• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.121-133
• /
• 2017

Since the mid 1990s, policies have been actively promoted to improve safety and pedestrian environment around the school such as the improvement of School zone. However, the prevention of accidents was not effective because it did not extend to the school road where the main transportation route for children's commuting takes place. In addition, due to the rapid increase of automobiles, trunk road traffic in the peak time bypasses the back roads, which threatens children's safety and the environment by invading the school area, which is the main living space of children. In this study, the characteristics of domestic children's traffic accidents were investigated and the problems were analyzed by conducting a field survey on Yeouido Secondary School in Seoul and Unjung Elementary School in Gyeonggi Province. In addition, Variable speed limit signs and Beacons were installed in the pedestrian road of comunity including School zone, and the effects of facilities on the speed of vehicles were analyzed. As a result of the analysis, the Variable speed limit sign showed a deceleration effect of about 8.3km/h, and the Beacon showed a phenomenon in which the traveling speed of 0.8km/h increased only slightly. In addition, the traffic violation rate of passenger cars, buses, and lorries decreased by about 3% as a result of investigating the number of traffic violation vehicles before and after installation.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.485-488
• /
• 2008

The structure supporting road sign is a road information facility for ensuring the safe transportation and smooth traffic. But, lots of road information facilities were damaged by the typhoon "Maemi" in 2003. Such damaged facilities should be rehabilitated and could increase economic loss by causing traffic accident. Therefore, in this study, behavior that reduce wind load and improve wind resistance of the structure supporting road sign are studied about wind load beyond design specification by abnormal climate as below. The first is wind load reducing technique such that shear key resist wind load that is not greater than design wind speed but in case that it is over the design wind limit, column member is rotated on the inner steel pipe axis by the brittle failure of shear key. The second is the technique such that fail-safe the overturning of road sign panel by equipment installation in the vertical member. The third is the technique of installing stiffening plate inside the vertical member to relieve stress concentration.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.443-446
• /
• 2002

A vehicle oversteered or cornering at excessive speed leaves tire yaw mark on the road surface. A yaw mark is a sign that the tire was sideslipping and exceeded its frictional limit because of centrifugal force. Problems exist with the traditional equation, “critical speed formula (CSF)”, that limits its practical use in traffic accident reconstruction. A major problem is that the equation dose not account for vehicle dynamics and interface between tire and road. The literature refers to that the accuracy of the critical speed formula varies with several factors. New equations that account for vehicle dynamics are introduced in this paper. A comparison of the accuracy of the new method and the traditional method in the calculation of speed is conducted.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.278-291
• /
• 2017

Effective installation and operations of traffic safety signs in the advance warning area is of considerable interest for safer traffic management at freeway work zones. This study evaluated the feasibility of traffic safety sign installation based on a driving simulation experiment to take drivers' responsive characteristics into consideration. Both the compliance rate for speed limit and a lane-changing safety index were used for evaluating a set of driving simulation scenarios. It was identified that providing speed limit signs to reduce speed in advance and afterward guiding lane-changing could lead to safer maneuvering of vehicles entering work zones. The outcomes of this study are expected to be useful for revising freeway work zone management policies toward crash prevention.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1574-1585
• /
• 2011

This paper proposes a real-time algorithm for speed limit sign recognition for advanced safety vehicle system. The proposed algorithm uses Block-DCT in extracting features from a given ROI(Region Of Interest) instead of using entire pixel values as in previous works. The proposed algorithm chooses parts of the DCT coefficients according to the proposed discriminant factor, uses correlation coefficients and variances among ROIs from training samples to reduce amount of arithmetic operations without performance degradation in classification process. The algorithm recognizes the speed limit signs using the information obtained during training process by calculating LDA and Mahalanobis Distance. To increase the hit rate of recognition, it uses accumulated classification results computed for a sequence of frames. Experimental results show that the hit rate of recognition for sequential frames reaches up to 100 %. When compared with previous works, numbers of multiply and add operations are reduced by 69.3 % and 67.9 %, respectively. Start after striking space key 2 times.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.123-129
• /
• 2017

