• 산업기술연구
• /
• 제17권
• /
• pp.199-204
• /
• 1997

In this paper, the result of application of vibration method to the orthotropic plates with free edges supported on elastic foundation and with a pair of opposite edges under axial forces is presented. Such plates represent the concrete highway slab and hybrid composite pavement of bridges. The reinforced concrete slab can be assumed as a special orthotropic plate, as a close approximation. The highway slab is supported on elastic foundation, with free boundaries. Sometimes, the pair of edges perpendicular to the traffic direction may be subject to the axial forces. The plate is subject to the concentrated load/loads, in the form of traffic loads, or the test equipments. Finite difference method is used to obtain the deflection influence surfaces needed for vibration analysis. The influence of the modulus of the foundation, the aspect ratio of the plate, and the magnitudes of the axial forces and the concentrated attached mass on the plate, under the natural frequency is thoroughly studied.

• Coupled systems mechanics
• /
• 제11권5호
• /
• pp.459-483
• /
• 2022

In the present work, a new photothermoelastic model based on Moore-Gibson-Thompson theory has been constructed. The governing equationsfor orthotropic photothermoelastic plate are simplified for two-dimension model. Laplace and Fourier transforms are employed after converting the system of equations into dimensionless form. The problem is examined due to various specified sources. Moving normal force, ramp type thermal source and carrier density periodic loading are taken to explore the application of the assumed model. Various field quantities like displacements, stresses, temperature distribution and carrier density distribution are obtained in the transformed domain. The problem is validated by numerical computation for a given material and numerical obtained results are depicted in form of graphs to show the impact of varioustheories of thermoelasticity along with impact of moving velocity, ramp type and periodic loading parameters. Some special cases are also explored. The results obtained in this paper can be used to design various semiconductor elements during the coupled thermal, plasma and elastic wave and otherfieldsin thematerialscience, physical engineering.

• 대한토목학회논문집
• /
• 제13권5호
• /
• pp.19-27
• /
• 1993

파괴역학에서 최근의 연구들은 균열체의 강도를 해석함에 있어서 균열선단 주위의 탄성 에너지 해방용, 균열확장력 그리고 응력장의 특성 등에 대한 지식을 요구하고 있다. 이런 연구들의 주안점은 에너지율, 응력장 그리고 탄성이방성체의 여러가지 경우들을 설명하는 데 있다. 철근콘크리트, 목재, 박층구조 그리고 각각의 방향으로 성질을 가지는 탄성체들은 대부분 직교이방성이다. 본 연구에서는 균열선단에 특이요소를 사용하고 균열선단 부근에서 아주 세밀한 요소를 사용하여 직교이방성 탄성체의 응력확대계수를 결정 하였다. 본 연구에서 응력확대계수를 구하기 위해 변위상관법을 사용하였으며 타 논문의 결과와 잘 일치함을 알 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.257-264
• /
• 1998

Sound transmission characteristics are investigated on the corrugated panels which used for railway vehicles. A special purpose program is developed to calculate the sound transmission loss of orthotropic multi-layered panels. Several kinds of corrugated panels are analysed to estimate the transmission performance and the results are compared with the measured data. Calculated transmission losses show good agreement with the measured values in corrugated panels and aluminum/foam multi-layered panels. The analysis results can be utilized to design the corrugated panels and multi-layered panels which are required to reduce the interior noise in railway vehicles.

• 산업기술연구
• /
• 제16권
• /
• pp.139-145
• /
• 1996

Many of the bridge systems, including the girders and cross-beams, and concrete decks behave as the special othotropic plates. A method of calculating the natural frequency corresponding to the first mode of vibration of beam and tower structures with irregular cross-sections was developed and reported by D. H. Kim in 1974. Since 1989, The author has extended this method to Vibration analysis of two dimensional problems including composite laminates, and has reported at several conferenes. Frequently, the bridge floor panels are supported by girders and cross beams. Such panels as well as some of the building floor panels can be assumed as simple supported special orthotropic plates. In this paper, the result of application of simple method of vibration analysis developed by D. H. Kim, to the simply supported sandwich panels with point Mass/Masses is presented.

