DOI QR코드

DOI QR Code

Mechanical Performance Evaluation of a Top End Piece for Dual Cooled Fuels

이중냉각 핵연료 상단고정체의 기계적 성능평가

  • Received : 2010.05.10
  • Accepted : 2011.02.09
  • Published : 2011.04.01

Abstract

A fuel assembly consists of five major components, i.e., a top end piece (TEP), a bottom end piece (BEP), spacer grids (SGs), guide tubes (GTs) and an instrumentation tube (IT); in addition, it also includes fuel rods (FRs). The TEP/BEP should satisfy stress intensity limits according to the conditions A and B of ASME, Section III, Division 1-Subsection NB. In a dual-cooled fuel assembly, the array and position of fuel rods are different from those in a conventional PWR fuel assembly; these changes are necessary for achieving power uprating. The flow plates of the TEP and BEP have to be modified accordingly. The pattern and shape of the flow holes were newly designed. To verify the strength compatibility, the Tresca stress limit according to the ASME code was investigated in the case of an axial load of 22.241 kN. In this paper, the stress linearization procedure for strength evaluation of a newly designed TEP is presented.

핵연료집합체는 상단고정체, 하단고정체, 지지격자체, 제어관/계측관과 핵연료봉의 5 가지 주요 구성품으로 이루어져 있다. 여기서 상/하단고정체는 다른 구성품과 달리 ASME, Section III, Division 1 - Subsection NB 의 운전조건 A, B 에서의 stress intensity limits 를 만족하여야 한다. 이중냉각 핵연료집합체는 집합체당 출력을 증가시키기 위해서 기존의 가압경수로용 핵연료집합체에서 핵연료봉의 배열과 위치를 변화시켰는데 이로 인하여 핵연료봉 내/외부유로로 냉각수가 잘 흐를 수 있도록 상/하단고정체의 유로판의 형상을 수정하여야 한다. 본 논문에서는 설계하중조건에 대하여 수정된 상단고정체 유로판의 건전성평가를 위해 수행한 응력선형화과정을 자세히 설명하고 평가결과에 대하여 기술하였다.

Keywords

References

  1. The American Society of Mechanical Engineers,2007, 2007 ASME Boiler & Pressure Vessel Code,Section III, Division 1, Subsection NB, Class 1Components Rules for Construction of NuclearFacility Components.
  2. Kim, H.-K., Yoon, K.-H., Lee, Y.-H., Kim, J.-Y. andLee, K.-H., 2007, "Technical Challengers for Dual-Cooling Fuel Structural Components," Proceeding ofKNS 2007 spring.
  3. KAERI/RR-3088, 2009, “Development of DesignTechnology for Dual-Cooled Fuel Structure.”
  4. KAERI/TR-2289, 2002, “Shape Optimization of theSMART Central Cover by the ASME Code Criteria.”
  5. http://www.matweb.com
  6. Hibbitt, H.D., Karlsson, G.I. and Sorensen, E.P., 2008,ABAQUS user's Manual (ver 6.8-1), Rhode Island:HKS Inc.
  7. Choi, W.-S., Kim, T.-W. and Seo, K.-S., 2008, "ShapeOptimization of Perforated Reactor Head Consideringa Stress Linearization," KPVP, Vol 4, pp. 22-29.
  8. European Commission Joint Research Center, 1999,“The Design by Analysis Manual,” EPERC.
  9. Hechmer, J.L. and Hollinger, G.L., 1998, “3D Stress Criteria Guidelines for Application,” WRC Bulletin 429.
  10. Hollinger, G. and J.Hechmer, 2000, “Three Dimensional Stress Criteria-Summary PVRC Project,” Journal ofPressure Vessel Technology, Vol.122.
  11. Mathmatica v3.0 online documentation.
  12. The American Society of Mechanical Engineers,2007, 2007 ASME Boiler & Pressure Vessel Code,Section II, Part D, Properties (Customary) Materials.