• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.7
• /
• pp.924-929
• /
• 2000

This paper addresses a new technique of measuring the mean flow velocity over the cross sectional area of the pipe using sound field reconstruction. When fluid flows in the pipe and two plane waves propagate oppositely through the medium, the flow velocity causes the change of wave number of the plane waves. The wave number of the positive going plane wave decreases and that of negative going one increases in comparison to static medium in the pipe. Theoretical backgrounds of this method are introduced in detail and the measurement of mean flow velocity using the sound field reconstruction is not affected by velocity profile upstream of microphones.

• Wind and Structures
• /
• v.17 no.4
• /
• pp.435-449
• /
• 2013

The vehicle-induced aerodynamic loads bring vibrations to some of the highway sound barriers, for they are designed in consideration of natural wind loads only. A field experiment is carried out with respect to three important factors: vehicle type, vehicle speed and the vehicle-barrier separation distance. Based on the results, the time-history of pressures is given, showing identical characteristics in all cases. Therefore, the vehicle-induced aerodynamic loads acting on the highway sound barrier are summarized as the combination of "head impact" and "wake impact". The head impact appears to have potential features, while the wake impact is influenced by the rotational flow. Then parameters in the experiment are analyzed, showing that the head impact varies with vehicle speed, vehicle-barrier separation distance, vehicle shape and cross-sectional area, while the wake impact is mainly about vehicle-barrier separation distance and vehicle length.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.8
• /
• pp.410-420
• /
• 2011

The present study aims to investigate the soundscapes of Jeju olle route through the soundwalking. In order to do this, sound measurements and sound recording were undertaken at 10 points along Jeju olle route. Also, loudness of background sound and figure sound were examined. Subjective surveys were carried out using questionnaire and interviews with 32 tourists and 5 acoustical specialists in order to investigate the loudest sound, most pleasant and unpleasant sound, and impressive sound among 17 natural and artificial sounds. Additionally, laboratory experiments were achieved to evaluates sound that have been recorded at the field using same questionnaire and the results were compared with those of field experiments. As a result, the sound heard most in Jeju olle route is the sea wave sound, wind sound, automobile noise, and human voice. It was revealed that the most pleasant sound consisted of nature sound among them, and that unpleasant sounds are artificial sounds. The results of subjective test denote that unpleasant sound is affected by ratio of artificial sound and nature sound. And this also affects the assessment about the loudness of the sound. Also, it was found that the results of both field test and laboratory test are closely correlated in the evaluation of loudness of sound and unpleasant feeling.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.4 s.121
• /
• pp.289-297
• /
• 2007

SAFRS is the system designed to reproduce the harmonic sound into the space according to the environmental factors. Here the harmonic sound means the sound which judged by the subjective tests, and the methods were suggested in the former studies. In this research, SAFRS was applied into the Square of D University to evaluate and verify the effectiveness of the system and a few evaluations were carried out as follows; 1) sound perception, frequency, volume and harmony with the space, 2) images of the square and acoustic environment and 3) acoustic environment with existing sounds, fountain sound, produced sound by SAFRS, and both of them respectively. The results can be summarized as follows; 1) According to the evaluation on acoustic environment, no relationships were shown between the cognition of sounds produced by SAFRS and the frequency or volume, but inverse proportion was shown between the volume and special harmony. 2) As the result of image evaluation. the relationship between space and sound image was shown proportional only except the evaluation on main road at night time, it means that the sound proposal with the visual contents matching with the sounds would be more effective than the proposal of sound only. 3) Results of evaluation on acoustic environment showed that the cognition effect at night time was shown higher than that of day time when only the acoustic element was given and the effect was increased when the visual elements matches with the acoustic elements if both of them were given. It confirmed the harmony between visual and acoustic elements was very important.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.45-51
• /
• 2003

The ship's signal sound dispersed by air, obstacles, and noises due to absorption, reflection, and disturbances, respectively. It is one of the factors of marine casualties by misjudgment if receiving direction The last target of this study is to prevent inherent marine casualty using the analysis-evaluation techniques if the interferences of ship's signal sound. In this work, three-dimensional sound field control model is proposed to simulate various sound transmitting characteristics according to sea environments at sea The efficiency test of the model was carried out using VR-based ship simulator.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.95-105
• /
• 2013

