• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.6
• /
• pp.530-537
• /
• 2015

The wet electrostatic precipitator (wet ESP) is an effective control device which removes submicron particles reentrained in a collection plate and water soluble gas. However, its collection efficiency decreases, as its operation is subject to water-induced distortion of the collection electrode. In order to make up for the limitation, we modified the wet ESP system by installing electrosprayed discharge electrodes. The modified wet ESP system can wash both the collection plate and discharge electrode. As a result, we were able to fabricate a compact wet ESP with a small specific collecting area ($0.18m^2(m^3/min)$) that can accomplish a high collection efficiency of fine particles (97.1%). In addition, the device obtained a relatively low specific corona power of approximately $10W/(m^3/min)$.

• Journal of The Korean Association of Information Education
• /
• v.21 no.1
• /
• pp.33-40
• /
• 2017

The purpose of this study is to compare the differences in academic achievement, department satisfaction, and department preference according to the entrance admission for the computer education of G National University of Education. As a result of collecting and analyzing, for three years, the academic achievement data of the students who have excelled in the specific area and regular entering students, it is found that the achievement of the students who excelled in the specific area is relatively higher. The results of the questionnaire survey showed that students who excel in specific areas were more satisfied with their departments than those who entered regularly. The reason for the high academic achievement and academic satisfaction of the students in the specific area seems to be the high loyalty to the department by the students who are interested in the computer. Therefore, it can be seen that it is necessary to consider how to select students for each enriched course at the entrance examination of education universities. In addition, as the era of the fourth industrial revolution comes, the number of students wishing to pursue computer education is expected to increase.

• Environmental Engineering Research
• /
• v.18 no.4
• /
• pp.229-234
• /
• 2013

This study aimed to develop a new dust collecting system equipped with an activated carbon (A.C.) coated electrode. Before fabrication, pre-treatment of A.C. was performed to remove metal ions within the A.C. to enlarge its specific surface area. Then, pre-treated A.C., black carbon, polyvinyl acetate (PVAc), and methanol were mixed to make a gel compound, which was coated onto aluminum plates to fabricate electrodes. The optimal mixing ratio of A.C., black carbon, PVAc, and methanol was found to be 10 g: 2 g: 3 g: 20 mL. After fabrication, the electrodes were used in the batch-type experiment for $NH_3$ and $H_2S$ removal. The reduction rates of the gases were high at the beginning and slowly reduced with time. Dust collection experiments were conducted in continuous flow, with various voltages applied. Compared to 5 kV, dust removal efficiency was 1.5 times higher when 10 kV was applied. Increasing the number of electrodes applied also increased the collecting efficiency. The correlation coefficient between actual collecting efficiency and trend line was higher than 99%. Consequently, the novel dust collection system equipped with A.C. coated electrode appears to be a promising substitute for existing dust-control devices.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.11
• /
• pp.193-201
• /
• 2018

In this paper, we extracted relevant patent data and conducted statistical analysis to understand the technical development trend related to Wireless Power Transfer (WPT) for Light Rail Transit (LRT). Recently, with the development of WPT technologies, the Light Rail Transit (LRT) industry is concentrating on applying WPT to the power supply system of trains because of their advantages compared wired counterpart, such as low maintenance cost and high stability. This technology is divided into three areas: wireless feeding and collecting technology, high-frequency power converter technology and orbital and infrastructure technology. From each specific area, key words in patent document were extracted by TF-IDF method and analyzed by social network. In the keyword network, core word of each specific technology were extracted according to their degree centrality. Then, the multi-word phrases were also built to represent the concept of core technologies. Finally, based on the analysis results, the development strategies for each specifics technical area of WPT in LRT filed will be provided.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.78-82
• /
• 2010

The feeder pipe of Main Primary Heat Transfer System in Wolsong Nuclear Power Plant was inspected by the Ultrasonic Phase Array technique in 2010. It is the first time to apply this method to the construction at Nuclear Power Plant in Korea. The time required for UT technique is less than RT method. The UT method doesn't need to evacuate personnel who works nearby inspecting area and doesn't need to wait developing of film. For these reasons, the UT method is the fastest method among the volumetric inspections. As a result of the examination, it became clear that main defect of the feeder pipe is the Lack of fusion in the welded area. Moreover, the rate of defect was reduced gradually as improvement of welder's skill. If welding machine has problem, the defect has tended to same pattern(occurred same position in the welding area) but these defects were founded without specific rules. For these reasons, the creation of defect is dependent on the skill of worker not on the automatic welding machine. This evaluation of defect signal and collecting data would be useful to further examination in ISI.

