• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.171-178
• /
• 2017

The purpose of this study is to investigate the effect of number of times dipped in coloring liquid and sintering temperature on the flexural strength of zirconia ceramic. In this study, using a zirconia block having improved transparency, specimens with size of $25mm{\times}2mm{\times}1.5mm$ were fabricated. The zirconia ceramic specimens were divided into three groups according to the number of times dipped in coloring liquid by 0, 2 and 4 times, and dyed in the coloring liquid to give color to each specimen. Then, after sintering them at the final temperature of $1,450^{\circ}C$ and $1,600^{\circ}C$, flexural strength was measured using a universal testing machine (total 6 group, n=10 for each group). Also, a scanning electron microscopy (SEM) was performed to observe its microstructure, and the data obtained through the experiment were analyzed with two-way ANOVA. The results of the flexural strength analysis show that the highest value was measured $762.3{\pm}42.3MPa$ in EKL2 group, while the lowest value was $516.4{\pm}77.1MPa$ in EKH4 group. According to the results of the two-way ANOVAs, flexural strength was not related with interaction between sintering temperature and number of times dipped in coloring liquid ($R^2=0.737$). However, there were statistically significant differences in flexural strength depending on sintering temperature (P<0.001). The flexural strength of zirconia ceramics having improved transparency was dependent on sintering temperature. The number of times dipped in the coloring liquid did not affect flexural strength of the zirconia ceramic having improved transparency.

• Journal of agriculture & life science
• /
• v.44 no.6
• /
• pp.91-99
• /
• 2010

We used a multiplex PCR primer set composed of 11 microsatellite (MS) markers and two sexing markers for gender detection. Genomic DNA extracted from hair roots of 3,510 Hanwoo were genotyped. Based on the 11MS markers, no animals had identical genotypes(TGLA227, BM2113, TGLA53, ETF10, SPS115, TGLA122, ETH3, ETH225, BM1824 and INRA23). The expected probability of identity among genotypes of random individuals (PI), the probability of identity among genotypes from random half-sibs ($PI_{half-sibs}$) and among genotypes of random individuals, and the probability of identity among genotypes from random sibs ($PI_{sibs}$) were estimated as $1.31{\times}10^{-23}$, $2.52{\times}10^{-16}$and $1.09{\times}10^{-6}$, respectively using the API-CALC program, version 1.0. We successfully completed the genotype analysis of 3,510 Hanwoo with a 3.93% genotyping failure rate. It was revealed that extracting DNA from the hair root was a time-efficient and cost-effective method to collect specimens for DNA isolation from live animals. This method also minimized stress for the animals during specimen collection. Among the hair roots from the back, belly, upper tail and lower tail, 5~13 hair roots of the lower tail led to the best genotype analysis results. Finally, we established a 96-well-format method of DNA preparation applicable for high- throughput genotype analysis.

• Korean Journal of Plant Taxonomy
• /
• v.34 no.3
• /
• pp.221-244
• /
• 2004

Prunus sargentii complex of subgenus Cerasus is an Eastem Asiatic plant group that exhibits a broad range of morphological variation and includes P. takesimensis, P. yedosensis, P. verecunda, and P. sargentii. In this study, a morphological analysis was undertaken to determine whether the observed morphological variation was primarily attributable to morphological discontinuities among the taxa. P. sargentii, which distributed eastem area in Korea, northern area in Japan and far east Russia had umbel like inflorescence and additionally was characterized by sticky bud and leaf twigs, compared with P. serrulata complex. Also, P. verecunda in Korea and Japan was characterized by umbel like inflorescence and presence of hair in leaf, petiole and pedicel, and was treated as a variety of P. sargentii. Evidence obtained from multivariate morphometric analyses indicated that the entity of P. takesimensis formed a cohesive group somewhat distinct from P. sargenti.. Especially, P. takesimensis was characterized by relatively small flowers (26-32mm in diameter) and many flowers [(2)3-5] per umbel inflorescence, compared with P. sargentii (34-48mm and 2(3) per inflorescence) and should be recognized as an independent and endeImic taxon in Korea. Additionally, P. yedosensis, which was known to have umbel inflorescence (short peduncle type) with pubescent style based on the type specimen, was comprised of corymb inflorescence (long peduncle type) as well. The morphological differentiation between these two types of P. yedosensis was not considered sufficient to warrant recognition of specific status because of the putative hybrid origin, no distinctive geographical distribution pattern, and existence of various peduncle length on Island Jeju-do of Korea.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.210-215
• /
• 2021

