• 제목/요약/키워드: Source estimation

검색결과 1,237건 처리시간 0.027초

선수 규칙파 중 KCS의 부가저항 및 운동성능 수치해석 (Numerical Simulations of Added Resistance and Motions of KCS in Regular Head Waves)

  • 서성욱;박선호
    • 대한조선학회논문집
    • /
    • 제54권2호
    • /
    • pp.132-142
    • /
    • 2017
  • As the International Maritime Organization (IMO) recently introduced the Energy Efficiency Design Index (EEDI) for new ships building and the Energy Efficiency Operational Indicator (EEOI) for ship operation, thus an accurate estimation of added resistance of ships advancing in waves has become necessary. In the present study, OpenFOAM, computational fluid dynamics libraries of which source codes are opened to the public, was used to calculate the added resistance and motions of the KCS. Unstructured grid using a hanging-node and cut-cell method was used to generate dense grid around a wave and KCS. A dynamic deformation mesh method was used to consider the motions of the KCS. Five wavelengths from a short wavelength (${\lambda}/LPP=0.65$) to a long wavelength (${\lambda}/LPP=1.95$) were considered. The added resistance and the heave & pitch motions calculated for various waves were compared with the results of model experiments.

리튬폴리머 배터리 잔존충전용량 추정을 위한 비선형 관측기 설계 (A Nonlinear Observer Design for Estimating State-of-Charge of Lithium Polymer Battery)

  • 류석환
    • 한국지능시스템학회논문지
    • /
    • 제22권3호
    • /
    • pp.300-304
    • /
    • 2012
  • 본 논문은 리튬 폴리머 배터리 셀의 잔존충전용량을 추정하기 위한 비선형 관측기의 설계방법을 제시한다. 배터리 셀의 동적방정식은 비선형 전압원을 갖는 간단한 RC 전기회로로 모델하고 파라메터는 비선형 최적화기법을 이용하여 구한다. 관측기 이득은 제곱합 분해기법을 사용하여 오차의 동적방정식이 점근적으로 안정하고 추정오차 감소율이 설계자가 지정한 값 이하가 되도록 설계한다. 관측기의 성능을 입증하기 위하여 UDDS 전류 프로파일을 사용한 실험 데이터를 이용하여 모의실험을 수행하였다.

직접 토크제어에 의한 속도검출기 없는 유도전동기의 고성능 제어시스템 (A High-Performance Speed Sensorless Control System for Induction Motor with Direct Torque Control)

  • 김민회;김남훈;백원식
    • 전기학회논문지P
    • /
    • 제51권1호
    • /
    • pp.18-27
    • /
    • 2002
  • This paper presents an implementation of digital high-performance speed sensorless control system of an induction motor drives with Direct Torque Control(DTC). The system consists of closed loop stator flux and torque observer, speed and torque estimators, two hysteresis controllers, an optimal switching look-up table, IGBT voltage source inverter, and TMS320C31 DSP controller board. The stator flux observer is based on the combined current and voltage model with stator flux feedback adaptive control for wide speed range. The speed estimator is using the model reference adaptive system(MRAS) with rotor flux linkages for speed turning signal estimation. In order to prove the suggested speed sensorless control algorithm, and to obtain a high-dynamic robust adaptive performance, we have some simulations and actual experiments at low(20rpm) and high(1000rpm) speed areas. The developed speed sensorless system are shown a good speed control response characteristic, and high performance features using 2.2[kW] general purposed induction motor.

