• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.58-66
• /
• 2009

The thermotropic liquid crystalline behavior of the homologous series of cellulose tri[4-{4'-(nitrophenylazo) phenoxycarbonyl}] alkanoates (NACEn, n=2$\sim$8, 10, the number of methylene units in the spacer) have been investigated. All of the homologoues formed monotropic nematic phases. The isotropic-nematic transition temperature ($T_{iN}$) decreased when n is increased up to 7, but it became almost constant when n is more than 7. The plot of transition entropy at $T_{iN}$ against n had a sharp negative inflection at n=7. The sharp change at n=7 may be attributed to the difference in arrangement of the side groups. The melting temperature ($T_m$) and associated entropy change at $T_m$, in contrast with $T_{iN}$ and associated entropy change at $T_{iN}$, exhibited a distinct odd-even effect, suggesting that the average shape of the side chains in the crystalline phase is different from that in the nematic phase. The thermal stability and degree of order of the nematic phase observed for NACEn were significantly different from those reported for the homologous series of side-chain and combined type liquid crystal polymers bearing azobenzene or biphenyl units in the side chains. The results were discussed in terms of the differences in the chemical structure, the flexibility of the main chain, the mode of chemical linkage of the side group with the main chain, and the number of the mesogenic units per repeating unit.

• Research in Plant Disease
• /
• v.22 no.2
• /
• pp.127-131
• /
• 2016

During the year 2014, black locust (Robinia pseudoacacia L.) had been observed with dark brown spots on the leaves at Andong, Cheongsong, Mungyeong in Korea. Symptoms initially appeared as small, black lesions on the leaves, and sometimes, the leaves become yellow and ultimately leads to fall off the leaves. The pathogenic fungus grown in potato dextrose agar was white or sometime gray with mycelia in tufts and from which numerous conidia were produced. The conidia were straight and fusiform in shape and measured $8.3-17.2{\times}2.5-4.1{\mu}m$. Internal transcribed spacer (ITS) rRNA sequence analysis for sequence similarity of the ITS region revealed 100% identity with nucleotide sequences for Colletotrichum acutatum. The morphological characteristics, pathogenicity and molecular data have been confirmed that the symptomatic pathogen was C. acutatum. This is the first report of anthracnose caused by C. acutatum on black locust in Korea.

• Mycobiology
• /
• v.42 no.2
• /
• pp.206-209
• /
• 2014

In this study, we identified the causative agent of stem-end rot in potatoes that were grown in Gangwon alpine areas of Korea in 2013. The disease symptoms included appearance of slightly sunken circular lesion with corky rot on the potato surface at the stem-end portion. The fungal species isolated from the infected potatoes were grown on potato dextrose agar and produced white aerial mycelia with dark violet pigments. The conidiophores were branched and monophialidic. The microconidia had ellipsoidal to cylindrical shapes and ranged from $2.6{\sim}11.4{\times}1.9{\sim}3.5{\mu}m$ in size. The macroconidia ranged from $12.7{\sim}24.7{\times}2.7{\sim}3.6{\mu}m$ in size and had slightly curved or fusiform shape with 2 to 5 septate. Chlamydospores ranged from $6.1{\sim}8.1{\times}5.7{\sim}8.3{\mu}m$ in size and were present singly or in pairs. The causal agent of potato stem-end rot was identified as Fusarium oxysporum by morphological characterization and by sequencing the internal transcribed spacer (ITS1 and ITS4) regions of rRNA. Artificial inoculation of the pathogen resulted in development of disease symptoms and the re-isolated pathogen showed characteristics of F. oxysporum. To the best of our knowledge, this is the first study to report that potato stem-end rot is caused by F. oxysporum in Korea.