For sterilization of microorganisms of the Listeria genus contaminating enoki mushroom, pilot mushroom grower equipped with air sterilization devices were developed. Sterilization experiments were performed using physical and chemical treatments. Internal temperature and humidity were controlled, maintaining 6.62℃±0.30 in the upper shelves, 6.46℃±0.24 in the middle shelves, and 6.48℃±0.25 in the lower shelves. Humidities were 79.97%±4.42, 79.43%±4.06, and 79.94±4.30%, respectively, with a temperature setting of 6.5℃, and a relative humidity of 75%. A suitable enoki mushroom cultivation stage for air sterilizer application was during the growth stage, with temperature in the 6.5~8.5℃ range, and humidity of 70~80%. At these same internal conditions, the ozone concentration in the mushroom cultivator was found to be 160 ppb during ion-cluster generator operation. After physical sterilization, the Listeria innocua survival rate was 0.1 to 0.9% using ion cluster sterilization, and 9.3 to 10.6% using UV air sterilization. The Listeria innocua survival rates on different materials were 9.3~10.6% on the metal specimen, and 9.9~16.2% on the plastic wrapper. The survival rate was particularly high on the rough side of the plastic wrapper. Ion cluster air sterilization is a labor-saving and effective method for suppressing the occurrence of Listeria bacteria on mushroom growers walls and shelves. For the plastic wrapper, chemical sterilization is more effective than physical sterilization.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.255-264
• /
• 2019

In this study, we conducted the hot box tests to compare the changes in thermal insulation for the four types of multi-layer thermal screens by the used period after collecting them from the greenhouses in the field when they were replaced at the end of their usage. The main materials for these four types of multi-layer thermal screens were matt georgette, non-woven fabrics, polyethylene (PE) foam, chemical cotton, etc. These materials were differently combined for each multi-layer thermal screen. We built specimens ($70{\times}70cm$) for each of these multi-layer thermal screens and measured the temperature descending rate, heat transmission coefficient, and thermal resistance for each specimen through the hot box tests. With regard to the material combinations of multi-layer thermal screens, thermal insulation can be increased by applying a multi-layered PE foam. However, it is considered that the multi-layered PE foam significantly less contributes to heat-retaining than chemical wool that forms an air-insulating layer inside multi-layer thermal screens. For the suitable heat-retaining performance of multi-layer thermal screens, basically, materials with the function of forming an air-insulating layer such as chemical cotton should be contained in multi-layer thermal screens. The temperature descending rate, heat transmission coefficient, and thermal resistance of multi-layer thermal screens were appropriately measured through the hot box tests designed in this study. However, in this study, we took into consideration only the four kinds of multi-layer thermal screens due to difficulties in collecting used multi-layer thermal screens. This is the results obtained with relatively few examples and it is the limit of this study. In the future, more cases should be investigated and supplemented through related research.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.2
• /
• pp.72-80
• /
• 2019

