• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.61-64
• /
• 1999

The turbo code appropriate to IMT-2000 is known to have a good performance whenever the size of frame increases. But it is not appropriate to a sort of video service to need real time because of decoding complexity and long delay time by the size of frame. Therefore this paper proposes decoding decision algorithm of short frame in which soft output is weighted according to iteration number in turbo decoder. Performance of the proposed algorithm is analysed in the AWGN channel when short length of frame is 100, 256, 640. As the result. it is appeared that the proposed decoding decision algorithm has improved in BER other than in the existing MAP decoding algorithm.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.51-54
• /
• 2000

We are concerned with processing methods of the measurement values of sensors in the control system. When some faults happen to sensor components, the measurement value of sensors cause the malfunction of the plant. So it is necessary to detect and reduce the influence of faults to control with reliability for the overall system. The sensor status must be always good for best demonstration of the controller performance. A self-validating sensor detects the sensor state from the measurement value, reconstruct a soft sensor and can improve reliability of the sensor. If sensor faults, the sensor is detected and reconstructed with the best estimate from its correlation to other sensors and historical data. It is applied to the control of a flexible link system with the sensor fault problems in the light sensor module for position to show the applicability. In this paper, we propose a digital controller which reduces deflection of the moving set-point by reconstructing output of a sensor when the sensor fault is detected.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.102-106
• /
• 2003

This paper describes novel low-power high-speed flip-flop called dual edge-triggered NAND keeper flip-flop (DETNKFF). The flip-flop achieves substantial power reduction by incorporating dual edge-triggered operation and by eliminating redundant transitions. It also minimizes the data-to-output latency by reducing the height of transistor stack on the critical path. Moreover, DETNKFF allows negative setup time to provide useful attribute of soft clock edge by incorporating the pulse-triggered operation. The proposed flip-flop was designed using a $0.35{\;}\mutextrm{m}$ CMOS technology. The simulation results indicate that, for the typical input switching activity of 0.3, DETNKFF reduces power consumption by as much as 21 %. Latency is also improved by about 6 % as compared to the conventional flip-flop. The improvement of power-delay product is also as much as 25 %.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.43-45
• /
• 2006

대부분의 컨버터들은 초기 기동시에 MOSFET 전류와 전압의 과도한 상승을 막아주기 위해서 Soft Start 기능을 갖고 있다. 하지만 제어기 내부의 지연시간이나 LEB(Leading Edge Blanking) 시간 등으로 인해 MOSFET은 무시할 수 없는 상당한 기간의 최소 턴온 시간(Minimum Turn-on Time)을 갖게 되고, 이로 인해 드레인 전류가 과도하게 상승하는 현상을 보이게 된다. 본 논문에서는 이런 현상이 발생할 수 있는 초기 기동이나 출력단 단락시에 과도한 드레인 전류의 상승을 막아주는 방법을 제시하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.480-484
• /
• 2002

A new active lossless snubber for half-bridge dual converter(that is called 'dual converter') is proposed in this paper. It features soft switching(ZVS) as well as turn-off snubbing in both main and auxiliary switches. As it uses parasitic components, such as leakage inductances and switch output capacitances etc, it helps the dual converter to operate at the higher frequency with a higher efficiency and smaller size reactive components. The operational principle, theoretical analysis, and design consideration are presented. To confirm the operation, features and validity of the proposed circuit, simulated results from an 1kW, 24V/DC-250V/DC are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.49-49
• /
• 2000

Sensors are used to measure the states in need for control in a closed-loop system. Accuracy, reliability, stability of sensors are closely related to the controller performance. In case of sensor faults, they are detected by examining the sensor output values and the major values of the system. And then the types of the faults are recognized by the analysis of symptoms of faults. In this paper, a self-validating sensor is applied to the control of an aerodynamic plant system with the sensor fault problems in the potentiometer module for exact positioning to show the applicability. We propose a digital controller can provide a satisfactory loop performance even when the sensor faults occur.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.868-873
• /
• 2008

In this paper, we analyze the burst error performance of LDPC codes on perpendicular magnetic recording(PMR) channel. When burst error is generated on PMR channel, we use channel state information(CSI) to set the LLR information of channel detector zero. We consider the rate 0.94 LDPC codes and use SOVA as channel detector with low complexity.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1169-1170
• /
• 2006

We made a high-speed motor and a DC brush-less motor for factory automation (FA) to investigate applicability of powder magnetic core to motor application, and compared those performances with the similar motors having conventional electro magnetic steel core. Permeability and saturated magnetization of powder magnetic core are less than those of elect romagnetic steel core, however output performances of each core motor are almost the same. The FA motor with powder magnetic core using three-dimensional magnetic circuit showed higher torque than the same volume motor with electromag netic steel core.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.459-462
• /
• 2005

Recently, the PDP is the most remarkable media for a next generation display device. But the PDP is a high power consumption device. It is to required a high efficiency power supply. We reported the experimental result the high efficiency PDP power supply for 550w class. The proposed converter is quasi-resonant flyback topology, it achieves soft-switching in the single-switch flyback converter. As a result, we realize to very high efficiency power supply for PDP of 95% at 400v dc input and 550Watt output.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1318-1320
• /
• 2000

In this paper, DC/DC converter has been composed of a capacitor which has not only a source division function but a resonant function instead of a previous source division capacitor. In addition to the proposed circuit is introduced a soft switching technique (ZVS). The proposed paper certified that theoretical waveforms are equal to experiment waveforms of power, output voltage, voltage ripple etc. and to be possible to control using division ratio.