• Korean Journal of Plant Taxonomy
• /
• v.43 no.2
• /
• pp.128-138
• /
• 2013

The conservation status of an endemic perennial herb, Hanabusaya asiatica (Nakai) Nakai (Campanulaceae) was determined by applying the IUCN risk assessment criteria from our field study and available specimen data. Also, the GIS technology was used to develop a species distribution map to calculate the extent of occurrence (EOO) and area of occupancy (AOO) for the taxon. After two years of continuous field studies, 269 mature individuals were found in four localities in 2011, while 216 mature individuals were confirmed in three localities in 2012. Based on the following data, such as EOO (2,742 $km^2$), AOO (76 $km^2$) and estimated population size of mature individuals, the taxon, which is known as 20 localities in Korean peninsula, is evaluated as the category of Endangered (EN). A major difficulty in application of IUCN criteria to Korean rare plants were the lack of essential biological information and understanding the correct knowledge of the IUCN criteria in previous Korean studies. Sound conclusions regarding the conservation status of individual species require more intensive population studies, observations, and applying IUCN assessment procedures correctly.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.12
• /
• pp.1606-1611
• /
• 2000

Objective : To obtain more reliable sample in stereotactic biopsy, authors adopted proton chemical shift imaging ($^1H$-CSI)-directed biopsy. Until now, proton single voxel spectroscopy($^1H$-SVS) technique has been reported as a technique using metabolic information in stereotactic biopsy. The authors performed $^1H$-CSI with a stereotactic headframe in place and evaluated the pathologic results obtained from local metabolic information through $^1H$-CSI. Methods : $^1H$ CSI-directed stereotactic biopsy was performed in four patients. $^1H$-CSI and conventional Gd-enhancement stereotactic MRI was done simultaneously after application of the stereotatic frame. After reconstruction of metabolic maps of NAA/Cr, Cho/Cr, and Lactate/Cr ratios, the focal areas of increased Cho/Cr ratios and decreased NAA/Cr ratios were selected for target sites in the MR images Results : There was no difficulty in performing $^1H$-CSI with the stereotactic headframe in place. In pathologic examinations, the samples taken in area of increased Cho/Cr ratios and decreased NAA/Cr ratios showed the features of increased cellularity, mitoses and cellular atypism, thus facilitated the diagnosis. The pathologic samples taken from the area of increased Lactate/Cr ratios showed prominent feature of necrosis. Conclusion : $^1H$-CSI was feasible with stereotactic head frame in place. The final pathologic results obtained in our samples were concordant with the local metabolic informations from $^1H$-CSI. Authors believe that $^1H$ CSI-directed stereotactic biopsy may provide us advantages in obtaining more reliable tissue specimen in stereotactic biopsy.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.11 no.2
• /
• pp.29-39
• /
• 1989

Ossifying fibroma is a relatively slow growing tumor, and likely to have presented for some years before its clinical diognosis. The usually well circumscribed nature of ossifying fibroma in jaws lends itself to relative ease of excision and hence the favorable therapeutic results. On occasion, however, particulary in juvenile patient, if maxilla the tumor assumes an aggressive behavior. In that case, because the tumor grows invasively, resection with a margin of healthy tissue is indicated. The case presented is 34 - year old female. The patient had noticed a gradual swelling of the right side of the face approximately 2 months in duration correlation with a intermittent pain on the right maxillary molar area. Palpation disclosed firm swelling on the right anterior and lateral walls of the maxillary sinus extended to the maxillary tuberosity area. The radiographic examination revealed soft tissue mass with multiple dense round calcifications with destruction of anterior and posterolateral wall of the right maxillary sinus and right alveolar process, and hard palate. The mass totally obliterated maxillary sinus and extended to the pterygopalatine fossa. The histologic diagnosis from the biopsied specimen revealed ossifying fibroma. The tumor mass was resected by subtotal maxillectomy procedure due to a recent rapid infiltrative growth. In 5 months of postoperative follow - up period, the patient has favorable prognosis.

• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.321-326
• /
• 2012

Used as an ingredient in the hospital for orthopedic prosthetic stainless and titanium metal the same size as on the MRI diagnostic value of imaging were compared. Center of images, background high band portion of the video signal is converted into a weighted intensity values Normal images and compared. The area of normal slice and also the distortion of images and cross-sectional imaging of a range of quantitative and sagittal planes were compared. As a result, the periphery high band signal intensity values of Stainless video phantom 2, pig bone 1.8, Titanium imaging of phantom 1.7 has higher value than Normal video pig bone 1.3 times the signal strength rivers. MRI distortion of the shape and the distortions of the range, if the cross-sectional area compared to Normal Slice Stainless case of phantom 65.8 %, pig bone 61.5 %, Titanium distortion phantom 23.1 %, pig bone 38.5 % of the range of community found. In this experiment, as a result, MRI was found to be Titanium more diagnostic value than the specimen with respect to the signal intensity weighted value and low distortion range, Stainless.