• Korean journal of applied entomology
• /
• v.42 no.1
• /
• pp.65-70
• /
• 2003

For the purpose of the protection of beneficial insects from pathogens and the development of control agent against pests, a strain of Metarhizium sp. was isolated from the infected Protaetia brevitarsis seulensis larvae in Korea. Under the scanning electron microscope, the isolate, Metarhizium sp. KMA-1, showed distinct formation of conidia on the palisade-like masse which were comprised of elongate chains and this shape is a typical feature of Metarhizium species. PCR techniques were used to identify the isolate and the primers used were designed on the basis of two kinds of rRNAs sequences, 28S rRNA and internal transcribed spacer(ITS). The specific PCR products from each primer set were amplified and the DNA sequences were determined for the similarity comparison. Sequence alignment of these fragments using GenBank database resulted in the highest homology similarity between the isolate Metarhizium sp. KMA-1 and M. anisopliae. From these results, the isolate Metarhizium sp. KMA-1 in this study was identified as M. anisopliae.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.417-424
• /
• 2011

A fuel assembly consists of five major components, i.e., a top end piece (TEP), a bottom end piece (BEP), spacer grids (SGs), guide tubes (GTs) and an instrumentation tube (IT); in addition, it also includes fuel rods (FRs). The TEP/BEP should satisfy stress intensity limits according to the conditions A and B of ASME, Section III, Division 1-Subsection NB. In a dual-cooled fuel assembly, the array and position of fuel rods are different from those in a conventional PWR fuel assembly; these changes are necessary for achieving power uprating. The flow plates of the TEP and BEP have to be modified accordingly. The pattern and shape of the flow holes were newly designed. To verify the strength compatibility, the Tresca stress limit according to the ASME code was investigated in the case of an axial load of 22.241 kN. In this paper, the stress linearization procedure for strength evaluation of a newly designed TEP is presented.

• Nuclear Engineering and Technology
• /
• v.48 no.4
• /
• pp.847-858
• /
• 2016

An overview is given on the work of the Laboratory of Nuclear Energy Systems at ETH, Zurich (ETHZ) and of the Laboratory of Thermal Hydraulics at Paul Scherrer Institute (PSI), Switzerland on tight-lattice bundles. Two-phase flow in subchannels of a tight triangular lattice was studied experimentally and by computational fluid dynamics simulations. Two adiabatic facilities were used: (1) a vertical channel modeling a pair of neighboring sub-channels; and (2) an arrangement of four subchannels with one subchannel in the center. The first geometry was equipped with two electrical film sensors placed on opposing rod surfaces forming the subchannel gap. They recorded 2D liquid film thickness distributions on a domain of $16{\times}64$ measuring points each, with a time resolution of 10 kHz. In the bubbly and slug flow regime, information on the bubble size, shape, and velocity and the residual liquid film thickness underneath the bubbles were obtained. The second channel was investigated using cold neutron tomography, which allowed the measurement of average liquid film profiles showing the effect of spacer grids with vanes. The results were reproduced by large eddy simulation + volume of fluid. In the outlook, a novel nonadiabatic subchannel experiment is introduced that can be driven to steady-state dryout. A refrigerant is heated by a heavy water circuit, which allows the application of cold neutron tomography.

• The Journal of Korean Medicine
• /
• v.20 no.4
• /
• pp.16-22
• /
• 2000

This study intends to report the significance of several experimental results obtained from analysing the genes extracted from the plants and herbal medicine such as P. temalta (Thunb.) Breit, A. amurense var serratum Nakai, A. erubescens (Wall.) Schott, Pinelliae Tuber and Arisaematis Tuber, mainly by the method of RAPD(randomly amplified polymorphic DNA) and the method of RFLP(restriction fragment length polymorphism) on ITS(internal transcribed spacer) region. Genomic DNA could be extracted from both original plants and dried materials. DNA fragments of P. temata kind and A. amurense kind showed the same aspect separately within the same species under the method of RAPD using random primer, while various aspects(polymorphism) were discovered among different species. In RAPD analysis by uniprimer, common bands were extracted from all types of P. temata in the case of uniprimer #4, which were distinguished from the kind of A. amurense. Other polymorphic bands appeared in between different A. amurense species as well. In the case of uniprimer #11, particular band came out in the kind of P. temata. On the other hand, in the case of uniprimer #5, #6, and #8, various bands(polymorhism) were revealed in both kinds of P. temata and A. amurense. Although further study is needed to ascertain whether these results are due to the differences of species, kinds, or growing place, the results could be used as a scientific method of identifying the substitutes for A. amurense genus. The author believes that as if P. temata class of plants used in this experiment are different among themselves in terms of the shape, size and property, those are clearly a class of P. temata or belong to the same genus.