This study deals with the traffic accident of truck at circular intersection. The purpose of this study is to develop the truck accident models based on type of accident and conflict. In pursuing the above, the study gives particular attentions to selecting the appropriate models among Poisson and Negative binomial models using statistical program LIMDEP 8.0. The traffic accident data from 2007 to 2014 are collected from TAAS data set of Road Traffic Authority. Such the dependent variable as number of truck accidents and the 24 independent variables as geometry, traffic volume and others are used. The main results are as follows. First, 5 Poisson models (${\rho}^2$ of 0.164~0.351) which are all statistically significant are selected. Second, the common variable based on type of accident and conflict is analyzed to be truck apron width. The specific variables are, however, evaluated to splitter island, area of splitter island, speed limit sign, truck apron, number approach road, circular intersection sign, speed hump and traffic volume. Finally, widening the truck apron width and improving the above specific variables are analyzed to be important for truck accident reduction at circular intersections.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.87-96
• /
• 2016

OBJECTIVES : A fog generated field test was conducted to analyze the relationship between different sizes of variable speed limit signs and the legibility distance under various fog density conditions. By using this study, appropriate sizes of signs can be selected depending on the density of fog. METHODS : An actual tunnel was selected as the area for this test, as other places cannot maintain the fog condition because of rapid air current. A total 121 subjects were recruited for this test, which took place over the course of four days. The test on the first day was conducted under normal weather conditions for comparison. Visibility-distance detecting sensor was used to measure the visibility distance due to the fog density time, simultaneously with the evaluation of legibility distance by subjects. RESULTS : The test results show the relationship between the different sizes of signs and the legibility distance corresponding to the visibility distance due to both non-fog and fog generated conditions. According to the technical test results, appreciable amount of reduction in legibility distance due to fog was resulted in all sizes of signs. Moreover, the legibility distance is reduced proportionately with the decrease in the visibility distance due to fog. CONCLUSIONS : The results of this study can be used to select appropriate sizes of valuable speed signs under fog conditions. Hence, drivers can expect to have more room to respond to adverse weather conditions, thereby reducing the risk of accidents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.65-76
• /
• 2018

This study aims to evaluate the legibility distances of variable speed limit sign(VSL) for different sizes, luminances, and fog conditions through a field experiment. For this, extensive fog simulated environment has been constructed, and legibility distances are tested and recorded among test subjects for different luminances and sizes of VSL in control. Results showed that legibility distance increased as the size of VSL increased in the given illumination conditions, but it was not an exact linear trend. The size was also an important factor for determining legibility distance as the fog density increased, especially heavy fog conditions. In addition, the legibility distance also increased as the given illumination levels of VSL improved.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.1
• /
• pp.47-51
• /
• 2006

Measuring the track geometry of a high-speed railway is the most important task in track construction and track maintenance work. Measuring accuracy is particularly sign the formulation of the maintenance plan and in the assessment of the work quality, and because it can set the train speed limit. To determine the track geometry of a high-speed railway, it is important to use KNR's track recording coach (EM-120). According to the result of the spectrum analysis, noise near the 1-m wave band was found on the track recording data. A new filter was thus applied to remove the noise from the track recording data. A similar result can be acquired when this method is used in real track geometry.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.3
• /
• pp.46-57
• /
• 2019

Generally speeding appeared to be the most contributing factor of fatalities occurred in work zones, and highway agencies in South Korea have concerned of the safety of workers and drivers in the poor circumstances. In this study, a portable variable message signs (PVMS) system as an alternative of control speeding in work zones was implemented. This study evaluated the safety effectiveness of the PVMS based on speeds and the compliance with the speed limit. Linear regression and logistic regression models were adopted to quantify the safety effect of the PVMS between the 'before' and 'after'. The results showed that most of points had statistically significant speeds reduction experience after PVMS installation. Also, the percentage of vehicle exceeding the speed limit by 10 km/h or more was decreased significantly between 50 and 80% in the 'after' periods compared to the 'before' periods. Therefore, the PVMS would be contributed to benefit safety in work zones which there is a difference in design speed of the adjacent normal section.