Purpose: The purpose of this study is to compare and analyze the shear bond strength and fracture pattern in different enamel tooth surface treatments for resin splinting materials. Materials and Methods: G-FIX and LightFix were used as tooth splinting materials. Twenty bovine mandibular incisors were used for the preparation of the specimens. The exposed enamel surface was separated into four parts. Each tooth was treated with 37% phosphoric acid, 37% phosphoric acid + adhesive resin, 37% phosphoric acid + G-premio bond, and G-premio bond for each fraction. Shear bond strength was measured using a universal testing machine. After measuring the shear bond strength, the fractured surface of the specimen was magnified with a microscope to observe the fracture pattern. Two-way ANOVA was used to verify the interaction between the material and the surface treatment method. One-way ANOVA was used for comparison between the surface treatment methods of each material and post-hoc test was conducted with Scheffe's test. An independent t-test was conducted to compare shear bond strengths between materials in each surface treatment method. All statistics were conducted at 95% significance level. Results: G-FIX, a tooth splinting resin, showed similar shear bonding strength when additional adhesive resins were used when material was applied after only acid etching, and LightFix showed the highest shear bonding strength when additional adhesive resins were used after the acid etching. In addition, both G-FIX and LightFix showed the lowest shear bond strength when only self-etching adhesive was applied without additional acid etching. Verification of interactions observed interconnection between resins and surface treatment methods. Most of the mixed failure was observed in all counties. Conclusion: When using G-FIX and LightFix, which are tooth-splinting materials, it is considered that sufficient adhesion will be achieved even after applying only acid etching as instructed by the manufacturer.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.127-133
• /
• 2019

Purpose: The purpose of present study was to investigate fracture strength and mode of failure of endodontically treated teeth restored with metal cast post-core system, prefabricated fiber post system, and newly introduced polyetherketoneketone (PEKK) post-core system. Materials and methods: A total of 21 mandibular premolar were randomly grouped into 3 groups of 7 each according to the post material. Group A was for metal cast post core; Group B for prefabricated glass fiber post and resin core; and Group C for milled PEKK post cores. All specimens were restored with metal crown. The fracture strength of each specimen was measured by applying a static load of 135-degree to the tooth at 2 mm/min crosshead speed using a universal testing machine. After the fracture strength measurement, the mode of failure was observed. The results were analyzed using Kruscal-Wallis test and post hoc Mann-Whitney U test at confidence interval ${\alpha}=.05$. Results: Fracture resistance of PEKK post core was lower than those of cast metal post and fiber reinforced post with composite resin core. In the aspect of fracture mode most of the root fracture occurred in the metal post core, whereas the post detachment occurred mainly in the fiber reinforced post. In the case of PEKK post core, teeth and post were fractured together. Conclusion: It is necessary to select appropriate materials of post for extensively damaged teeth restoration and clinical application of the PEKK post seems to require more research on improvement of strength.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.5
• /
• pp.399-415
• /
• 2021

This study was conducted to suggest the optimal periods for planting and felling Larix kaempferi tree by monitoring its cambial activity period. In addition, the heat summation to induce the cambial activity of Larix kaempferi was investigated. The study sites were at Mt. Worak and Mt. Midong. After selecting 5 trees at Mt. Worak and Mt. Midong, the cambium samples were collected using a mini trephor with 2 mm diameter from April 7 to October 6, 2017 at Mt. Worak, and from April 7 to September 29, 2017 at Mt. Midong. After the collected cambium samples were embedded in PEG2000, transverse thin sections with a thickness of 10 to 15 ㎛ were prepared using a microtome. One Larix kaempferi sample from each site, Mt. Worak and Mt. Midong, in which the accurate monitoring of cambial activity was impossible due to the formation of traumatic resin canal, was excluded from the study. The observation of the initiation date of cambial activity under a light microscopy revealed that 2 specimens from Mt. Worak and 3 from Mt. Midong showed the initiation on April 28. The remaining 2 specimens of Mt. Worak and 1 specimen of Mt. Midong were initiated on May 4, which was a week later than the others. The heat summation that induced the initiation of cambial activity was 196.4-271.8 at Mt. Worak and 204.7-277.3 at Mt. Midong, which was similar. The termination of cambial activity occurred between August 4 and 25 at Mt. Worak, and between August 4 and September 1 at Mt. Midong. Based on the above results, it was found that the optimal planting period for Larix kaempferi in Mt. Worak and Mt. Midong was before April, about a month before the cambium activity, and the felling period was from October when the cambial activity was completely terminated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.31-39
• /
• 2021