• The Korean Journal of Zoology
• /
• v.34 no.2
• /
• pp.257-264
• /
• 1991

Studies on the geographical distribution and the seasonal prevalence of chigger mites, with particular reference to L. paflidum, a vector species of tsutsugamushi disease were carried out during the period of July 1989-October 1990. From total 111 field rodents collected during the study period, 4,498 chiggers were obtained and 12 species of 4 genera were identified. L. paflidum, the vector species was the dorninant species, showing 65.6% of the total chiggers. L. scutellare, known as the important vector species of tsutsugamushi disease in Japan was not found in the study area, except Yesan-gun, Chungcheong-namdo where only one specimen was collected. The distribution of chigger mites was clearly localized by species, showing the different dominant species by locality. The population density of L. paflidum was high at two study areas, moderate at one area and very low at six other areas, compared to the other species. The study on seasonal prevalence of L. paflidum population density resulted that they started appearing in September (9.8%), showed the peak in October (45.4%) and November (30.6%), almost disappeared during the period of December-March (1.3-0%), reappeared in April (12.7%) showing a small peak, and again almost disappeared until September. L. palpafe was appeared only in winter and spring (December-April).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.5
• /
• pp.434-444
• /
• 2006

This study was performed to evaluate the effects of three different implant surface treatments to the bone formation during osseous healing period under unloading conditions. Machined, double-acid etched and anodic oxidized implants were inserted into tibia of 3.0 - 3.5 kg NZ white male rabbits and 2 animals of each group were sacrificed at 2, 4 and 8 weeks. The specimens containing implant was dehydrated and embedded into hard methylmethacrylate plastic. After grinding to $50{\mu}m$, the specimens were stained with Villanueva bone stain. From each specimen, histomorphometric evaluation and the bone implant contact rate were analysed with optical microscope. The results were as follows; 1. In the scanning electronic microscopic examination, machined surface implant had several shallow and paralleled scratches on plain surface, double acid-etched implant had lots of minute wrinkles, rough valley and also irregularly located craters that looked like waves, anodic oxidized surface implant had porosity that minute holes were wholly distributed on the surface. 2. After 2 weeks of implantation, the percentages of bone-to-implant contact in the machined implant, double acid-etched implant and anodic oxidized implant were 26.85%, 62.64% and 59.82%, after 4 weeks of implantation they were 64.29%, 77.85% and 75.23%, and after 8 weeks they were 82.66%, 85.34% and 86.39%. 3. After 2 weeks of implantation, the percentages of bone area between threads in the machined implant, double acid-etched implant and anodic oxidized implant were 21.55%, 42.81%, and 40.33%, after 4 weeks of implantation they were 49.32%, 62.60% and 75.56%, and after 8 weeks they were 71.62%, 87.73% and 83.94%. In summary, percentages of implant surface contacted to bone trabeculae and bone formation area inside threads in double acid-etched implants and anodic oxidized implants were greater than machined implants in early healing stage. These results suggest that double acid-etched and anodic oxidized surface implants could reduce the healing period for osseointegration and may enable to do early function.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3736-3741
• /
• 2015

Crash impact test is conducted to verify the crashworthiness of fuel tank. Success of the crash impact test means the improvement of survivability of crews by preventing post-crash fire. But, there is a big risk of failure due to huge external load in the crash impact test. The failure of crash impact test can result in serious delay of a entire rotorcraft development because of the design complement and re-production of the test specimens requiring a long-term preparation. Thus, the numerical simulations of the crash impact test has been required at the early design stage to minimize the possibility of trial-and-error in the real test. Present study conducts on the numerical simulation of phase I crash impact test using SPH supported by crash simulation software, LS-DYNA. Test condition of MIL-DTL-27422 is reflected on analysis and material data is acquired by specimen test of fuel cell material. As a result, the crash load on the skin material, overlap area and metal fitting is estimated to confirm the possibility of acquisition of the design load for the determination of the overlap area and adhesive strength.

• Korean Journal of Heritage: History & Science
• /
• v.34
• /
• pp.222-267
• /
• 2001