• The Journal of the Korea Contents Association
• /
• v.19 no.9
• /
• pp.476-484
• /
• 2019

RFID yoking proof proves that a pair of tags is scanned at the same time. Since the tags scanned simultaneously by a single reader are adjacent to each other, the yoking proof is used in applications that need to check the physical proximity of tagged objects. Most of the yoking proof schemes require pre-knowledge on adjacent tags. If an error occurs in the process of collecting information about adjacent tags, all subsequent proofs will fail verification. However, there is no research that suggests specific methods for obtaining information about adjacent tags. In this study, I propose a tag proximity information acquisition scheme for a yoking proof. The proposed method consists of two steps: scanning area determination and scanning area verification. In the first step, the size and position of the area to scan tags is determined in consideration of position and transmission range of the tags. In the next step, whether tag scanning is performed within the scanning area or not is verified through reference tags of the fixed position. In analysis, I show that the determined scanning area assures acquisition of adjacent tag information and the scanning area verification detects deformation and deviation of the scanning area.

• Journal of the Korean Institute of Rural Architecture
• /
• v.12 no.1
• /
• pp.25-32
• /
• 2010

The aim of this thesis is to present why the business district of old downtown in Jejusi collapsed and what sort of problems caused by that as collecting objective data, which help us to comprehend how the commercial zone has been decaying, on the physical state of the specific area near 'Sinheungro' and 'Chilsungro', which are main commercial sites in the downtown, and analysing it. Firstly It was revealed that most land investigated was property in which structure was able to built or poor land within $60m^2$. This was caused by increasing in land value and high density in space use so that the area did not develop. Secondly, In addition to be low density, most of buildings in 'Sinheungro' and 'Chilsungro' were so old and inefficient - the old buildings were abandoned without improving due to expensive rent and complicated property rights. Thirdly, According to the survey accomplished, major commercial facilities in the area have struggled with the continuous recession in their business. It was the inevitable result of not having an effective alliance with surrounding retail shops and a lack of a strategic action for satisfying consumers desire or adapting to new shopping patterns. Fourthly, Infrastructure in the site was ruining the beauty of the urban landscape as well as bringing on bad access to the inner city as not having improved enough. Furthermore, many administration departments which were in charge of each infrastructure existed. This was resulted from not considering unification between each infrastructure and regional characteristics of the local community.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.5
• /
• pp.107-114
• /
• 2004

In this paper, we present the architecture design of CDMA/TDMA modem chipset for wireless telemetry system. The wireless telemetry system a measuring data collecting system from many RTs(Remote Terminal) installed at the specific area using wireless communication technology. It consists of CU single CU (Central Unit) for collecting data and a large amount of RTs for transmitting the measuring data. We propose the hardware architecture of the modem for RT and CU. We also design those modem using Verilog HDL and synthesis them using Synopsys$^{TM}$ CAD tool. The modem of RT is implemented with 27K gates and that of CU is implemented around 220k gates using 0.6${\mu}{\textrm}{m}$ CMOS standard cell. The proposed system is implemented and tested using Altera$^{TM}$ FPGA.PGA.

• Korean Institute of Interior Design Journal
• /
• v.25 no.3
• /
• pp.102-111
• /
• 2016

There are various form of public elements in modern urban space. These public elements mingle with sociocultural elements which consist of each city, determining urban environment's image. Especially, since the social value of design becomes important, the social role of public design has been emphasized as an effective value for public interest and environment. It is just about 10 years since design mind in the public sector has been made domestically. Even though domestic public design has been studied not so long, it has developed with radical change of social culture and science technology. This study targets public environment in modern dense urban space. Also, it grasps the trend of public design studies through analysing and documentary survey of the existing studies, and based on that result, aims at presenting the direction that domestic public design studies should progress. This study selected 253 theses(1989.6~2015.11) by collecting primary, secondary data about public design studies, and implemented overall meta-analysing about the trend of domestic public design studies. As a result, public design has been studied intensively in the field of design about environment, architecture, etc. The trend analyzing of study purpose and keyword has a tendency which is weighted towards exploratory study focused on suggestion and development about object and realm of public design. The trend analyzing of study area tends to study overall part of public space or public facility rather than specific area and object. The most parts of studies analyze domestic area, especially Seoul metropolitan area. Also, the study method weighted in favor of some qualitative analysis has been utilized.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.10
• /
• pp.753-762
• /
• 2019

It is very important to use the raw material in a particular field of research or education. Research without raw materials are difficult to prove and often remain hypothesis. The use of the raw material is also important in area studies that study specific areas. However, research of area studies, especially Western history, raw material and historical archives are very important data, but it is difficult to obtain and refer to these data due to physical or spatial constraints. In order to solve this problem, there is a method of collecting and providing historical archives, but it is currently difficult to find a case of providing overseas historical archives as a web system in Korea. Accordingly, in this paper proposes the necessity of collecting historical archives, the method of collection, and the method of digital archiving of collected data structurally and systematically. In this regard, investigate the existing research cases on the archive system and database design, and it description the differentiation between the existing systems and the modeling method proposed in this study. Also, to improve the efficiency of the search, it proposes a method of adding a tag table when database modeling.