In this study, the fiber blending ratio and strain rate effect on the tensile properties synergy effect of hybrid fiber reinforced cement composite was evaluated. Hooked steel fiber(HSF) and smooth steel fiber(SSF) were used for reinforcing fiber. The fiber blending ratio of HSF+SSF were 1.5+0.5, 1.0+1.0 and 0.5+1.5vol.%. As a results, in the cement composite(HSF2.0) reinforced with HSF, as the strain rate increases, the tensile stress sharply decreased after the peak stress because of the decrease in the number of straightened pull-out fibers by increase of micro cracks in the matrix around HSF. When 0.5 vol.% of SSF was mixed, the micro cracks was effectively controlled at the static rate, but it was not effective in controlling micro cracks and improving the pull-out resistance of HSF at the high rate. On the other hand, the specimen(HSF1.0SSF1.0) in which 1.0vol.% HSF and 1.0vol.% SSF were mixed, each fibers controls against micro and macro cracks, and SSF improves the pull-out resistance of HSF effectively. Thus, the fiber blending effect of the strain capacity and energy absorption capacity was significantly increased at the high rate, and it showed the highest dynamic increase factor of the tensile strength, strain capacity and peak toughness. On the other hand, the incorporation of 1.5 vol.% SSF increases the number of fibers in the matrix and improves the pull-out resistance of HSF, resulting in the highest fiber blending effect of tensile strength and softening toughness. But as a low volume fraction of HSF which controlling macro crack, it was not effective for synergy of strain capacity and peak toughness.

• The Korean Society of Law and Medicine
• /
• v.23 no.3
• /
• pp.3-44
• /
• 2022

As a result of a close review focusing on the case of obstruction of epidemiological investigation by a religious group A in Daegu, which was a problem when the pandemic of Covid-19 infection began in Korea around February 2, 2020, when an epidemiological investigator requested a specific group to submit a list, While there have been cases where an act of not responding or submitting an edited omission list was sentenced to the effect that the act did not fall under an epidemiological investigation, in the case of non-submission of the visitor list for the B Center, even though a 'list of visitors' was requested. Regarding the fact of refusal without a justifiable reason, 'providing a list of persons entering the building is a key factual act that forms a link between epidemiological investigations accompanying an epidemiological investigation, and refusing to do so is also an act of refusal and obstruction of an epidemiological investigation. There are cases where it is possible to demand criminal punishment. Regardless of whether the request for submission of the membership list falls under the epidemiological investigation, there are cases in which the someones' actions correspond to the refusal or obstruction of the epidemiological investigation. A lower court ruling that if an epidemiological investigation is rejected or obstructed as a result of interfering with factual acts accompanying an epidemiological investigation, comprehensively considering whether or not the list has been diverted for purposes other than epidemiological investigation, the logic is persuasive. Epidemiological investigations such as surveys and human specimen collection and testing are conducted for each infectious disease patient or contact confirmed as a result of the epidemiological investigation, but epidemiological investigations conducted on individual individuals cannot exist independently of each other, and the This is because the process of identification and tracking is essential to an epidemiological investigation, and if someone intentionally interferes with or rejects the process of confirming this link, it will result in direct, realistic, and widespread interference with the epidemiological investigation. In this article, ① there are differences between an epidemiological investigation and a request for information provision under the Infectious Disease Control and Prevention Act, but there are areas that fall under the epidemiological investigation even in the case of a request for information, ② Considering the medical characteristics of COVID-19 and the continuity of the epidemiological investigation, the epidemiological investigator the fact that the act of requesting a list may fall under the epidemiological investigation, ③ that the offense of obstructing the epidemiological investigation in certain cases may constitute 'obstruction of Performance of Official Duties by Fraudulent Means', and ④ rejecting the request for information provision under the Infectious Disease Control and Prevention Act from September 29, 2020 In this case, it is intended to be helpful in the application of the Infectious Disease control and Prevention Act and the practical operation of epidemiological investigations in the future by pointing out the fact that a new punishment regulation of imprisonment or fine is being implemented.