• 융합정보논문지
• /
• 제12권1호
• /
• pp.66-75
• /
• 2022

본 연구에서는 대학 취업지원센터에서 제공하는 취업지원 프로그램의 실효성을 평가하고자 하였다. 이를 위해 K대학에서 운영하는 17개 취업지원 프로그램을 기업연계, 상담, 자격증, 채용지원, 특강 등 6개 차원으로 구분하였고, 최근 취업한 졸업생을 대상으로 설문조사를 실시해 유용성을 평가하였다. 그 결과 모든 취업지원 프로그램은 보통 이상의 유용성이 있는 것으로 나타났다. 차원별로는 자격증, 취업지원, 해외, 특강, 상담, 기업연계 관련 프로그램의 순으로 유용성이 높게 집계되었다. 이중 기업연계, 특강, 상담 관련 프로그램은 취업지원 프로그램의 전반적유용성을 높여주는 요인으로 분석되었다. 따라서 취업지원센터는 신규 프로그램을 계획할 때, 기업연계, 특강, 상담 관련 프로그램을 우선 기획하는 것이 바람직한 방향일 것이다.

• 가족자원경영과 정책
• /
• 제11권4호
• /
• pp.93-114
• /
• 2007

The purpose of this study was to analyze the educational program that is offered on the information menu in the homepage (Familynet) of the Healthy Family-Support Center (HFSC) and suggest developmental directions. For this purpose, first, it deduced that the managerial principles of the education program, from related theories, are included in the family-system, family-structure, family-structure analysis, family life-cycle and ecological system theories. Second, it analyzed the educational programs of 44 local centers that are connected to the homepage (familynet.or.kr) of HFSC. Finally, it suggested developmental directions for managerial improvements of educational programs. As a result, the most popular part in the educational program was parent education, especially the visiting-father education program. The number of couple-related education programs were fewer than those for parent education, because it is difficult for couples to be present at the same time. Family and Self-Cognition programs cover insufficient contents in the parent-education program. Though total program in familylife education is quite large, the number of programs in each separate part is far too small for such a wide subject. So, each part in the program should be made more sufficient. Finally, it suggested the development of an evaluation system and a coaching process as special services for families that are in different development stages and have different family experiences, resources, needs and goals.

• International Journal of Computer Science & Network Security
• /
• 제22권7호
• /
• pp.245-251
• /
• 2022

Educational reform in Ukraine encourages the use of multimedia technologies in the training of specialists in Physical Education and Sports, which is one of the promising directions of education development. Therefore, the article specifies the content of the terms "innovation" and "technology". For modern society, the introduction of multimedia technologies in education is not so much theoretical as pragmatic, since under condition of globalization it concerns its historical development and prospects associated with the so-called "high technologies".Our goal is to improve the training of Physical Education and Sports specialists by means of multimedia technologies. All of innovative technologies can be divided into four groups, depending on the appropriate form of educational activity for their use. The development of multimedia technologies in the training of specialists in Physical Education and Sport at the present stage of education development should be carried out in accordance with the criteria of manufacturability, which are presented in the article: scientism, to rely on the theoretical provisions of pedagogical science and methods of teaching the discipline, socially recognized educational goals, prospects for modernization of Education; consistency, which provides for the interaction of parts and the whole in the organization of the study environment, as a result of which the physical development of the young generation is an integral entity; guarantee, that is, the error between the planned and obtained results should be minimal; manageability, that is, full management of the stages of work of the teacher and students, which make up the completed cycle of actions; mass participation, for the purpose of applying the technology does not depend on the physical training of students, the pedagogical skill of the teacher and the type of educational institutions. The article presents the theory and method of organizing sports events and circuses in the training of specialists in Physical Education and Sports by means of multimedia technologies. In order to increase the level of physical development of a person, physical fitness and the state of health of students, which has a clear trend to constant deterioration, it is necessary to instill love for sports, carry out high-quality training and organize sports events using multimedia technologies. In the process of sports activities, the participants' mental education is carried out. There are two types of communication here: direct and indirect, which are described in the article.In games and sports competitions, there are many opportunities for forming rules of collective behavior. The main issues of the organization of sports activities by means of multimedia technologies have been clarified. During sports competitions, the tasks presented in Physical Education and sports classes are improved, which ensure the improvement of physical and theoretical training of the individual. The pleasure of sports, bright, emotional spectacles, confirmed by multimedia technologies, arises from the participation of the viewer in them.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.635-642
• /
• 2010

The paper presents a multimedia educational program of DC servo drives for distant learning with a special emphasis on sliding mode control. The program contains of three parts: animation, simulation and internet based measurement. The animation program explains the operation of DC motors, gives its time- and frequency-domain equations, transfer functions and the theoretical background necessary for controller design for DC servo motors. The simulation model of the DC servo motor and the controller can be designed by the students based on the animation program. The students can also test their controllers through the internet based measurement, which is the most important part from engineering point of view. After the measurements are executed, the students can download the measured data and compare them to the simulation results.

