• Journal of Veterinary Clinics
• /
• v.21 no.4
• /
• pp.402-405
• /
• 2004

A 5-year-old Rottweiler neutered female dog was presented with signs of mandibular and popliteal lymphadenopathy, erosion in mucocutaneous junction of muzzle and lips, multiple papules and nodules in right rear limb and neck, and alopecia in right thorax. There was no further clinical sign except anorexia, sporadic fever and ocular hyperemia. She hadn't shown any response to carprofen prescribed by local veterinarian. Hematological abnormalities included mild anemia and severe lymphocytosis. On serum biochemical profile, only elevated AST level was noticed. On cytological examination, there was an evidence of mild bacterial infection which seemed to occur secondarily. Three sites were biopsied that included muzzle, upper lip and right thoracic region. Histopathologically, multifocal confluent pyogranulomatous dermatitis, scattered granulomatous inflammation in subcutis and severe septal panniculitis were observed. Special stainings(Gram, Acid-fast, PAS, Giemsa) were performed to reveal that a dog was negative for any organism. Finally, sterile pyogranuloma/granuloma syndrome (SPGS) was diagnosed. The treatment was initiated with predinsolone and enrofloxacin. The condition was successfully resolved after 4 weeks of treatment. This good response suggests that SPGS may be immune-mediated disease of its pathogenesis and this drug combination may be a viable therapeutic option for dogs suffering from SPGS. Also, this article reports a case of SPGS in Rottweiller for the first time.

• Journal of Korean Medical classics
• /
• v.25 no.1
• /
• pp.89-115
• /
• 2012

Objective : Blood disease is common these days due to modern man's excessiveness in Yang heat (陽熱) and vulnerability of the Eum blood(陰血). This exposes them to warmheat/ dampness-heat diseases, where pathogenic heat easily penetrates the blood dimension(血分) creating stagnated blood(瘀血). Consequently, pathogenic symptoms in the collateral vessels increase, making it crucial to understand the pathogenic mechanism of the disease. Method : This paper examines the condition and region of the collateral vessel diseases(CVD) according to the blood diseases of Onbyeong, by analyzing each prescription's matching symptom. The disease in question in this paper is 'stagnated blood fixated in the collateral vessels'. Therefore diseases with stagnated blood in the Yang collaterals and Viscera collaterals or viscera themselves from the chapter of "On-Yeok-Ron(溫疫論)", and < Dry Blood-DaeWhangJaChungWhan(大黃蟅蟲丸) > chapter of "Geum-Gue-Yo-Rak(金匱要略)", were examined respectively. Result & Conclusion : The process of CVD according to the blood diseases of Onbyeong can be summarized as follows. First, bleeding in the Yang and Bowel collaterals, then stagnation in the Yang and Bowel collaterals, and finally stagnation in the viscera collaterals or Liver itself. The refractory nature of blood stagnation symptoms of the collateral vessels is mainly due to the characteristics of the collateral vessel itself. In structure, they are very narrow and small, situated at the most terminal part of the body where it is difficult for the Jeong Gi(精氣) to reach. Also, as they are symptomatic of degeneration of Jeong Gi, the root of the disease is very deep. Therefore to resolve blood stagnation in the cases of Ju-Gaek-Gyo and Dry Blood, general approaches using 'Gi communication(行氣)' or 'Blood vitalizing(活血)' medicinals will not suffice. Special medicinals such as crustacean and insects need to be appropriately applied.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.5-6
• /
• 2002

The new spectrometer for X-ray Induced Electron Emission Spectroscopy (XIEES) .has been recently developed in KRISS in collaboration with PTI (Russia). The spectrometer allows to perform research using the XAFS, SXAFS, XANES techniques (D.C.Koningsberger and R.Prins, 1988) as well as the number of techniques from XIEES field(L.A.Bakaleinikov et all, 1992). The experiments may be carried out with registration of transmitted through the sample x-rays (to investigate bulk samples) or/and total electron yield (TEY) from the sample surface that gives the high (down to several atomic mono-layers in soft x-ray region) near surface sensitivity. The combination of these methods together give the possibility to obtain a quantitative information on elemental composition, chemical state, atomic structure for powder samples and solids, including non-crystalline materials (the long range order is not required). The optical design of spectrometer is made according to Johannesson true focusing schematics and presented on the Fig.1. Five stepping motors are used to maintain the focusing condition during the photon energy scan (crystal angle, crystal position along rail, sample goniometer rail angle, sample goniometer position along rail and sample goniometer angle relatively of rail). All movements can be done independently and simultaneously that speeds up the setting of photon energy and allows the using of crystals with different Rowland radil. At present six curved crystals with different d-values and one flat synthetic multilayer are installed on revolver-type monochromator. This arrangement allows the wide range of x-rays from 100 eV up to 25 keV to be obtained. Another 4 stepping motors set exit slit width, sample angle, channeltron position and x-ray detector position. The differential pumping allows to unite vacuum chambers of spectrometer and x-ray generator avoiding the absorption of soft x-rays on Be foil of a window and in atmosphere. Another feature of vacuum system is separation of walls of vacuum chamber (which are deformed by the atmospheric pressure) from optical elements of spectrometer. This warrantees that the optical elements are precisely positioned. The detecting system of the spectrometer consists of two proportional counters, one scintillating detector and one channeltron detector. First proportional counter can be used as I/sub 0/-detector in transmission mode or by measuring the fluorescence from exit slit edge. The last installation can be used to measure the reference data (that is necessary in XANES measurements), in this case the reference sample is installed on slit knife edge. The second proportional counter measures the intensity of x-rays transmitted through the sample. The scintillating detector is used in the same way but on the air for the hard x-rays and for alignment purposes. Total electron yield from the sample is measured by channeltron. The spectrometer is fully controlled by special software that gives the high flexibility and reliability in carrying out of the experiments. Fig.2 and fig.3 present the typical XAFS spectra measured with spectrometer.

