• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1060-1068
• /
• 1994

Stable zirconia sol was prepared from zirconium butoxide Zr(OC4O9)4 as a precursor and ethylacetoacetate(EAcAc) or diethylene glycol(DEG) as a chelating agent under ambient agent under ambient atmosphere by Sol-Gel process. The sythesized sol was coated on 304 stainless steel substrate by dip coating, thereafter zirconia film could be obtained by heat-treatment at $600^{\circ}C$. The characteristics of coating film were determined by FT-IR, XRD, and ellipsometion peak represented Zr-O-Zr bonding of tetragonal phase was shown at 470cm-1. Crystallization of zirconia gel and film from amorphous state to tetragonal phase started at 40$0^{\circ}C$, and then transformed into monoclinic phase around $700^{\circ}C$. Zirconia film coated on 304 stainless steel substrate showed relatively low porosity of 16% when it was coated with 0.4M zirconia sol and thereafter heat-treated at 80$0^{\circ}C$ and the film was densified continuously up to 90$0^{\circ}C$. The zirconia film of 10 nm thick acted as a protective layer against oxidation up to $700^{\circ}C$.

• 한국전기전자재료학회논문지
• /
• 제32권3호
• /
• pp.246-251
• /
• 2019

A solvent free, highly concentrated silica-acryl monomer hybrid sol was synthesized using aqueous colloidal silica as a precursor. The effects of the silica particle size, type of surface treatment agent employed, and silica content on the formation of the hybrid sol were systematically studied. The optical and physical properties of the coating solution prepared using the hybrid sol were also characterized. The viscosity of the hybrid sol tended to decrease as the particle size of the silica and the molecular weight of the surface treatment agent increased. The PET substrate coated with MPTMS-Mix (mixture, 70 wt%) solution showed the highest surface hardness (6 H) and low surface roughness ($Ra=0.044{\mu}m$), which could be attributed to an increase in packing density caused by the infiltration of small particles into the pores formed between larger particles.

• 한국세라믹학회지
• /
• 제27권1호
• /
• pp.127-135
• /
• 1990

Characteristics of the sol-gel derived (Ba1-xPbx)TiO3 powders are compared with those of powders prepared by the calcining ofmixed oxides method (CMO) and molten salt synthesis method(MSS). The sol-gel derived powder has a higher surface area (50$m^2$/g) than those of CMO(3.8$m^2$/g) and MSS(11.5$m^2$/g) derived powders. In the sol-gel method, the (Ba1-xPbx)TiO3 was synthesized at $600^{\circ}C$ for 1hr, indicating that this method has a crystalline temperature 20$0^{\circ}C$-30$0^{\circ}C$ lowr than those of the CMO and MSS methods.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.102-105
• /
• 2011

This work describes the characteristics of zinc oxide (ZnO) thin films formed on a polycrystalline (poly) 3C-SiC buffer layer using a sol-gel process. The deposited ZnO films were characterized using X-ray diffraction, scanning electron microscopy, and photoluminescence (PL) spectra. ZnO thin films grown on the poly 3C-SiC buffer layer had a nanoparticle structure and porous film. The effects of post-annealing on ZnO film were also studied. The PL spectra at room temperature confirmed the crystal quality and optical properties of ZnO thin films formed on the 3C-SiC buffer layer were improved due to close lattice mismatch in the ZnO/3C-SiC interface.

• 한국정보통신학회논문지
• /
• 제9권7호
• /
• pp.1491-1496
• /
• 2005

[ $Pb_{0.72}La_{0.28}TiO_3$ ] (PLT(28)) 박막을 sol-gel 법을 이용하여 제작한 후, 그 특성을 조사하여 ULSI DRAM 의 캐패시터 절연막으로서의 적용 가능성을 연구하였다. Sol-gel 법의 출발 물질로는 acetate 계를 사용하였다. TGA-DTA 분석을 통하여 PLT(28) 박막의 sol-gel 법에 의한 공정 조건을 확립하였다. 매 coating 후 $350^{\circ}C$ 에서 drying 하고, 마지막으로 $650^{\circ}C$ 에서 annealing 하여 $100\%$ perovskite 구조를 가지는 치밀하고 crack 이 없는 PLT(28) 박막을 얻었다. $Pt/Ti/SiO_2/Si$ 기판 위에 PLT(28) 박막을 형성하여 전기적 특성을 측정하였다. 그 결과 유전 상수와 누설전류밀도가 각각 936 과 $1.1{\mu}A/cm^2$ 으로 측정되었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.865-868
• /
• 2005

$Pb_{0.72}La_{0.28}TiO_3$ (PLT(28)) 박막을 sol-gel 법을 이용하여 제작한 후, 그 특성을 조사하여 ULSI DRAM 의 캐패시터 절연막으로서의 적용 가능성을 연구하였다. Sol-gel 법의 출발 물질로는 acetate계를 사용하였다. TGA-DTA 분석을 통하여 PLT(28) 박막의 sol-gel 법에 의한 공정 조건을 확립하였다. 매 coating 후 350$^{\circ}C$에서 drying 하고, 마지막으로 650$^{\circ}C$에서 annealing 하여 100% perovskite 구조를 가지는 치밀하고 crack 이 없는 PLT(28) 박막을 얻었다. Pt/Ti/SiO$_2$/Si 기판 위에 PLT(28) 박막을 형성하여 전기적 특성을 측정하였다. 그 결과 유전 상수와 누설전류밀도가 각각 936 과 1.1${\mu}$A/cm$^2$ 으로 측정되었다.