• 반도체디스플레이기술학회지
• /
• 제21권4호
• /
• pp.77-80
• /
• 2022

Automatic Vision Inspection (AVI) systems automatically detect defect features and measure their sizes via camera vision. It has been populated because of the accuracy and consistency in terms of QC (Quality Control) of inspection processes. Also, it is important to predict the performance of an AVI to meet customer's specification in advance. AVI are usually suffered from false negative and positives. It can be overcome by providing extra information such as 3D depth information. Stereo vision processing has been popular for depth extraction of the 3D images from 2D images. However, stereo vision methods usually take long time to process. In this paper, retro optical system using reflectors is proposed and experimented to overcome the problem. The optical system extracts the depth without special SW processes. The vision sensor and optical components such as illumination and depth detecting module are integrated as a unit. The depth information can be extracted on real-time basis and utilized and can improve the performance of an AVI system.

• 치위생과학회지
• /
• 제22권4호
• /
• pp.233-240
• /
• 2022

Background: In modern society, rapid changes in the medical environment have required medical staff to access various information and be competent in active and effective problem-solving through collegial interactions. In line with these changes, universities are aiming to connect education. This study aimed to provide basic data of connected-convergence education by survey the awareness and needs of college students in health-related fields. Methods: This study included 122 college students from the health field. A survey regarding "the awareness and need of connected-convergence education" was conducted and general characteristics of the participants were collected from June to July 2022. Results: The awareness of connected-convergence education was low at 19.7%, but the intention to participate was high at 74.6%. Subject requirements were 18.0% for medical psychology, 13.5% for communication and counseling, 13.5% for medical artificial intelligence technology convergence, and 10.4% for sports health management. In the group showing high satisfaction with the major curriculum, the demand for connected education was also high. For efficient operation, it was investigated that it was necessary to secure specialized training courses, recognition of liberal arts credits, the right to register for courses equal to those of major students, and secure dedicated classrooms. Conclusion: Although the awareness and experience of connected-convergence education among the participants were low, the intention to participate was high. As such a plan to revitalize the university curriculum was required. It is timely to discuss the nurturing of convergence-type talents and multidisciplinary thinking skills. It is meaningful to provide basic data necessary for connected-convergence education in health-related fields at university. Universities should strive to enhance job competency in the health field by providing connected-convergence education based on student demands.

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.365-380
• /
• 2016

Purpose: The purpose of this study was to ascertain the need to reform curriculums for digital experts in a way that include the practical and educational aspects of dental labs by determining why educational reforms are needed to comply with changes in dental technology business that are brought by the applications of digital scanning and what changes are being actually brought by the use of CAD/CAM. Methods: This study analyzed the need of education and practice in relation to CAD/CAM by using the independent sample t-test and One-way ANOVA. in accordance with the participants demographic characteristics and job-related variables and factors related to CAD/CAM, and provided only some of the analysis results that were found statistically significant. Concerning the need of education and practice in relation to CAD/CAM, the study also used the independent sample t-test to measure difference in the perception of that need within each of the three groups, or those of job performance, job efficiency and knowledge gain at the signficance level of ${\alpha}=.05$. Results: Dental technologists surveyed here were perceiving that the use of CAD/CAM would bring changes in their job performance, job efficiency and knowledge gain. They were expecting that the biggest changes would be made in work climate and product quality as sub-areas of job performance. However, they said that in terms of job efficiency, the use of CAD/CAM would change job contribution, job satisfaction and job efficiency, but not lead to staffing. These results suggest that more special programs for CAD/CAM education are needed to bring up CAD/CAM experts who are more specialized. Conclusion: Among 13 skills related to CAD/CAM, what is most needed to be educated to dental technologists was "molding the occlusal surface" (M=4.19), followed by "designing the 3-D work" (M=4.17), "final shape modification" (M=4.16), "molding the border" (M=4.15) and "checking the fit of prothesis" (M=4.14) in order.

