• Journal of Pharmaceutical Investigation
• /
• v.31 no.3
• /
• pp.167-172
• /
• 2001

All-trans retinoic acid (ATRA), vitamin A acid, has been shown to exert anticancer activity in a number of types of cancers, particularly in acute promyelocytic leukaemia (APL). Due to its highly variable bioavailability and induction of its own metabolism after oral treatment, development of parenteral dosage forms are required. However, its poor aqueous solubility and chemical unstability give major drawbacks in parenteral administration. This study was undertaken to investigate a possibility to develop a parenteral formulation of ATRA by employing solid lipid nanoparticle (SLN) as a carrier. By optimizing the production parameters and the composition of SLNs, SLNs with desired mean particle size (<100 nm) as a parenteral dosage form could be produced from trimyristin (as solid lipid), Egg phosphatidylcholine and Tween 80 (as SLN stabilizer). The mean particle size of SLN formulation of ATRA was not changed during storage, suggesting its physical stability. Thermal analysis confirmed that the inner lipid core of SLNs exist at solid state. The mean particle size of ATRA-loaded SLNs was not significantly changed by the lyophilization process. ATRA could be efficiently loaded in SLNs, while maintaining its anticancer activity against HL-60, a well-known APL cell line. Furthermore, by lyophilization, ATRA loaded in SLN could be retained chemically stable during storage. Taken together, our present study demonstrates that physically and chemically stable ATRA formulation adequate for parenteral administration could be obtained by employing SLN technology.

• Journal of Pharmaceutical Investigation
• /
• v.28 no.4
• /
• pp.249-255
• /
• 1998

Solid Lipid Nanoparticle(SLN), one of the colloidal carrier systems, has many advantages such as good biocompatibility, low toxicity and stability. In this paper, the effects of drug lipophilicity and surfactant on the drug loading capacity, particle size and drug release profile were examined. SLNs were prepared by homogenization of melted lipid dispersed in an aqueous surfactant solution. Ketoprofen, ibuprofen and pranoprofen were used as model drugs and tweens and poloxamers were tested for the effect of surfactant. Mean particle size of prepared SLNs was ranged from 100 to 150nm. The drug loading capacity was improved with the most lipophilic drug and low concentration of surfactant. Particle size and polydispersity of SLNs were changed according to the used lipid and surfactant. The rates of drug release were controlled by the loading drug and surfactant concentration. SLN system with effective drug loading efficiency and proper particle size for the intravenous or oral formulation can be prepared by selecting optimum drug and surfactant.

• Journal of Pharmaceutical Investigation
• /
• v.40 no.6
• /
• pp.373-378
• /
• 2010

In order to develop a topical preparation which has a high occlusive property with skin moisturization, nano-structured lipid carrier (NLC) systems along with solid lipid nanoparticle (SLN) were designed. Various NLC dispersions were successfully formulated with Compritol 888 ATO as a solid lipid, Labrafil M 1944 CS as an oil, and Tween 80 as a surfactant. The increase of oil content (5 to 50%) led to the decrease in the occlusion factor in the order of SLN > NLC-5 > NLC-15 = NLC-30 > NLC-50. Particle size of lipid particulates was in the range of 100 to 160 nm. NLC-based carbogels were prepared by the employment of humectants such as urea, glycerin, and Tinocare GL to carbomer gel. NLC-30 gel formulations containing 4 or 8 % of lipid particles showed improved occlusive effect in vitro, compared to NLC-free gel base. Even though NLC-free gel base revealed comparable occlusion effect by itself, the occlusion factor of 4 % NLC-30 gel was about 2-fold higher than that of NLC-free gel base.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.2
• /
• pp.125-135
• /
• 1996

Solid lipid nanoparticles(SLN) are particulate systems for parenteral drug administration and suitable for controlled release. SLN were prepared by homogenization process. Dispersion at increased temperature (molten lipid) was performed to yield SLN loaded with lipophilic drugs. Tetracaine base, lidocaine base, prednisolone, methyltestosterone and ethinylestradiol were used as model drugs to access the loading capacity and to study the release behavior. To investigate production parameters(lipids, surfactant concentration, homogenizing rpm) in the formation of SLN, particle size was performed by laser diffraction analysis. The mean particle size of SLN with stearic acid or trilaurin was below 1 micron. By decreasing the particle size and increasing the surfactant concentration, the release rate was increased especially in the case of highly lipophilic drug loaded SLN. Methyltestosterone or ethinylestradiol loaded SLN showed a distinctly prolonged release over a few days.

