HD-specific questionnaires that had been previously validated. We analyzed the data from 4,482 participants who had been potentially exposed to HD and had registered with the KEITI (Korea Environmental Industry & Technology Institute) from September 2016 to May 2018 (the fourth survey). Environmental exposure assessments were performed as follows: 1) contact with participants, 2) environmental exposure assessment though face-to-face interviews, 3) assessment review and coding, and 4) exposure rating. Results: Overall, survivors made up 77.1% (3,457 subjects) and non-survivors made up 22.9% (1,025 subjects). When compared with the survivors, non-survivors had a higher proportion of subjects aged >60 years and subjects who answered as suffering lung damage and having purchased HD because it is "Beneficial to health" (p<0.05). For the exposure characteristics compared to survivors, non-survivors had a higher proportion of cases of distance from humidifier to face being less that one meter and the spray direction being toward the face (p<0.05). Overall, respondents who used the "Oxy Ssak Ssak New Gaseupgi Dangbun", "Aekyung Gaseupgi Mate", "Homeplus Gaseupgi Chungjungje", and "E-Mart Gaseupgi Salgyunje" products made up 66.1, 12.3, 4.0, and 3.6%, respectively, and 72.5% of respondents used products with PHMG as the active chemical. When compared with survivors, non-survivors had a higher proportion of use of "Oxy Ssak Ssak New Gaseupgi Dangbun" but a lower proportion of use of products with CMIT/MIT, PGH, or PHMG as the active chemical. Conclusions: This study provided demographic characteristics and exposure assessment for applicants who have been injured by HD. In spite of the limitations of performing past exposure assessment through a questionnaire survey, such as recall bias, useful results may be obtained by comparing survivors with non-survivors. Further studies such as the exposure rating method and so on are necessary to assess past exposure to HD.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.3
• /
• pp.255-260
• /
• 2008

STATEMENT OF PROBLEM: Preparation of implant beds with lasers is considered a safe and reliable method, but the accuracy of this technique has not been examined. PURPOSE: The purpose of this study was to evaluate the accuracy and effectiveness of implant bed preparation using an Er,Cr:YSGG laser. MATERIAL AND METHODS: An Er,Cr:YSGG laser was applied to pig rib bone. The laser was employed at a 5.75 W power setting, 30 Hz/sec pulse repetition, and 70 ${\mu}s$ pulse duration with 50 % water and 60% air spray. According to laser tips the groups were divided as follows; Group 1: paralleled - shaped sapphire tip (0.6 mm${\Phi}$), Group 2: paralleled - shaped zirconia tip (0.6 mm${\Phi}$), Group 3: tapered sapphire tip (0.4 mm${\Phi}$). The Er,Cr:YSGG laser tip was separated by 1 mm from the bone and applied for 15 seconds in a non-contact mode. After the application, the bone was sectioned for specimens. Histologic measurements were determined by computerized morphometry. The length of the prepared bone surface was measured and the width of the entrance was measured. The results were analyzed with one-way ANOVA (P<0.05). RESULTS: The prepared length of group 3 was longer than that of group 2. The prepared bone width was larger than the width of the laser tip in every group. Additional bone removal was observed adjacent to the prepared area and displayed an irregular surface. CONCLUSION & DISCUSSION: Different cutting effects were observed according to the laser tip, emphasizing the importance of proper tip selection in the clinical setting. This preliminary study supported the existence of hydrokinetic effects.

• Journal of Yeungnam Medical Science
• /
• v.24 no.2
• /
• pp.162-169
• /
• 2007

Purpose : It is well known that suspension microlaryngeal surgery produces marked increases in arterial blood pressure and heart rate. In this study, we evaluated the effects of 10% lidocaine preoperatively sprayed for attenuation of the perioperative hemodynamic response during suspension microlaryngeal surgery. Materials and Methods : Fifty American Society of Anesthesiologists (ASA) class 1 patients scheduled for excision of a vocal polyp by suspension laryngoscopy were randomly divided into two groups (n=25 for each group). They were intubated without 10% lidocaine spray (control group) or given 1.5 mg/kg of 10% lidocaine sprayed onto the pharyngolaryngeal and intratracheal sites 90 sec prior to intubation (10% lidocaine group). Anesthesia was maintained using desflurane in $O_2/N_2O$ 50%. The arterial blood pressure and heart rate were measured at preinduction (T0), 1 min (T1), 3 min (T2), 5 min (T3) after tracheal intubation, and 1 min (T4), 3 min (T5), 5 min (T6) and 10 min (T7) after the suspension laryngoscopy. Results : In the 10% lidocaine group, the arterial blood pressure and heart rate at 1 (T1), 3 (T2) min after tracheal intubation and 1 (T4), and 3 (T5) min after suspension laryngoscopy were lower than the same measurements in the control group. Conclusion : 10% lidocaine sprayed onto the pharyngolaryngeal and intratracheal sites before intubation was an effective method for attenuation of the perioperative hemodynamic response during suspension microlaryngeal surgery.