• 한국응급구조학회지
• /
• 제9권2호
• /
• pp.5-20
• /
• 2005

Purpose: This study is to examine the relationship between safety awareness and safety accident occurrence with elementary school students. Materials and methods: It selected 10 elementary schools under the supervision of Jeonnam Board of Education and sampled 700 students randomly from 2-3 classes in the 5th and the 6th grade. One preliminary survey was conducted to revise and complement the contents and forms of questionnaire with 70 students of a school from Apr. 1 to 6, 2004 and this study was conducted from Apr. 10 to 30, 2004. Total 700 questionnaires were distributed and 681 were collected (97%) and 602 were used for final analysis except 79 lacking responses. Data collected were analyzed with SPSS statistical program. Results: The average score of safety awareness of subjects by area was high as 2.72 points out of a possible 3. Area showing the highest safety awareness was safety from fire. Girl students had higher safety awareness than boy students. The fifth graders had higher safety awareness than the sixth graders. In safety awareness by the number of siblings, single son or single daughter showed the highest safety awareness. 53.2% of the subjects experienced accident for one year, the frequency of accident was mostly once and most of accidents were occurred at school. Accidents for the last year were higher in boy students, the sixth graders. According to relationship between safety awareness and safety accident, group with lower safety awareness in school safety(P < .022), traffic safety(P < .016), fire safety(P < .019), home safety(P < .007) and accident treatment and first aid(P < .003) had higher safety accidents than that with higher safety awareness. Conclusion: Development of safety education program by grade, that of parents safety education program, field experience and practice with students, teachers and parents and various safety education programs should be substantially and repeatedly accomplished for prevention education of safety accidents. In addition, to prevent and cope with safety accidents, safety education should be reflected on normal education, safety education textbook be developed, special safety education teachers be employed for safety education.

• 융합정보논문지
• /
• 제9권7호
• /
• pp.114-121
• /
• 2019

본 연구에서는 일반초등학교 교사 297명을 대상으로 ADHD아동교육에 대한 인식에 대해 알아보았다. ADHD아동 교육에 대한 인식은 ADHD아동의 통합교육에 대한 태도, 부담감, 효능감, 촉진여건 네 가지 영역으로 구성된 설문지를 통해 이루어졌다. 수집된 설문지는 SPSS(WIN 22.0)의 기술통계를 사용하여 빈도와 백분율을 산출하였다. 연구결과 첫째, 일반초등교사들은 ADHD아동의 통합교육을 위해 노력 하는 것으로 나타났다. 둘째, 일반초등교사들의 ADHD아동교육에 대한 부담감에서는 ADHD아동이 일반아동의 학습방해, 긍정적 학습분위기 방해, 일반교실의 질서 유지 방해, 교사의 수업 진행을 방해한다고 나타났다. 셋째, ADHD아동교육에 대한 일반초등교사들의 효능감에서는 ADHD증상에 대한 지식 습득, ADHD아동의 진단과 평가, ADHD아동 교육을 위한 교수 능력, ADHD아동의 행동을 다루는 능력은 없는 것으로 나타났다. 넷째, ADHD아동교육에 대한 학교차원의 촉진여건에서는 ADHD 아동을 위한 전문인력 지원, ADHD 아동 지원을 위한 외부 기관과의 연계는 이루어지지 않는 것으로 나타났다.

• 한국항해항만학회지
• /
• 제30권1호
• /
• pp.17-22
• /
• 2006

최근 액화천연가스(Liquefied Natural Gas, LNG)에 대한 수요가 우리나라는 물론이고 전 세계적으로 증가하면서 LNGC(LNG Carrier)에 대한 발주 또한 증가하고 있다. LNG는 위험 화물로써 사고 방지를 위해 그 운송 및 관리에 있어서 특별한 전문지식이 요구되는데 이를 운송, 관리하기 위한 항해사의 수요가 폭발적으로 증가할 것으로 예상된다. 따라서 이러한 위험 화물인 LNG를 운송하는 LNGC항해사들에게는 보다 전문적이고 체계적인 교육 및 훈련이 절실하게 요구되고 있다. 본 논문은 국적 LNGC 항해사의 교육 및 훈련 실태를 조사함으로써 전문적이고 체계적인 교육 및 훈련이 이루어지도록 하는데 있다. 이를 위해 IMO 규정, IMO 규정에 따른 한국해양수산연수원 교육, 국적선사 및 일본의 "T"회사 LNGC 교육 프로그램을 상호 비교분석하였다.