• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1147-1151
• /
• 2018

As personal users create and share lots of contents at any time and any places, new networking architecture such as content centric networking (CCN) has emerged. CCN utilizes content name as a packet identifier, not address. However, current CCN has a limitation for content source mobility management. The movement of content sources cause long delivery latency and long service disruption. To solve that, a hierarchical mobility management was was proposed. However, the hierarchical mobility management scheme has still the loss of interest packets and long handoff latency. So, this paper presents the hybrid hierarchical mobility management in mobile CCN environements to reduce both the loss rate of interest packets and the handoff latency. It is shown from the performance evaluations shows that the proposed scheme provides low loss rate of control message.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1361-1363
• /
• 2005

In this paper, we report on the performance stability of solution processible OTFT devices with Au/Ti and ITO source-drain (S/D) electrodes. It appears that the contact resistance of the S/D electrode strongly affects the stability of OTFT devices. Interestingly, the devices with the Au/Ti electrode showed lower mobility than those with the ITO (S/D) devices. The field effect mobilities of the devices with the Au/Ti and ITO electrodes were 0.06, and $0.44cm^2/Vs$, respectively. However, the mobility of the device with the Au/Ti electrode was increased up to $0.26cm^2/Vs$ after 2 weeks, while the mobility of the device with ITO electrode was slightly decreased down to $0.41cm^2/Vs$. The experimental data show us that ITO could be used as the S/D electrode for low-cost OTFT devices.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.4
• /
• pp.1217-1226
• /
• 2000

Traditionally, Mobile Teletraffic model consists of two sub-models, i.e. the network traffic model and the traffic source model. In this paper, we present the traffic source model by developing MobCall (Mobile Call Simulator) which analyses various mobile wireless environments based on regional characteristics that the base stations are located. User mobility is presented by regional average vehicle speeds and the transportation share rate. Moreover, the user mobility on subway, which is increasing in urban area, is considered in MobCall. And also, user's movements on highway are considered in MobCall. The object-oriented simulation platform, C++SIM, is used to implement MobCall. Using MobCall, the accumulated number of calls in residential and commercial regions, the handoff rate with respect to traffic sources of Seoul, the handoff rate on highway, and the handoff rate according to the call duration are presented. MobCall enables the simulation of dynamic handoff buffering and functional entity control of one base station according to the changes in user's calling pattern at the design phase. Also, when a new town is under construction by a detailed plan, MobCall is used to design the mobile network with regional characteristics and user mobility considered.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1288-1291
• /
• 2007

We investigated the effect of Cr thickness on the electrical properties of triisopropylsilyl pentacene organic thin-film transistor (OTFT) employing suspended source-drain electrode. With Cr thickness of 10 nm, the field-effect mobility, on/off ratio and subthreshold slope were $0.017\;cm^2/Vs$, $8.78\;{\times}\;10^3$ and 10 V/decade, respectively. By increasing the Cr thickness to 100 nm, the fieldeffect mobility was increased to $0.032\;cm^2/Vs$, on/off ratio to $1.12{\times}10^5$ and subthreshold slope to 1 V/decade.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1312-1314
• /
• 2007

The effect of gate insulator surface treatment on electrical characteristics of bottom contact (BC) and suspended source/drain (SSD) organic thinfilm transistors (OTFTs) was studied. Triisopropylsilylethynyl pentacene was used as an active material and was printed by ink-jet printing method. In case of the BC OTFTs, threshold voltage was shifted from positive to near zero, and the fieldeffect mobility was increased when the gate insulator surface was treated with hexamethyldisilazane. However, in case of SSD OTFT, threshold voltage shift was not observed and the field-effect mobility was decreased.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.81-84
• /
• 2004

Required characteristics of poly-Si TFT's are investigated for the implementation of analog circuits to be integrated on System-on-Glass (SoG). Matching requirements on resistor values, threshold voltage and mobility of poly-Si TFT's are derived as a function of the resolution of display system. Effective mobility of poly-Si TFT's required for the realization of source driver is analyzed for various panel sizes.

• Journal of Information Display
• /
• v.5 no.4
• /
• pp.1-6
• /
• 2004

In this paper, we investigate on the characteristics of poly-Si TFTs reuired for the implementation of analog circuits to be integrated with System-on-Glass (SoG). Matching requirements in terms of resistor values, threshold voltage and mobility of poly-Si TFTs are derived as a function of the resolution of display system. Effective mobility of poly-Si TFTs required for the realization of source driver is analyzed for various panel sizes.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.6
• /
• pp.736-741
• /
• 2005

The highly popular algorithm to determine routing path for the multi-hopping wireless sensor network is DSR(Dynamic Source Routing), which is one of the Demand-Driven way to makes the route only when there is a request for sending data. However, because DSR attaches the route's record on the sending packet, the bigger number of sensor node is, the heavier packet in DSR becomes. In this paper, we try to propose the new optimal routing path selecting algorithm which does not make the size of packet bigger by using proper routing table even though the number of sensor node increases, and we try to show our algorithm is more stable and reliable because it is based on the cost function considering some network resources of each sensor node such as power consumption, mobility, traffic in network, distance(hop) between source and destination.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.E1
• /
• pp.9-18
• /
• 2006

Aerosol hygroscopic properties were measured by a tandem differential mobility analyzer (TDMA) system during the Aerosol Characterization Experiment (ACE)-Asia campaign from 31 March to 1 May 2001. Two high flow differential mobility analyzers (DMAs) were used to maximize the count rate on board the Center for Interdisciplinary Remotely Piloted Aircraft (CIRPAS) Twin Otter aircraft. Hygroscopic growth factor distributions of particles having initial dry nanoparticle diameters of 0.040, 0.059, 0.086, 0.126, 0.186, 0.273, 0.400, and $0.586{\mu}m$ were measured during 19 research flights. Data collected during 12 of those flights were used to investigate aerosol mixing state and the influence of aerosol source region on size-resolved hygroscopicity. The uniformity in size-resolved hygroscopicity was quantified to facilitate comparison between measurements made in different air masses. Hygroscopic growth factors are strongly dependent on source region and sizes. Mean hygroscopic growth factors were observed to be greatest when the air mass origin was from the south. The mean growth factors for continental sources decreased with initial size from 1.47 to 1.27 for $0.040{\mu}m\;and\;0.586{\mu}m$, but increased with initial size from 1.44 to 1.8 for $0.040{\mu}m\;and\;0.400{\mu}m$ dry diameters for marine sources.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.05a
• /
• pp.911-916
• /
• 2001

Structural acoustic modification method based on the structural mobility analysis is applied to reduce the structure-borne noise radiated from hard disk drive system. Sound intensity techniques and ODS(Operational Deflection Shape) techniques are also used in order to provide the structural acoustic information for the mobility modification. The sound intensity is for the acoustic visualization of the noise source locations, and the ODS is for the visualization of the vibration pattern and its dynamic characteristics of the noise sources. Using visualization information of sound and vibration, local structural input mobility is reduced in the frequency band of interest by designing asymmetrical wave-stringer structure in the wave-number domain as well as frequency domain. The overall sound pressure level is reduced by 4dB and its controlled sound power radiated from the disk drive is proved to under 2.8Bel in idle-spinning mode and 3.1 Bel in random-seeking mode, which are the lowest noise levels in the hard disk drive industry.