음식물을 통한 어린이와 그들의 어머니에 대한 PCDDs/PCDFs 섭취량 평가 (Estimation of PCDDs/PCDFs Intake for Korean Children and Their Mothers Through Daily Foods)

  • 문찬석;백종민
    • 한국환경보건학회지
    • /
    • 제33권1호
    • /
    • pp.11-15
    • /
    • 2007
  • This study was performed to evaluate the congeners of polychlorinated dibenzo-p-dioxins(PCDDS) and polychlorinated dibenzofurans(PCDFs) in Korean foods among children in Korea, in comparison with the findings in their mothers. The PCDDs and PCDFs intakes of 24-h diet duplicates were estimated from the previous Korean reports. In Korean children and their mothers of this study, major sources of lipid intake were plant-based foods(62% for children, 66% for their mothers). The women took 34% of lipid from animal sources, among which meats were leading sources of animal lipids(30%). Fish and shellfish were accounted for 4% in total lipid intake. Daily intake of PCDDs and PCDFs in the children md their mothers were 0.002-3.188 and 0.002-2.717 pg WHO-TEQ/day in animal sources and ND-0.283 and ND-0.296 pg WHO-TEQ/day in plant sources, respectively. PCDDs/PCDFs intake from animal origin was the major exposure source for both children and their mothers in Korea. Among the 17 PCDD/Fs congeners, 2,3,4,7,8-pentachlorodibenzofuran was assumed to be the effective exposure marker for diet intake.

임의의 모양을 가지는 면광원 하의 실시간 부드러운 그림자 생성 방법 (A Real-time Soft Shadow Rendering Method under the Area Lights having an Arbitrary Shape)

  • 전영재;오경수
    • 한국게임학회 논문지
    • /
    • 제14권2호
    • /
    • pp.77-84
    • /
    • 2014
  • 면광원에 의한 부드러운 그림자의 표현은 가상 장면을 보다 사실적으로 보이도록 한다. 하지만 부드러운 그림자의 계산은 매우 느리게 수행되기 때문에 실시간 3차원 응용 프로그램에 적용하기 위해서는 가속화가 요구된다. 우리는 기존의 실시간 부드러운 그림자 방법들이 가정했던 면광원의 모양과 색상을 보다 일반적으로 확장하여 임의의 모양과 색상을 갖는 면광원에 대한 부드러운 그림자 생성 방법을 제안한다. 그림자 매핑 정보를 획득할 수 있는 그림자 맵은 픽셀과 면광원 간의 가시성 검사를 근사하기 위해 사용되며 픽셀 주변의 그림자 복잡도에 따라 근사의 정도를 결정하였다. 그 결과 보다 일반적인 형태와 색상의 면광원에 대한 부드러운 그림자를 실시간에 표현할 수 있었다.

단채널 MOSFET의 열잡음 모델링을 위한 잡음 파라메터의 분석과 추출방법 (Analysis and extraction method of noise parameters for short channel MOSFET thermal noise modeling)

  • 김규철
    • 한국정보통신학회논문지
    • /
    • 제13권12호
    • /
    • pp.2655-2661
    • /
    • 2009
  • 단채널 MOSFET의 열잡음 모델링을 위한 정밀한 잡음 파라메터를 유도하고 추출했다. MOSFET의 잡음 파라메터를 계산하기 위한 Fukui모델을 단채널에서의 기생성분의 영향을 고려하여 수정하였고, 기존의 모델식과 비교하였다. 또한 소자 고유의 잡음원을 얻기 위해서 서브마이크론 MOSFET의 잡음 파라메터(최소잡음지수 $F_{min}$, 등가잡음 저항 $R_n$, 최적 소스어드미턴스 $Y_{opt}=G_{opt}+B_{opt}$)를 추출하는 방법을 제시하였다. 이러한 추출방법을 통하여 프로브패드의 영향과 외부기생소자 영향을 제거한 MOSFET 고유의 잡음 파라메터가 RF잡음측정으로부터 직접 얻어지게 된다.