• Korean Journal of Environment and Ecology
• /
• v.32 no.4
• /
• pp.355-372
• /
• 2018

The purpose of this study was to investigate the distribution of vascular plants in Mt. Daedeukbong. The study is significant because surveying the flora of old-growth forest in Mt. Daedeukbong is a way of understanding what kind of plant species exist in DMZ as the geographical characteristics of Mt. Daedeukbong adjacent to Korean DMZ have the role of a buffer zone connecting the DMZ and its southern region. We collected the vascular plants 7 times from May 2015 to May 2017 and found a total of 393 taxa consisting of 84 families, 245 genera, 341 species, 4 subspecies, 43 varieties and 5 forms. The observed rare plant species as designated by Korea Forest Service were 8 taxa, and the endemic species were 6 taxa. 44 taxa were listed as specific plant species based on phytogeographical in the investigated area. 23 taxa were recorded as naturalized plants, and the naturalized rate and urban index were 5.3% and 8.7%, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.747-757
• /
• 2017

Of safety check regulation, 'Construction Technology Promotion Act' and 'Special Act on the Safety Control of Public Structures' contain provisions about the content of safety in construction works and the items of safety checks in the maintenance aspect and thus contribute to accident prevention in the construction industry. Of the regulations responsible for the practical safety of workers, the safety check regulation of Ministry of Employment and Labor demand for safety check from the start of construction based on an agreement with a concerned agency to the completion of construction solely based on 'Guidance Standards for the Specialized Disaster Prevention Instruction in Article 32 of Occupational Safety and Health Act' and 'Appropriation and Usage Standards of Safety and Health Management Costs in the Construction Industry'. There is, however, a huge gap, as well, in them according to client agencies. In small construction sites ordered by a private organization, checks are done formally with no detailed regulations. As a result, the costs of checks continue to drop with only the contract kept intact. This study examined the forms of safety checks practically done in the Jeju region, distinguished and compared them by the construction costs, calculated proper costs based on each construction act, and further proposed improvement measures for the detailed regulations.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.1
• /
• pp.5-13
• /
• 2003

The purpose of this study is to determine the value of serum concentration of C-reactive protein(CRP) in comparison with ESR and leukocyte as the tools for diagnosis and follow-up study of infection. For this study, thirty-one patients with head and neck infection and thirty-two patients performed the orthognathic surgery were selected for experimental and control groups each other. we analyzed the blood sample daily to measure CRP, ESR and leukocytosis. The results of this study are as the following : 1. Serum C-Reactive Protein levels in the experimental group were higher than control group and the pattern of CRP changes continued to decline in both groups(P<0.001). 2. ESR changes in both groups were scattered without any special pattern. 3. Correlation between CRP and Leukocyte was higher than others(r=0.664, P<0.01). 4. In the Receiver Operating Characteristic(ROC) Curve of experimental group, rapid increase of CRP curve and Area under the curve(AUC) value, 0.774, indicate the high accuracy of estimation. 5. In experimental group, sensitivity of CRP, ESR, and Leukocytosis on recovery day were 83%, 17% and 71%. Based on the results of this study, we could conclude that determination of CRP is more useful method to diagnosis and follow-up study of infection than other commonly used variables in oral and maxillofacial region.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.200-205
• /
• 2016

A drug transport carrier could be used for safe send of drugs to the affected region in a human body. The chitosan is adequate for the drug delivery carrier because of adaptable to living body. The gold, a metallic nanoparticles, tends to form a nano complex at rapidly when it combined with chitosan because of its negative charge. having energy from the other, outer gold nano-complex make heat due to its property to release the contained drugs to the target area. Silver could be also formed an useful biocompatible nano-composites with chitosan which should be used as an useful drug transfer carrier because its special ability to protect microbial contamination. Being one of the oxidized nano metals, $Fe_3O_4$ is nontoxic and has been used for its magnetic characteristics. In this study, the control of catalyst, reducing agent, and solvent amount. The chitosan-$Fe_3O_4$-gold & silver nanoshell have been changed to form about 100 nm size by ionic bond between the amine group, an end group of chitosan, and the metal. It was observed the change in order to seek for its optimum reaction condition as a drug transfer carrier.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.135-154
• /
• 1997