• Nuclear Engineering and Technology
• /
• v.42 no.6
• /
• pp.656-661
• /
• 2010

Lead-alloys are very attractive nuclear coolants due to their thermo-hydraulic, chemical, and neutronic properties. By utilizing the HELIOS (Heavy Eutectic liquid metal Loop for Integral test of Operability and Safety of PEACER$^2$) facility, a thermal hydraulic benchmarking study has been conducted for the prediction of pressure loss in lead-alloy cooled advanced nuclear energy systems (LACANES). The loop has several complex components that cannot be readily characterized with available pressure loss correlations. Among these components is the core, composed of a vessel, a barrel, heaters separated by complex spacers, and the plenum. Due to the complex shape of the core, its pressure loss is comparable to that of the rest of the loop. Detailed CFD simulations employing different CFD codes are used to determine the pressure loss, and it is found that the spacers contribute to nearly 90 percent of the total pressure loss. In the system codes, spacers are usually accounted for; however, due to the lack of correlations for the exact spacer geometry, the accuracy of models relies strongly on assumptions used for modeling spacers. CFD can be used to determine an appropriate correlation. However, application of CFD also requires careful choice of turbulence models and numerical meshes, which are selected based on extensive experience with liquid metal flow simulations for the KALLA lab. In this paper consistent results of CFX and Star-CD are obtained and compared to measured data. Measured data of the pressure loss of the core are obtained with a differential pressure transducer located between the core inlet and outlet at a flow rate of 13.57kg/s.

• The Korean Journal of Mycology
• /
• v.47 no.1
• /
• pp.13-18
• /
• 2019

A fungal strain, designated PTT-2, was isolated from the bark of the trunk of a persimmon (Diospyros kaki) tree in Cheongdo, Korea. The isolate showed morphological similarities with Leptosphaerulina saccharicola. Strain PTT-2 had more rapid growth on potato dextrose agar medium than on oatmeal agar, malt extract agar, and synthetic nutrient poor agar media, with colony sizes of 53.8 mm, 49.8 mm, 48.4 mm, and 28.1 mm after 7 days at $25^{\circ}C$ temperature, respectively. Strain PTT-2 produced ascospores, which had irregular wavy edges, oblong to ellipsoidal shape, hyaline appearance and $23.6{\times}10{\mu}m$ size. The black ascomata were developed on PDA medium, and asci were recorded. A BLAST search of the internal transcribed spacer (ITS) region, TEF1-${\alpha}$ and RPB2 gene sequences revealed that strain PTT-2 showed more than 99% nucleotide similarity with a strain of Leptosphaerulina saccharicola previously reported from Thailand. A neighbor-joining phylogenetic tree was constructed by concatenating the above-mentioned sequences, and showed that strain PTT-2 clustered in the same clade with L. saccharicola. Based on these findings, this is the first record of Leptosphaerulina saccharicola occurring in Korea.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.105-110
• /
• 2008

We have proposed a new structure of poly-silicon thin film transistor(TFT) which was fabricated the LDD region using doping oxide with graded spacer by etching shape retio. The devices of n-channel poly-si TFT's hydrogenated by $H_2$ and $HT_2$/plasma processes are fabricated for the devices reliability. We have biased the devices under the gate voltage stress conditions of maximum leakage current. The parametric characteristics caused by gate voltage stress conditions in hydrogenated devices are investigated by measuring /analyzing the drain current, leakage current, threshold voltage($V_{th}$), sub-threshold slope(S) and transconductance($G_m$) values. As a analyzed results of characteristics parameters, the degradation characteristics in hydrogenated n-channel polysilicon TFT's are mainly caused by the enhancement of dangling bonds at the poly-Si/$SiO_2$ interface and the poly-Si Brain boundary due to dissolution of Si-H bonds. The structure of novel proposed poly-Si TFT's are the simplity of the fabrication process steps and the decrease of leakage current by reduced lateral electric field near the drain region.