• Journal of the Korea Society for Simulation
• /
• v.17 no.4
• /
• pp.133-142
• /
• 2008

AGV systems are widely used to increase the flexibility and the efficiency of the material handling systems. AGV systems are one of critical factors which determine the overall performance of the manufacturing systems. To this end, the optimal design for AGV systems is essential. Commercial simulation software is often used as an analysis tool during the design of AGV systems, however a series of procedures are desirable to simplify the analysis processes. In this paper, we present and develop the architecture for unidirectional AGV systems simulator which is able to consider approximate optimal unidirectional flow path and various operational parameters. The designed AGV systems simulator is based on JAVA, and it is developed to support designing approximate optimal unidirectional network by using Tabu search method. In addition, it enables users to design and evaluate AGV systems and to analyze alternative solutions easily. Simulation engine is consists of layout designer, AGV operation plan designer, and integrated AGVS layout designer. Users enter their system design/operation information into input window, then the entered information is automatically utilized for modeling and simulating AGV systems in simulation engine. By this series of procedures, users can get the feed back quickly.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.113-120
• /
• 2005

This paper presents the development of the design of the robot element. Robot element design is an important part of robot design since it decides the performance and life time of the robot. It is necessary that the robot kinematics and the robot dynamics are accomplished to design the robot elements. The robot kinematics and dynamics determine the design parameters of the element. We developed a robot element design program with which a designer can design the robot element with convenience and reliability. The program is composed of motor, harmonic driver and ball-screw design. The program is founded on the virtual robot design program. The virtual robot design program is the powerful software which may be used to solve various problems of the robot kinematics and dynamics. The robot element design program may be used to calculate the design parameters of the element that are necessary to design robot element. Therefore, the designer can decide upon the available robot elements available to perform the objective of the robot. The robot element design program is expected to increase the competitiveness and efficiency of the robot industry.

• Journal of KIISE:Software and Applications
• /
• v.33 no.10
• /
• pp.868-876
• /
• 2006

2D input data have to be converted into 3D data by means of some functions and menu system in 2D input modeling system. But data in 3D input system for virtual spatial design can be directly connected to the 3D modeling data. Nevertheless, efficient surface modeling and deformation algorithm for the 3D input modeling system are not proposed yet. In this paper, problems of conventional NURBS surface deformation methods which can occur when applied in the 3D input modeling system are introduced. And NURBS surface deformation by 3D target curves, in which the designer can easily approach, are suggested. Designer can efficiently implement the virtual spatial sketching and design by using the proposed deformation algorithm.

• Fashion & Textile Research Journal
• /
• v.1 no.2
• /
• pp.119-126
• /
• 1999

The purpose of this study was to serve as a basis for the creation of new design. For attaining the purpose, an investigation was made into the actual condition or problems of domestic and foreign fashion design, and fashion design information was acquired from the Internet. Then, taking the acquired information as the basic data for merchandising, an attempt was made to work out an outline by using the Corel-Trace program, a widely-used computer software, and to modify it by using the Corel-Draw program. The findings of this study were as below: 1) The informations provided by domestic home-pages were largely made up of fashion news and articles on the trend of fashion, but included few of picture report. Almost all of them weren't developed into a database by item or detail. The foreign fashion design web-site were numerous in number, providing diverse information. They offered not only moving images or picture report on fashion show, leading models, photo gallery or fashion trend, but up-dated data everyday. 2) A way to create a design to meet a designer's target is recommended in this study. At first, the fashion information acquired through computer network would be handled by the Corel-Trace program. After Bitmap image would be converted into Vector image, that would be modified by the Corel-Draw program to create a design to suit a designer's target.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.20-26
• /
• 2021

Recent systems contain hardware and software components together for faster execution speed and less power consumption. In conventional hardware and software co-design, the ratio of software and hardware was divided by the designer's empirical knowledge. To find optimal results, designers iteratively reconfigure accelerators and applications and simulate it. Simulating iteratively while making design change is time-consuming. In this paper, we propose a hardware and software co-design platform for energy-efficient FPGA accelerator design. The proposed platform makes it easy for designers to find an appropriate hardware ratio by automatically generating application program code and hardware code by parameterizing the components of the accelerator. The co-design platform based on the Vitis unified software platform runs on a server with Xilinx Alveo U200 FPGA card. As a result of optimizing the multiplication accelerator for two matrices with 1000 rows, execution time was reduced by 90.7% and power consumption was reduced by 56.3%.