The purpose of this document is to explain the revisions of the Protection of Cultural Properties Act and its sub-laws which have been mad from Jan. 1999 to Sep. 2001. The Protection of Cultural Properties Act and its sub-laws have been revised three times from 1999 to 2001, before and after the Office of Cultural Properties was raised to Cultural Properties Administration on May 24, 1999. The main points of the revisions are as follows. First of all, the role of the local autonomous entities has been increased. The governor of the local autonomous entities is entitled to announce administrative orders related to the preservation of State-designated Cultural Properties. Also, the local autonomous entities has the authorities to examine whether the construction work which will be made in the outer boundaries, which is provided by regulations, of the protected area of the cultural properties might have any effect on preservation of cultural properties or not. Second, preventive actions to protect the cultural properties have been strengthened. If the scale of construction work is more than some scale, the preliminary survey of the surface of the earth to confirm the existence of buried cultural properties and their distribution is obligated. One who is promoting the development plan more than some scale must discuss the plan with the Administrator of Cultural Properties Administration in the process of planning. These actions would be effective to prevent the cultural properties from being damaged because of the development. Third, relaxation of the restrictions has been proceeded. On the basis of regulations which specify the actions to affect the preservation of cultural properties, negative system that does not limit the actions which are not specified in the regulations is introduced. The appropriateness of both protected structure and area should be regularly reviewed and adjusted. Also, most of the restrictions which was made only for administrative convenience and over-regulated the people's living have been revised. Finally, the number of cultural properties to be protected has been increased. Besides the State-designated Cultural Properties, the other cultural properties which are worthy to be protected as City-or-Province-designated Cultural Properties can be designated provisionally and protected. The system of registration and maintenance of the buildings and facilities which are not designated as the Modern Cultural Heritages is established. The penalty for damaging and stealing the cultural Properties which are not designated to be protected was strengthened. Even a dead natural monument can be acknowledged as an natural monument and it is limited to make a specimen or stuffing of the dead natural monument. All of these actions are fit to the high level of understanding of the public about the cultural properties and as the result of these actions, the number of cultural properties to be preserved has been increased. To sum up, the directions of revisions of the Protection of Cultural Properties Act and its sub­laws which have been made from Jan. 1999 to Sep. 2001. are the localization of the protection of the cultural properties, the strengthening of protective actions, the relaxation of various regulations and the increasing of the number fo the protected cultural properties. Also, various problems raised in the processes of implementations of the laws have been reviewed and revised.

• Structural Engineering and Mechanics
• /
• v.70 no.1
• /
• pp.67-80
• /
• 2019

Strengthening with near surface mounted carbon fibre reinforced polymers (NSM-CFRP) is a strengthening technique that have been used for several decades to increase the load carrying capacity of reinforced concrete members. In Iraq, many concrete buildings and bridges were subjected to a wide range of damage as a result of the last war and many other events. Accordingly, there is a progressive increase in the strengthening of concrete structures, bridges in particular, by using CFRP strengthening techniques. Near-surface mounted carbon fibre polymer has been recently proved as a powerful strengthening technique in which the CFRP strips are sufficiently protected against external environmental conditions especially the high-temperature rates in Iraq. However, this technique has not been examined yet under repeated loading conditions such as traffic loads on bridge girders. The main objective of this research was to investigate the effectiveness of NSM-CFRP strips in reinforced concrete beams under repeated loads. Different parameters such as the number of strips, groove size, and two types of bonding materials (epoxy resin and cement-based adhesive) were considered. Fifteen NSM-CFRP strengthened beams were tested under concentrated monotonic and repeated loadings. Three beams were non-strengthened as reference specimens while the remaining were strengthened with NSM-CFRP strips and divided into three groups. Each group comprises two beams tested under monotonic loads and used as control for those tested under repeated loads in the same group. The experimental results are discussed in terms of load-deflection behavior up to failure, ductility factor, cumulative energy absorption, number of cycles to failure, and the mode of failure. The test results proved that strengthening with NSM-CFRP strips increased both the flexural strength and stiffness of the tested beams. An increase in load carrying capacity was obtained in a range of (1.47 to 4.49) times that for the non-strengthened specimens. Also, the increase in total area of CFRPs showed a slight increase in flexural capacity of (1.02) times the value of the control strengthened one tested under repeated loading. Increasing the total area of CFRP strips resulted in a reduction in ductility factor reached to (0.71) while the cumulative energy absorption increased by (1.22) times the values of the strengthened reference specimens tested under repeated loading. Moreover, the replacement of epoxy resin with cement-based adhesive as a bonding material exhibited higher ductility than specimen with epoxy resin tested under monotonic and repeated loading.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.434-439
• /
• 2020

Selective laser melting (SLM) manufactures an alloy using laser as a heat source, and has recently been introduced in the dental industry. However, there is a lack of analytical research on metal-ceramic restorations achieved by SLM. This study evaluates and compares the metal-ceramic bond strength of Co-Cr alloys produced by selective laser melting and casting methods. Co-Cr samples required for this study were produced through the sintering process of ceramics, by applying the SLM and CAST methods. The metal-ceramic bond strength was measured by applying the shear bond strength test. In order to determine the area fraction of adherent ceramic, Si content of the specimen was measured using scanning electron microscopy SEM/ EDS. Results of the metal-ceramic bond strength and AFAC were analyzed by t-test (α = 0.05). No significant difference was observed comparing the bond strength of SLM and CAST Co-Cr alloys (P> 0.05). However, the SLM group had much better ceramic adherence than the CAST group (P < 0.001). Moreover, oxidation characteristics were similar for both SLM and CAST Co-Cr alloys, but metal structures were different. These results imply that although the bond of ceramic and Co-Cr alloy is not related to the manufacturing method, SLM alloys impart better ceramic adherence. This indicates that alloys made with SLM can be used to fabricate upper implant prostheses in the future. In particular, it is expected to overcome the shortcomings of the CAST method, and save time and cost.