• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.382-385
• /
• 2007

Constantly enhancing positioning accuracy by the Global Positioning System (GPS) technique is of great importance, but challenging, especially after the GPS positioning technique has been improved considerably during the past two decades. The associated main error sources have been reduced substantially, if not eliminated. Troposhpeic influence with its highly temporal and spatial variability appears to be one of the major error sources. It is hence an increased interest among GPS researchers to reduce the tropospheric influence or delay. Two techniques have been commonly implemented to correct the tropospheric impact. The first technique, known as parameter estimation, characterizes the path delay with empirical models and the parameters of interest are determined from the GPS measurements. The second strategy, termed as external correction, involves independent path delay measurements. The present study is an integration of both techniques in which the parameter estimation as well as external correction are used to correct the path delay for $110{\sim}210$ km range baselines. Twenty-four parameters have been obtained in 24 hours solution by setting the cutoff angle at 3 and 15 degrees for parameter estimation strategy. Measurements from meteorological instruments and water vapor radiometer (WVR) are applied in the GPS data processing, separately, as an external strategy of present research work. Interesting results have been found, indicating more stable repeatability in baseline when the external correction strategy is applied especially with the inclusion of WVR observations. The offset of an order of 1 cm is found in the baselines determined by the two strategies. On the other hand, parameter estimation exhibits more stable in terms of GPS height repeatability. The offset in the GPS height determined by the two strategies is on the order of few centimeters.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.889-896
• /
• 2007

From the direct outflow of Chungju Dam to the junction of water body and watershed in Paldang lake is the scope of this research. This study performed to investigate the main cause of water quality deterioration and the influenced region in the middle field range of the Namhan river Basin with the onsite measurement of water quality and flow rate simultaneously during spring dry season. The purpose of this study is to find out the time-spatial variation characteristics of water quality and flow rate. Following the flow direction $BOD_5$ and $COD_{Mn}$ concentration increased to the highest value of 3.7 mg/L, 5.9 mg/L at Wolgesa respectively. Chl.a concentration increased to $50mg/m^3$ or so at Kangsang, after that it decreased to $37mg/m^3$ at the junction of Paldang lake. Organic matter concentration variation trend showed similar than that of Chl.a. Also $BOD_5$ concentration tendency was similar to Chl.a in every measuring sites except Paldang lake mixing zone. The major factors of water quality deterioration in Namhan river and Paldang lake during dry season were algal bloom and followed internal production. High phosphorus load from Dalcheon and Seom river caused dry season algal bloom and internal production in transitional zone which was stagnant area in downstream of Namhan river.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.840-848
• /
• 2009

Spatial and temporal distributions of POC and DOC were surveyed in the North Han River system, Korea The proportion of algal cells was calculated in four reservoirs (Lakes Soyang, Paro, Chunchon, and Uiam). Monthly average DOC concentrations ranged from 1.5 to 2.3 mg C/L, and POC showed larger variation than DOC (range 0.3 to 1.9 mg C/L). The average proportion of POC in TOC was higher than those of typical natural lakes. Due to the influence of the Asian summer monsoon, the seasonal variation in POC concentration depended on heavy rain events occurring during the summer. POC concentrations increased during the summer monsoon season due to turbid storm runoff laden with debris, while DOC concentrations did not increase. The highest POC concentrations were observed in Lake Soyang in 2006 when a severe rain event occurred. In two deep stratified reservoirs (Lake Soyang and Paro) storm runoffs formed an intermediate turbidity layer with high POC and chlorophyll concentrations which is thought to originate from terrestrial debris and periphyton transported by inflowing streams. The proportion of algal cells in total POC was much lower than for most natural lakes, and it varied with season; low in the monsoon season and high in dry seasons with algal blooms. An analysis of POC concentration and chlorophyll a concentration showed that the ratio of POC/Chl.a varied from 24 to 80.

• Journal of Korean Society on Water Environment
• /
• v.25 no.6
• /
• pp.922-934
• /
• 2009

The transport of contaminants and spatial variation in a deep reservoir are certainly governed by the thermal structure of the reservoir. There has been continuous efforts to utilize three-dimensional (3D) hydrodynamic and water quality models for supporting reservoir management, but the efforts to validate the models performance using extensive field data were rare. The study was aimed to evaluate a 3D hydrodynamic model, ELCOM, in Daecheong Reservoir for simulating heat fluxes and stratification processes under hydrological years of 2001, 2006, 2008, and to assess the impact of internal wave on the reservoir mixing. The model showed satisfactory performance in simulating the water temperature profiles: the absolute mean errors at R3 (Hoenam) and R4 (Dam) sites were in the range of $1.38{\sim}1.682^{\circ}C$. The evaporative and sensible heat losses through the reservoir surface were maximum during August and January, respectively. The net heat flux ($H_n$) was positive from February to September, while the stratification formed from May and continued until September. Instant vertical mixing was observed in the reservoir during strong wind events at R4, and the model reasonably reproduced the mixing events. A digital low-pass filter and zero crossing method was used to evaluate the potential impact of wind-driven internal wave on the reservoir mixing. The results indicated that most of the wind events occurred in 2001, 2006, 2008 were not enough to develop persistent internal wave and effective mixing in the reservoir. ELCOM is a suitable 3D model for supporting water quality management of the deep and stratified reservoirs.