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.244-249
• /
• 2009

Designing an ozone contactor is complicated because the residual ozone, log C. parvum inactivation, and bromate formation should be optimized with fluctuating water quality. OCM software was developed to assist a plant designer or an operator to fulfill the sophisticated optimization required in the design or operation of a new or an existing plant. In this article, numerical simulations were carried out using the OCM software for the design of a new ozone contactor under diverse design factors (i.e., three pHs, three temperatures, low and high dispersion numbers, and four and ten cells with complete mixing) with kinetic parameters obtained from the sand-filter effluent of a water treatment plant treating water from the Paldang impoundment. The results of the simulation suggested that a high residual ozone concentration at low pH and low temperature would be challenging, and PFR-like hydrodynamics could lower the residual ozone concentration. The inactivation of C. parvum oocysts increased at a lower pH. A lower dispersion number and more cell division increased the inactivation efficiency. Bromate was instantaneously formed during the initial ozonation stage. The effluent concentration was much lower than the regulatory levels imposed by the USEPA because of the low bromide level in raw water.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.12
• /
• pp.2092-2100
• /
• 2003

Sensitivity information has been used for linearization of nonlinear functions in optimization. Basically, sensitivity is a derivative of a function with respect to a design variable. Design sensitivity is repeatedly calculated in optimization. Since sensitivity calculation is extremely expensive, there are studies to directly use the sensitivity in the design process. When a small design change is required, an engineer makes design changes by considering the sensitivity information. Generally, the current process is performed one-by-one for design variables. Methods to exploit the sensitivity information are developed. When a designer wants to change multiple variables with some relationship, the directional derivative can be utilized. In this case, the first derivative can be calculated. Only small design changes can be made from the first derivatives. Orthogonal arrays can be used for moderate changes of multiple variables. Analysis of Variance is carried out to find out the regional influence of variables. A flow is developed for efficient use of the methods. A software system with the flow has been developed. The system can be easily interfaced with existing commercial systems through a file wrapping technique. The sensitivity information is calculated by finite difference method. Various examples are solved to evaluate the proposed algorithm and the software system.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.8
• /
• pp.165-171
• /
• 2000

In this study the 4-way spool valve characteristics are clearly defined and clearly defined and proposed new type of spool valve. This paper presents governing equations of the flow through clearances between sleeve and spool as a model of orifice flow for null characteristics analysis and programmed analysis software of it. This software is possible to basically analysis that not only which case of open center closed center or critical center but _ -displacement of spool lab position boundary region and spool opening of the valve and to estimate the pressure variation in the spool and external leak flow variation. We are convinced that the scale of load pressure difference is changed as lab condition of valve and this scale is changed with boundary point on the annular clearance. It is vary useful to designer and user of spool valve with this design data and analysis software.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.325-340
• /
• 2016

Geodesign was suggested by Dangermond(2009) as a next paradigm of GIS to be a future basis for spatial planning and design. Ko(2015) also suggested a geodesign methodology that uses spatial information from a landscape designer's perspective. Spatial planning and design fundamentally require creativity and efficiency but Ko's methodology did not include the creativity aspect. To complement the deficiency, this paper expand the research scope to deal with a designer's cognitive limits and to provide better experiences for the landscape designers. An interface was designed to improve the designer's creativity based on interactions that were derived from a script of landscape design. The expanded methodology for both efficiency and creativity is suggested for the interface by analyzing preceding researches. ESRI's GeoPlanner for ArcGIS, as a first geodesign software, is compared to improve the interface in terms of creativity. One of the difficulties as a thesis is that it is not easy to measure the improvement of design creativity physically and quantitatively. This paper tried to eliminate any stumbling block in supporting creativity and to help designers find new orders in design subconsciousness and to reach a new concept. In addition, the interface to express instantaneous design ideas would be a guide to overcome the designer's cognitive limits.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.219-232
• /
• 2005

Moderns are living within flood of web contents, animation, reflex data etc. as well as sight, product, environment design. There fore, modern consumer has much options. Designer must provide various result for consumer for this reason. And must invent new sensitivity and propose to consumer. As purpose of this MCC sensitivity palette research takes advantage of the most sensitive color, do. Because applying correct sensitivity more than when design with matter already settled, rid private prejudice, and is thing to convey design intention exactly to user. Excellent culture contents must be able to equip international color design sensitivity. MCC sensitivity palette research studies and carries on the head emotion and sensitivity language that is nationality first, and collect End arranged sensitivity adjective through data analysis and picture data analysis that is the next time research leader Munheonjeok. And distributed collected adjective equally, and arrange distributed adjective by field of each sensitivity and collect system. Do 3 colors, 4 colors color scheme in selected sensitivity adjective and completed Simheom version. Result of beta version research to color specialist and designer last digital palette through question and inquiry compose. Through this process, completed more real and correct digital color sensitivity palette. Completed color scheme is operated in www.mcdri.net on web, and also programs to windows base and developed to software. MCC color scheme palette that research result is made includes sensitivity data database. This database can use directly in industry and continuous development is available. Software can search color scheme in language and idea development through classification search that use 3 attributes of color is available there is cough data of each output device different color error.