• Corrosion Science and Technology
• /
• 제14권2호
• /
• pp.64-75
• /
• 2015

Single $TiO_2$ coating prepared by sol-gel process usually experiences cracks in coating layer. In order to prevent cracks, an inorganic-organic hybrid $TiO_2-SiO_2$ coating was synthesized by combining precursors with an organic functional group. Five different coatings with various ratios of (1:8, 1:4, 1:1, 1:0.25 and 1:0.125) titanium alkoxide (TBOT, Tetrabutylorthotitanate) to organo-alkoxysilane (MAPTS, ${\gamma}$-Methacryloxy propyltrimethoxysilane) on carbon steel substrate were made by sol-gel dip coating. The prepared coatings were analyzed to study the coating properties (surface crack, thickness, composition) by scanning electron microscope (SEM), focused ion beam (FIB), and Fourier transform infrared spectroscopy (FT-IR). Potentiodynamic polarization tests and electrochemical impedance spectroscopy (EIS) were also performed to evaluate the corrosion characteristics of the coatings. Crack free $TiO_2-SiO_2$ hybrid coatings were prepared with the optimization of the ratio of TBOT to MAPTS. The corrosion rates were significantly decreased in the coatings for the optimized precursor ratio without cracks.

• 한국세라믹학회지
• /
• 제32권4호
• /
• pp.516-524
• /
• 1995

In this study, to prepare the dielectric (Ba, Sr)TiO3 thin films by the sol-gel process, Titaminum (IV) sio-propoxide (Ti[OCH(CH3)2]4), Ba and Sr acetate were used for sol and thin films were prepared by dip-coating process. Stability of sol decreased with the increase of Sr, and thickness of thin films were obtained 0.13~0.17${\mu}{\textrm}{m}$ by 1 coating cycle. Transmittance of amorphous thin films heated at 500 and 55$0^{\circ}C$ was very good, and crystallization tendency of thin films according to heat-treatment temperature and crystallization characteristics of thin films heated at 11$0^{\circ}C$ for 3 hrs were analysed. As a result, good perovskite structure was obtained higher than 100$0^{\circ}C$, and tetragonality of thin film was decreased but pyrochlore was formed with increasing Sr. In case of addition to substitute 0.4mol% Sr for Ba, dielectric constant was 288 and loss factor (tan $\delta$) was 0.04.

• 한국세라믹학회지
• /
• 제29권1호
• /
• pp.29-34
• /
• 1992

Phase transition, dielectric properties, and leakage current characteristics of Ta2O5 thin film fabricated by sol-gel process with tantalum penta-n-butoxide were studied as a function of annealing temperature in O2 atmoshpere. Although Ta2O5 thin film annealed at temperatures below 700$^{\circ}C$ for 1 hr was amorphous, it was crystallized to ${\beta}$-Ta2O5 of orthorhombic phase by annealing at temperatures higher than 750$^{\circ}C$. With increasing annealing temperature from 500$^{\circ}C$ to 900$^{\circ}C$, dielectric constant of sol-gel processed Ta2O5 thin film was changed from 17.6 to 15.3 due to the increase of SiO2 thickness at Ta2O5/Si interface. For Ta2O5 thin film annealed at 500$^{\circ}C$ to 800$^{\circ}C$ for 1 hr in O2 atmosphere, leakage current was remarkably reduced and breakdown strength was increased with higher annealing temperature. For Ta2O5 film annealed at 800$^{\circ}C$, breakdown did not occur even at electric field strength of 30${\times}$105V/cm and leakage current was maintained lower than 10-8A/$\textrm{cm}^2$.

• 한국세라믹학회지
• /
• 제24권6호
• /
• pp.561-571
• /
• 1987

In case of glass ceramics and powder preparation from the metalakoxide solutions, metalakoxide solutions with a various species of alkoxy groups have unique characteristics. Therefore, in this study, the mixing ability of homogeneous sol, gel morphology and physical properties of gels were investigated by the changes in terms of the different four alkoxy groups, CH3-, C2H5-, i-C3H7-n-C4H9-, along with the catalyst for the purpose of the observation about the homogenous transition range from sol to gel. As a result, when the fixed condition was mol ratio of H2O/Si(OR)4=2.0 and variables were batch composition and addition amount of catalyst, the characteristics of Tetra-normal-Butoxysilane and Tetra-iso-propoxysilane systems had very narrow sol-gel conversion region than Tetramethoxysilane and Tetraethoxysilane system. And silicon-alkoxide, systems having narrow sol-gel conversion region were enlarged by addition of catalyst. In viewpoint of the weight loss of gel produced by hydrolysis of silicon alkoxide systems with different four alkoxy groups, the amounts of weight loss of gel containing large molecular alkoxy groups were much more than those of small molecular alkoxy group.