PURPOSES: The purpose of this study is to research the influence of road traffic noise by road slope through the analysis of the field road traffic noise and determine consideration of road slope in the case of appling active noise cancellation. METHODS: This study measures vehicle's noise by the NCPX method at the three field sections such as uphill, downhill, and flatland. Total sound pressure and sound pressure level by the 1/3 octave band frequency are calculated through the raw field data. Total sound pressure level is compared by ANOVA test and T test statistically. The results obtained are compared in accordance with the road slope and the progress of the uphill section. RESULTS : The noise characteristic of early, medium, and last parts of uphill was found to be consistent when the vehicle was travelling uphill section. The result of statistical test, it was shown that total sound pressures are not different each other. According to the comparison by the geometry, sound pressure of the uphill section was higher than those of the flatland and downhill section in high frequency band. By the result of statistical test, total sound pressure are different according to geometry in the case of high vehicle speed. In the comparison result by road slope, each sound pressure level was found to be consistent in total frequency. However, total sound pressure proportionally increased according to road slope. CONCLUSIONS: It is found that the effect of road slope on noise generation was little in this experimental sites.

• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.477-484
• /
• 1999

This study aims to present proper thickness of resilient mount and pattern of chips for the improvement of impact sound isolation. To achieve this aim, field tests were performed to evaluate the performance of impact sound isolation of pilot samples using waste tire chips against light and heavy-weight impacter, which samples were installed over concrete slabs of an apartment housing. In this study, the experiments were performed by the impact sound level of floors in KS F 2810 "Method for field measurement of floor impact level". As results, a flooring structure using waste tire chips as a resilient mount, with no relation to chip's types, has enhanced performance by 1~2 degree in light impact sound isolation, while it has improvement in heavy impact sound isolation. And fiber-type chips have better performance than granule-type ones when they overlaid concrete slab with 15~20 mm of thickness. For the improvement of impact sound isolation, it is recommended that insulating materials should be applied at joints between floating floors and walls, or floating floors and a doorframes, and also waterproof papers should be used for the effective thickness of resilient mount.ent mount.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.239-242
• /
• 1998

A new real time sound field visualization technique is introduced in this study using PIV(Particle Imaging Velocimetry) technique. Small particles of which density is small enough to follow up the air flow are used for sound visualization. When the driving frequency is in the vicinity of the resonance frequency of the simplified 2-dimensional muffler system, an acoustic streaming is shown and of which velocity distribution is obtained through PIV technique. It is experimentally proved that the present technique is able to visualize and quantify the sound field's energy flow.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.6993-6997
• /
• 2014

The aim of this study was to experimentally investigate the sound quality characteristics, such as sound deflection, sound pressure level and frequency characteristics of a magnetic type speaker in an anechoic chamber to overcome the sound quality and voice-coil temperature problems. To accomplish this, the sound quality performance of the magnetic type speaker was tested according to the magnetic fluid amount and magnetic field intensity. The sound deflection, sound pressure level, and frequency characteristics were measured using the Smarrt program. As a result, at a magnetic fluid amount of 2.4 ml, the sound deflection and the sound pressure level of the magnetic type speaker were enhanced by comparing with those of the general type speaker. The frequency characteristics and the sound pressure level of the magnetic type speaker were enhanced greatly with increasing magnetic field intensity from 8.06 mT to 9.10 mT. In addition, the sound deflection of the magnetic type speaker was 0.01% lower than that of the general type speaker.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.519-524
• /
• 2013

The purpose of this study is that developing the index which evaluate sound quality of door latch and improving its sound quality through that results. For that, various operating sound of door latch was used for jury test. Loudness and sharpness related metrics are dominant in sound quality index we developed. This research investigate the main transfer path of its operating sound through sound field visualization and get conclusion that could reduce the impact sound of door latch. Therefore, we could verify sound quality improvement of modified product by using sound quality index.