• Macromolecular Research
• /
• v.16 no.8
• /
• pp.682-685
• /
• 2008

The aim of this work was to develop and evaluate solid lipid nanoparticles (SLN) containing all-trans-retinoic acid (ATRA) for topical delivery. SLN composed of coconut oil and curdlan improved the suspension instability of ATRA in aqueous solution. The photodegradation of ATRA by light was reduced by incorporation in SLN. The loading efficiency of ATRA in SLN was higher than 95% (w/w). The amounts of ATRA released from SLN at $4^{\circ}C$ and at $37^{\circ}C$ were less than 15% and more than 60% (w/w) for 96 h, respectively. The ATRA-loaded SLN can be used as a potential carrier for topical delivery.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.39-43
• /
• 2008

Cyclosporin A (CyA), a potent immunosuppressive drug used in allogeneic transplants and autoimmune disease, is a typical water-insoluble drug. Recently, nanoparticle carriers were investigated to improve the intestinal absorption of drugs. In this study, CyA-loaded nanostructured lipid carriers (NLCs) were prepared from a hot o/w emulsion using the high pressure homogenization method. The NLCs were consisted of cationic lipids, solid lipids, liquid lipids (oils), surfactant and stabilizer. Encapsulation efficiency of CyA in NLCs was approximately 71%. The average particle size and zeta potential of NLCs were below 250 nm and above +40 mV, respectively. The morphology of NLCs was confirmed by transmission electron microscopy (TEM) analysis. Compared to the CyA powder, higher in vitro release of CyA from NLCs was observed after burst release within 30 min. Thus, CyA-loaded NLCs could be applied not only for parenteral route but also for gastrointestinal administration, which needs further investigation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.34 no.1
• /
• pp.15-23
• /
• 2008

This study is on encapsulation of a new whitening agent, LA-PEG using solid lipid nanoparticle(SLN) method, one of nanoparticle preparation method. Classical method has high capsulation efficiency for hydrophobic compounds but has demerit of low capsulation efficiency($2{\sim}3%$) for hydrophilic compounds. Purpose of this study is preparation of SLN that has higher skin penetration effect compared with general liposome, and also has higher encapsulation efficiency of hydrophilic compounds. For SLN preparation, coconut oil, macadamia oil, and jojoba oil were used. As a result, SLN preparation using coconut oil(include LA-PEG) has the most high encapsulation efficiency and also has the smallest average particle size(270 nm). SLN prepared with macadamia oil and 1% of Tween 60 has the largest particle size. Base made with coconut oil and 2% of Tween 60 showed the fastest release and base made with macadamia oil and 2% of Tween 20 showed the latest release.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.2 s.51
• /
• pp.141-146
• /
• 2005

Unstable cosmetic active ingredients could rapidly break down in chemical and photochemical process. Therefore, it has become a very important issue to encapsulate active ingredient for the stabilization. 7-Dehydrocholesterol (7-DHC), a precursor of vitamin $D_3$, has been shown to increase levels of protein and mRNA for heat shock protein in normal human epidermal keratinocytes. However, topical dermal application of 7-DHC is restricted due to its poor solubility and chemical unstability. In this study, 7-DHC was incorporated into nano-emulsion (NE), solid lipid nano-particle (SLN), and chitosan coated solid lipid nano-particle (CASLN), respectively. In order to prepare NE and SLN dispersion, high-pressure homogenization at temperature above the melting point of lipid was used Hydrogenated lecithin and polysorbate 60 were used as stabilizer for NE and SLN. CASLN was prepared by high speed homogenizing after adding chitosan solution to the SLN dispersion and showed positively charged particle properties. Decomposition rate of 7-DHC in NE, SLN and CASLN was studied as a function of time at different temperature. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies were performed to characterize state of lipid modification. It appeared that CASLN is the most effective to stabilize 7-DHC and may be used for a useful topical dermal delivery system.

• KSBB Journal
• /
• v.19 no.3
• /
• pp.178-186
• /
• 2004

The aim of this study was to investigate the skin-whitening effect of okyong-san and to develop new drug delivery carrier The extracts of okyong-san were found to have the whitening effect and Eudragit$\^$ⓡ/ L 100-55 (EUD) coated solid lipid nanoparticle (E-SLN) was prepared by solvent evaporation method and melt dispersion technique. As a result, E-SLN have a 144-170 nm of particle size, spherical shape, and 33-41% encapsulation efficiency, After release test in vitro, release profile of E-SLN depended on pH and temperature. Lastly, closed patch test and skin-whitening test was peformed clinically. In conclusion, test sample had non-stimulation and high % whiteness. The results suggest that okyong-san and E-SLN is useful as cosmeceuticals for whitening cosmetics.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.655-659
• /
• 2003

Solid lipid nanoparticle (SLN) system has been attracted increasing attention during last few years as a potential drug delivery carrier However, the SLN have disadvantage of low encapsulation efficiency for hydrophilic drug. In this study, for increase it's encapsulation efficiency, we prepared the $Eudragit^{\circledR}$ L100-55 (eudragit) coated SLN(E-SLN) based on solvent evaporation method and melt dispersion technique, and analyzed their physicochemical properties in terms of particle size, morphology, and encapsulation efficiency. As a result, they have a ${\pm}150$ nm particle size, spherical shape, and $10^{\sim}25$ % loading efficiency. SLN consists of coconut oil as core material, ascorbic acid and okyong-san as hydrophilic drug.