• 한국강구조학회 논문집
• /
• 제14권1호
• /
• pp.23-29
• /
• 2002

거더와 가로보를 포함하는 많은 교량시스템과 콘크리트 상판은 특별직교이방성 판처럼 거동한다. 그런데 Navier나 Levy의 해로 해결할 수 없는 경계조건을 가졌거나, 불규칙 단면을 가진 경에에 해석해를 얻기 것이 매우 어렵다. 더구나 이러한 경우, 고유치 문제에 대한 수치해법은 너무 복잡하다. 그러나 불규칙 단면을 갖는 보와 탑에 대해, 첫 번째 진동모드에 해당하는 고유진동수를 계산하는 방법이 1974년 '김'에 의해 개발되어 발표되었다. 최근에 이 방법은 2차원 문제로 확장되었고 전단변형이 고려된 복합판에 적용되어 왔다. 본 연구에서는 이 방법을 다양한 경계조건을 갖는 특별직교이방성 복합적층판에 적용하여 타당성을 검토하고 그 해석결과를 제시한다.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.447-456
• /
• 1997

Stress intensity factor of semi-infinite parallel crack propagation with constant velocity in dissimilar orthotropic strip under out-of-plane clamped desplacement is investigated. Using Fourier integral transforms the boundary value problem is derived by a pair of dual integral equation and finally reduced to a single Wiener-Hopf equation. By applying Wiener-Hopf technique the equation is solved. Applying this result the asymptotic stress fields near the crack tip are determined, from which the stress intensity factor is obtained in closed form. The more the ratio of anisotropy or the ratio of bi-material shear modulus increase in the main material including the crack, the more the stress intensity factor increases. Discontinuity in the stress intensity factor is found as the parallel crack approaches the interface. In special case, the results of isotropic materials agree well with those by the previous researchers.

• 대한기계학회논문집
• /
• 제16권8호
• /
• pp.1485-1492
• /
• 1992

본 연구에서는 Rayleigh-Ritz method를 사용하여 타원형(원형 포함) 평판의 자유 진동 문제를 해석한다. admissible함수로서는 단순 다항식의 곱(products of simple polynomials)을 사용한다. 이 함수는 다항식의 첫 항의 차수를 0,1 또는 2로 함으로써 각각 자유, 단순 지지 또는 고정인 경계 조건을 간편히 처리할 수 있게 하며, 에너지식에 포함된 적분값을 계산함에 있어서 점화식을 유도하여 사용함으로써 계산을 매우 간편히 수행할 수 있게 한다. 본문의 이론 해석은 직교 이방성 타원형 평판에 대해서 제시된다. 그러나 수치 결과는, 이방성의 다양한 조합에 대한 많은 결과를 제시하는 것은 그다지 의미가 없는 관계로, 등방성 평판에 대해서 주어진다. 등방성 평판의 여러 가지 세장비에 대한 결과는 설계 데이터로써 활용될 수 있을 것이다. 덧붙여 대표적으로 세장비가 0.5인 평판에 대해서 nodal pattern이 그림으로 제시된다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 추계학술발표대회 논문집
• /
• pp.9-12
• /
• 2001

Composite materials can be used economically and efficiently in broad civil engineering applications when standards and processes for analysis, design, fabrication, construction and quality control are established. Many of the bridge systems, including the girders and cross-beams, and concrete decks behave as the special othotropic plates. Such systems with boundary conditions other than Navier or Levy solution types, or with irregular cross sections, analytical solution is very difficult to obtain. Numerical method for eigenvalue problems are also very much involved in seeking such a solution. A method of calculating the natural frequency corresponding to the first mode of vibration of beam and tower structures with irregular cross-sections was developed and reported by the author in 1974 Recently, this method was extended to two dimensional problems including composite laminates, and has been applied to composite plates with various boundary conditions with/without shear deformation effects and reported at several international conferences including the Eighth Structures Congress of American Society of Civil Engineers in 1990. In this paper, the result of application of this method to the special orthotropic plates with various boundary condition is presented.

• 산업기술연구
• /
• 제17권
• /
• pp.191-197
• /
• 1997

For each construction material used, there is certain theoretical limit in sizes. For tall building construction, the reduction in slab weight is the first step to take in order to break such size limits. In this paper, the feasibility of such objective is proven and given by numerical analysis result. For a typical building slab, both concrete and advanced composite sandwich panels are considered. The concrete slab is treated as a special orthotropic plate to obtain more accurate result. Any method may be used to obtain the deflection influence surfaces needed for this vibration analysis. Finite difference method is used for this purpose, in this paper. The influence of the modulus of the foundation on the natural frequency is thoroughly studied.