• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.6
• /
• pp.330-335
• /
• 2001

Flake graphite cast irons with the high damping capacity have been used for the control of vibration and noise occurring in the members of various mechanical structures under vibrating conditions. However, the damping capacity which Is morphological characteristics of graphite is one of the important factors in reducing the vibration and noise, but hardly any work has deal with this problem. Therefore, the authors have examined the damping capacity of various cast irons with alloying elements and studied the influences of the matrix structures, mechanical properties and morphological characteristics of graphite. The main results obtained are as follows: Effects of Sb on the damping capacities and mechanical properties have been investigated in 3.6%C-0.2%Ni gray cast iron. At 0.02%Sb, specific damping capacity showed the maximum value, and decreased with further increase in Sb content. Mechanical properties showed opposite trend with the damping capacity. And then, effects of Ti on the damping capacities and mechanical properties have been investigated in 3.6%C-0.2%Ni-0.02%Sb gray cast iron. Specific damping capacity increased with increase in Ti content. Graphite length also showed same behavior. Tensile strength increased with Ti content due to refinement of pearlite. In the case of 0.14%Ti addition in 3.6%C-0.2%Ni-0.02%Sb cast iron, specific damping capacity and tensile strength was 36% and 25 $kgf/mm^2$ which are higher than 32% and 15 $kgf/mm^2$ at 3.6%C-0.2%Ni cast iron respectively.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2835-2838
• /
• 2003

We study the characteristics of oscillating in non-autonomous condition and the conducted noise generation in a RL-photocoupler circuit. This circuit may be shown a period-doubling and a chaos dynamics under any specific conditions of input circuit. But, the relationship between input signals and output signals is different according to the amplitude of driving input voltage. Then, the oscillation noise was analyzed with respect to both the frequency and the amplitude of an external ac signal and do values. The results show that the noise-induced oscillations for falling and rising cycles induced by kick-back effect in an inductor, nonlinear capacitance, nonlinear resistance and charge storage time in a diode and an LED. We also compared the simulation with the experimental results.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.563-566
• /
• 2003

Quality measures play an important role in the field of image processing. Such measures are commonly used to assess the performance of different algorithms that are designed to perform a specific image processing task. In this paper we propose two novel measures for image quality assessment based on the notion of correlation between fuzzy sets. Two different definitions fur the correlation between fuzzy sets have been used. In order to calculate the proposed quality measures two approaches were evaluated, one with direct application of the measures to the image′s pixels and the other using the fuzzy set corresponding to the normalized histogram of the image. A comparative study of the proposed measures is performed by investigating their behavior using images with different types of distortions, such as impulsive "salt at pepper" noise, additive white Gaussian noise, multiplicative speckle noise, blurring, gamma distortion, and JPEG compression.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1288-1292
• /
• 2007

Mobile phone is necessary articles by increasing mobile communication now. People usually use the Mobile phone in any time and place. Ring tone of Mobile phone effect owner or other person. The sound level of Mobile phone ring tone could be considered as noise if it is too loud a specific situation. Manufacturing company improve ring tone of mobile phone better in consumer's perception. In this study, we record ring tone of mobile phone and estimated the complexity and nonlinear characteristics of the relation between subjective evaluation and sound metrics. Linear regression models were obtained for the subjective evaluation and sound quality metrics. Semantic Differential Method is used to study sound quality Evaluation. To analyze the sound quality of ring tone.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.291-296
• /
• 1998

In the experiment carried out on 20 college students, recorded were frontal, temporal and occipital EEG, skin conductance response, skin conductance level, heart rate and respiration rate during listening to two music fragments with different affective valences and white noise administered immediately after negative visual stimulation. Analysis of physiological patterns observed during the experiment suggests that affective auditory stimulation with music is able to selectively modulate autonomic and cortical activity evoked by preceding aversive visual stimulation and to restore initial baseline levels. On other hand, physiological responses to white noise, which does not possess emotion-eliciting capabilities, evokes response typical for orienting reaction after the onset of a stimulus and is rapidly followed by habituation. Observed responses to white noise were similar to those specific to attention only and had no evidence for any emotion-related processes. Interpretation of the obtained data is considered in terms of the role of emotional and orienting significance of stimuli, dependence of effects on the background physiological activation level and time courses of attention and emotion processes. Physiological parameters are summarized with regard to their potential utility in differentiation of psychological processes induced by auditory stimuli.

• Nuclear Engineering and Technology
• /
• v.31 no.2
• /
• pp.226-235
• /
• 1999

Applying digital network technology for advanced nuclear plant requires deterministic communication for tight safety requirements, timely and reliable data delivery for operation-critical and mission-critical characteristics of nuclear plant. Communication protocols, such as IEEE 802/4 Token Bus, IEEE 802/5 Token Ring, FDDI, and ARCnet, which have deterministic communication capability are partially applied to several nuclear power plants. Although digital communication technologies have many advantages, it is necessary to consider the noise immunity from electromagnetic interference (EMI), electrical interference, impulse noise, and heat noise before selecting specific digital network technology for nuclear plant. In this paper, we consider the token frame loss and data frame loss rate due to the link error event, frame size, and link data rate in different protocols, and evaluate the possibility of failure to meet the hard real-time requirement in nuclear plant.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.469-473
• /
• 2007

For the quantitative analysis of inclusion using OES data, separating of noise and inclusion is needed. In previous methods assuming that noises come from a normal distribution, intensity levels beyond a specific threshold are determined as inclusions. However, it is not possible to classify inclusions in low intensity region using this method, even though every inclusion is an element of some chemical compound. In this paper, we assume that distribution of OES data is a Gaussian mixture and estimate the parameters of the mixture model using EM algorithm. Then, we calculate mixing ratio of noise and inclusion using these parameters to separate noise and inclusion.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.628-631
• /
• 2005

In this paper, we propose tuning method of PID-PD controller to satisfy design specifications in frequency domain as well as time domain. The proposed tuning method of PID-PD controller that consist of the convex set of PID and PI-PD controller controls the closed-loop response to locate between the step responses, and Bode magnitudes of closed-loop transfer functions controlled by PID and PI-PD controller. The controller is designed by the optimum tuning method to minimize the proposed specific cost function subject to sensor noise insensitivity and robust stability. Its effectiveness is examined by the case study and analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.3
• /
• pp.78-84
• /
• 1994

The location of periodic noises in phase of AC power wave reveals to be specific according to the noise kinds which can be generally classified into modulation and baseband types in DLC. The former noise type has constant noise phase which is originated from switching mode power supplies and the latter normally caused from thyristor circuit of low switching frequency is compared to be more dispersive than the other.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.137-142
• /
• 2004

The aim of this study is to investigate the characteristics and quantity of the noise reduction by floor coverings. The characteristics on the reduction of the lightweight impact sound level by floor coverings is as follows. The insulation level attained by floor coverings tends to be smaller in actual buildings than in public laboratories. The reduction of the impact sound level to the tape is similar to the method of adhesives. For this reason, the reduction of impact sound level by floor coverings in public laboratories can be utilized to tape. And the reduction of impact sound level by floor coverings is not influenced by the size of specimen except the specific frequency.