The purpose of this study is to clarify the reason of the change of production-and-marketing system and of the regional division. The data for this study were collected by administering interviews with people engaging in hemp fabric industry: namely, craftsmen and managers in the production and marketing of "hemp fabric" handcraft. The summary of this study is as follows: First, the hemp fabric industry is a main subsidiary business of agriculture in Andong. The process of making hemp fabric heavily depends on manual labor. The process is divided into five stages: namely, cultivating hemp, pre-reeling, reeling, weaving, and colouring. Second, Andong "hemp fabric" handicrafts industry had been continuously growth until the late 1960s. During the period of Japan colonization, it was under boom condition: while the other traditional fabric industries were declined. In the 1970s, the decrease of the demand of hemp fabric was the result of mass production of substitute goods on factory system: while, in the 1980s, the growth of per capital income play an important role in bringing about the increased demand of hemp fabric. Third, in the 1980s. production-and-marketing system was changed as the result of the effort to improve the quality and the process, the advanced age of craftsmen, and the weak function of existing marketing systems. The social division of labor within the district is well developed between cultivating hemp, reeling and weaving. The social division of labor is also found in the partly process of handcratfs, and between the production and marketing. The social division of labor between production and marketing is not strongly developed to establish a reliable enterprise that develops a new product and opens a new market. Fourth, the spatial boundary of the production of hemp fabric handcrafts becomes limited into a special region based on the regional specialization of hemp cultivating and the differentiation of utilization of labor.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.1
• /
• pp.51-64
• /
• 2002

To investigate long-period wave responses in Sokcho Harbor and Cheongcho lagoon, field measurements were made for long-and short-period waves and current velocities using a Directional Waverider, a ultrasonic-type wave gauge, four pressure-type wave gauges, and a current meter. From the data analysis, it was found that the Helmholtz resonant periods of Sokcho Harbor and Cheongcho lagoon are about 13.6 and 54.5 minutes, respectively, and the dominant period of wave induced current in the passage between Sokcho Harbor and Cheongcho lagoon is about 55.2 minutes which depends on Helmholtz resonant condition of the Cheongcho lagoon. It was also found that the energy level of the far-infra-gravity waves during storm conditions is very high compared with that during calm sea conditions. To investigate relationships between far-infra-gravity waves and short-period waves at offshore station, regression analyses were carried out especially for 1) heights, 2) periods, 3) direction and height, 4) height and period between short-and far-infra-gravity waves, respectively. The results showed that the long-period wave height is highly correlated with the short-period wave height. However, no special trend was found for the other relations. In the future far-infra-gravity wave heights on return period around Sokcho Harbor region can be suggested by using extreme value analyses of long term measured data.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.10a
• /
• pp.266-287
• /
• 1998

Environmental conditions and expected profit are the major criteria to select crops to be cultivated in any region. Traditionally, miscellaneous crops have been cultivated as alternative crop in case of unfavorable climate or supplementary crop in marginal lands. Since the successful breeding of high yielding varieties of staple crops and development of cultural techniques in 1970s in Korea, production of miscellaneous crops decreased markedly due to the rapid commercialization of agriculture and increased productions of horticultural crops, although yields have been doubled during the last $2\~3$ decades. On the other hand, animal husbandry has been developing remarkably parallel with national economic development and the increased consumption of animal products. As a result, imports of feed grains such as corn have increased rapidly, while roughage production became lower than demand. Among miscellaneous crops, corn production increased markedly through the development of hybrids and due to its importance as silage crops. Acreage of corn production including grains, fresh corns and feeding is about 120,000 ha, while acreage of buckwheat is about 5,000 ha and those of other miscellaneous crops decreased to a level of about 1,000 ha. Although miscellaneous crops have low yield potential and are unprofitable due to low price and imports of cheap foreign products, they should be kept to cultivate. Miscellaneous crops are important components that maintain diversity among upland crops as well as alternative crops in case of unfavorable climate. The low yield potential of miscellaneous crops might be due to lack of efforts to breed high yielding varieties and to develope cultural techniques. Continuous investment in research, exploitation of new utilization for miscellaneous crops as sustainable crop, honey crop and sightseeing crop, and development of healthy and special foods will promote their cultivation. Animal feeding in Korea depends mainly on formula feeds. As the number of animals increases to meet demand of animal products, there is no alternative way but to import grains to feed them. But roughage production, which is necessary for normal growth of ruminant animals, should be increased. However, lack of arable land and pasture land limits the production of good roughages. It is estimated that number of course for meat and milk production will be $2.5{\~}2.6$ million and total of $6.2{\~}7.5$ million tons of roughages should be produced. This implies that more than 1 million tons of roughage are needed, although pasture land, upland for forage crops, forage crops after rice cultivation and rice straw are utilized. Therefore, new reclamation of pasture land, increased roughage production in cultivating land, increased cultivation of forage crops after rice, more utilization of rice straw and active exploration of indigenous plant species as roughage resources should be promoted