• New & Renewable Energy
• /
• v.9 no.4
• /
• pp.13-18
• /
• 2013

Wind turbines should generally be installed at a certain distance from a road to ensure passengers' safety. In Korea, there is no clear guidance as the Ministry of Environment first proposed a road setback distance of 400 m in the Onshore Wind Farm Siting Guidelines draft proposed in July 2012, and then modified it to 1.5 times the height of the wind turbine in October of the same year. This study analyzed the dynamic range of onshore wind resource potential according to how the road setback distance is set using the Korea Wind Atlas with 100m spatial resolution made by the Korea Institute of Energy Research, the transportation network of the Ministry of Construction and Transportation, and the forest road network of the Korea Forestry Service. Owing to the geographical characteristics of Korea, where mountainous terrain accounts for 70% of the total territory, the wind resource potential within 1 km from forest roads are estimated to be 14.3 GW, 14% of Korea's total wind resource potential. In addition, the construction distance of new road for transporting wind turbines from the existing road to a wind farm site is estimated as less than 2 km. Given the limited wind resource potential and geographical constraints, an assessment system that can maximize wind resource utilization and ensure road safety at the same time, and which takes into account the regional characteristics instead of applying the fixed road setback distance across-the-road, is required.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.687-695
• /
• 2011

Many internet portals provide maps with spatial information services. Recently, various images including aerial, satellite, street view, and photo-realistic 3D city models are provided as well as maps. This study suggested a method for geometric correction of the panoramic aerial images in the internet portal and 3D building modeling using information which is available in the internet. The key of this study is to obtain all necessary data easily from internet without restrictions. Practically, the ground control coordinates could be available from geo-referenced internet maps, and stereo pairs of the aerial images and close-range photographs for photo-realistic object modeling are provided by the internet service. However, the ground control points are not suitable for accurate mapping. RMSE of the plotting was about 9 meters and reduced upto 4 meters after coordinate transformation. The proposed methods would be applicable to various applications of photo-realistic object modeling which do not require high accuracy.

• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.119-128
• /
• 2008

On the many highways, severe traffic congestions happen chronically and make traffic problems like reduction of mobility because of rapid increase of vehicles though road construction has been last. In order to solve these traffic problems, it is needed to find the trend and the symptom of traffic congestion and to analyze the cause of congestion and the(spatial) range affected by congestion. To develop the traffic condition monitoring index prior to doing all those things is most important. With this reason, many countries including U.S. had been developed the congestion criteria and indices. In this paper, applicability and characteristics of existing traffic congestion indices were considered and the direction for development of a new traffic condition index was suggested to achieve an effective traffic management.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.2
• /
• pp.63-73
• /
• 2011

The Pseudorange Corrections (PRC), which are used in DGPS as calibration messages, can contain outliers, noise, and anomalies, and these abnormal events are unpredictable. When those irregular PRC are used, the positioning error gets higher. In this paper, we propose a strategy of detecting and correcting outliers, noise, and anomalies by modeling the changing pattern of PRC through polynomial curve fitting techniques. To validate our strategy, we compared positioning errors obtained without PRC calibation with those with PRC calibration. As a result, we found that our algorithm performs very well; the horizontal RMS error was 3.84 m before the correction and 1.49 m after the correction.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.131-139
• /
• 2009

The existing vessel monitoring system using the ground surveillance radar has a difficulty in monitoring ships continuously due to the limited range of detecting ships. For resolving this problem, we carry out a research on ship detection which is to be the core technology of vessel monitoring system for ocean monitoring using SAR imagery. There are two different methods of detecting ships in SAR imagery: detection of the ship target itself and detection of the ship wake. In this paper, we mainly focus on algorithms which detect the ship itself, and also present the accuracy test after extracting positional and directional figures of the ships. After rectifying input SAR imagery using polynomial transformation, we use Wiener filter to remove speckle noises. A labeling technique and morphological filtering in conjunction with Otsu's method are used to automatically detect the ships based on the image processing domain. For ground truth data, information from a radar system is used, which allows assessing the accuracy of the proposed method. The results show that the proposed method has the high potential in automatically detecting the ships and its positional/directional figures in a fast way.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.21-28
• /
• 2010

Air pollution monitoring has attracted a lot of interests because it affects directly to the human life quality. The most of the current air pollution monitoring stations use the expensive and bulky instruments and are only installed in the specific area. Therefore, it is difficult to install them to as many places as people need. In this work, we constructed a low price and small size Radio Frequency(RF) sensor system to solve this problem. This system also had the measurement range similar to the ones used in the air pollution forecast systems. This system had the sensor unit to measure the air quality, the central processing unit for air quality data acquisition, the power unit to supply the power to every units, and the RF unit for the wireless transmission and reception of the data. This system was easy to install in the field. We also added a GPS unit to track the position of the RF-sensor in real time by wireless communication. For the various measurements of the air pollution, we used CO, $O_3$, $NO_2$ sensors as gas sensors and also installed a dust sensor.