Fireball로 인한 Thermal flux 예측에 관한 연구 (A Study on the Thermal Flux Estimation of Fireball)

  • 김인태;김인원;송희열
    • 한국가스학회지
    • /
    • 제4권3호
    • /
    • pp.46-52
    • /
    • 2000
  • Fireball로 인한 위험성 및 피해를 평가하기 위한 프로그램, FIRESTOR를 개발하여 Fireball로 인한 Thermal flux를 예측하였고, FIRESTOR 프로그램을 부천가스 충전소 사고를 모델로 하여, BLEVE ESTIMATOR와 상용프로그램인 Dupont 사의 SAFER와 비교 분석 하였 다. 용기압력이 일정시 Propane과 Butane의 경우 Thermal flux는 거리변화에 따라 지수함 수로 감소하였다. 거리변화에 따른 Thermal flux변화를 BLEVE ESTIMATOR, SAFER, FIRESTOR로 상호 비교한 결과 본 연구에서 연구개발한 FIRESTOR 프로그램은 SAFER 와 ESTIMATOR의 중간값으로 Dupont사의 상용프로그램인 SAFER에 근접하는 경향을 보이고 있어 우수한 프로그램으로 판단된다.

  • PDF

IDENTIFICATION OF POSSIBLE MERCURY SOURCES AND ESTIMATION OF MERCURY WET DEPOSITION FLUX IN LAKE ONTARIO FROM LAKE ONTARIO ATMOSPHERIC DEPOSITION STUDY (LOADS)

  • Han, Young-Ji
    • Environmental Engineering Research
    • /
    • 제10권6호
    • /
    • pp.306-315
    • /
    • 2005
  • Total gas phase mercury (TGM) concentrations and event wet-only precipitation for Hg were collected for nine months (from April, 2002 to Dec., 2002) at Sterling, NY on the shoreline of Lake Ontario. TGM concentrations measured in this study ($3.02{\pm}2.14\;ng/m^3$) were in somewhat high range compared to other background sites. Using simplified quantitative transport bias analysis (SQTBA) possible sources affecting high Hg concentration in Sterling was identified, and they are coal-fired power plants located in southern NY and Pennsylvania. Wet deposition measured at Mercury Deposition Network (MDN) sites including Pt. Petre and Egbert, ON were compared with data obtained at the Sterling to estimate the total mercury wet deposition flux to Lake Ontario. The wet deposition flux was calculated to be the highest at the Sterling site ($7.94\;{\mu}g/m^2$ from April, 2002 to Dec. 2002) and the lowest at the Egbert ($3.92\;{\mu}g/m^2$), due to the both the difference in precipitation depth and Hg concentration in the precipitation. The deposition measured at the Sterling site is similar to Lake Michigan deposition of $6-14\;{\mu}g/m^2$ (converted for ninth months) measured for Lake Michigan Mass Balance Study (LMMBS).

A Simple Power Management Scheme with Enhanced Stability for a Solar PV/Wind/Fuel Cell Fed Standalone Hybrid Power Supply using Embedded and Neural Network Controller

  • Thangavel, S.;Saravanan, S.
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권5호
    • /
    • pp.1454-1470
    • /
    • 2014
  • This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.

영상 분석을 이용한 수삼의 중량추정 (Estimating the Weight of Ginseng Using an Image Analysis)

  • 정석훈;고국원;이지연;이진호;서현석;이상준
    • 정보처리학회논문지:소프트웨어 및 데이터공학
    • /
    • 제5권7호
    • /
    • pp.333-338
    • /
    • 2016
  • 본 연구의 목적은 수삼 등급을 판정하는 기준 중에서 수삼의 중량을 직접 측정하지 않고 영상 분석으로 가능한 근접하게 추정하는 것이다. 이를 위해 수삼영상 취득장치를 제작하였으며 126개의 수삼샘플을 대상으로 영상을 취득하였다. 각각의 수삼샘플의 중량을 측정하고 영상분석 데이터를 이용하여 중량추정공식을 산출하는데 이용하였다. 영상분석과 파라미터 추출과정에는 C언어 기반의 Labwindows/CVI 개발 툴과 오픈소스 라이브러리 OpenCV를 이용하였다. 영상분석 과정에서 추출한 파라미터와 중량과의 상관관계를 가장 잘 표현할 수 있는 필터설정 값을 추적하여 적용하였고, 최소제곱법을 사용한 선형 회귀분석으로 선형성을 가지는 0.9162의 강한 양의 상관계수 값을 얻을 수 있었다.