• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.423-428
• /
• 2005

If the load of constructing vehicles during the construction work acts on the road or the ground surface on the soft ground, due to the excess stresses in soils the trafficability of the vehicles influences the constructing efficiency, constructing period and so on. Stress distribution in soils is the very important element to design and to solve the problems of settlement, safety of foundations and trafficability of constructing vehicle in civil engineering. This research represents the comparative estimation of the actual and theoretical measurement on the underground stress of outer layer for each soil after the observation of each top soil layer for its vertical and horizontal stress in (1)homogeneous sand ground (2) weak stratum with the sand soil (3) weak stratum with gravel of the soil model, and it also investigates the effect of subsidence of ground by the repeated load. The underground stress turn out to be different in the value of theoretical and actual measurement after the trial examination of model.

• 한국농공학회논문집
• /
• 제47권6호
• /
• pp.47-57
• /
• 2005

Stress distribution in soils is the very important element to design and to solve the problems of settlement, safety of foundations and trafficability of constructing vehicle in civil engineering. This research presents the comparative estimation of the actual and theoretical measurement on the underground stress of outer layer for each soil after the observation of each top soil layer fur its vertical and horizontal stresses in (1) homogeneous sand ground (2) weak stratum with the sand soil (3) weak stratum with gravel of the soil model, and it also investigates the effect of subsidence of ground by the repeated load. The underground stresses fumed out to be different in the value of theoretical and actual measurement after the trial examination of model. This study has the purpose of suggesting the better construction method of running equipment on weak stratum by comparing the estimated value of trial experiment and theory on underground stress of the weak ground surface area and of raising up the necessity of the continuous research hereafter.

• 한국지형학회지
• /
• 제20권3호
• /
• pp.41-53
• /
• 2013

이 연구는 안면도 둔두리 해식애를 대상으로 주기적인 현장조사를 통해 침식율을 산정하고, 침식형태를 분류하였다. 침식기준목을 이용한 현장 측정결과, 해식애의 연간 침식율은 지점별로 약 25~102cm/yr 정도로 추정되었다. 침식율은 봄에서 여름까지 점차 증가하다가 가을에 다소 감소하는 경향을 보였다. 특히, 6~7월 사이의 침식율이 다소 감소하는 추세를 보이다가 7~9월 사이에 급격히 증가하였다. 이러한 원인은 연구지역에 직접적인 영향을 끼친 여름 집중호우 및 태풍으로 발생한 폭풍해일에 의해 해식애의 침식이 다른 기간에 비해 급격하게 진행된 것으로 판단된다. 그 후 해식애의 침식율은 가을철이 되면서 점차 감소하다 12월에서 1월이 되면 다시 증가세를 보이는데, 이는 겨울철 해식애의 기반암이 동결 융해작용을 반복하면서 기계적풍화가 활발히 진행되었기 때문인 것으로 판단된다. 둔두리 해식애의 침식 형태별 유형은 세 가지 유형으로 구분이 된다. 첫 번째 Type A의 경우 동일한 기반암 혹은 경암층으로 이루어진 해식애에서 관찰되는 유형이다. 두 번째, Type B의 경우 동일한 기반암 혹은 경암층으로 이루어진 해식애 면에 토양을 포함한 풍화물질이 형성되어 있는 비교적 Type A에 비해 경사가 완만한 해식애에서 관찰되는 유형이다. 마지막으로, Type C의 경우 경암층과 연암층이 혼재되어있는 해식애에서 관찰되는 유형으로, 강우나 파랑에너지에 의해 연암층이 먼저 붕락 및 침식되고 노출된 경암층이 추가적으로 붕락이 이루어지는 유형이다.

• 한국지반신소재학회논문집
• /
• 제11권2호
• /
• pp.49-54
• /
• 2012

연약지반 개량공사에서 최종압밀침하량은 침하관리와 준공시기를 결정하는 데 중요하다. 설계 시 점토층의 최종압밀침하량의 산정은 압축지수를 이용하는 방법이 가장 많이 이용되고 있다. 압축지수는 압밀시험으로 얻어진 하중-침하 관계를 반대수좌표에 나타냈을 때 처녀압축곡선의 기울기이다. 종래에는 압밀층 전체를 한 개의 층으로 보고 최종압밀침하량을 산정해 왔으나, 압밀층을 여러 개의 층으로 분할했을 때 얻어지는 침하량의 차이를 알아보았다. 분할층 수와 상재하중의 크기가 압밀침하량에 미치는 영향에 대하여 분석한 결과는 다음과 같다. 분할층 수가 증가할수록 침하량은 증가하여 일정한 값에 수렴하며 이러한 양상은 상재하중의 크기와 무관하게 나타났다. 상재하중이 압밀층 두께에 비해 상대적으로 작을 때는 층분할효과가 매우 크게 나타났다. 보편적인 성토하중의 경우 층분할효과는 1.2-1.4 정도로 나타났으며 이 값은 최종압밀침하량 산정 시 안전율의 의미로 사용할 수 있을 것이다.

• Structural Engineering and Mechanics
• /
• 제48권1호
• /
• pp.1-16
• /
• 2013

The seismic response of RC space frame structures with isolated footing resting on a shallow soil stratum on rock is presented in this paper. Homogeneous soil stratum of different stiffness in the very soft to stiff range is considered. Soil, footing and super structure are considered to be the parts of an integral system. A finite element model of the integrated system is developed and subjected to scaled acceleration time histories recorded during two different real earthquakes. Dynamic analysis is performed using mode superposition method of transient analysis. A parametric study is conducted to investigate the effect of flexibility of soil in the dynamic behaviour of low-rise building frames. The time histories and Fourier spectra of roof displacement, base shear and structural response quantities of the space frame on compliant base are presented and compared with the fixed base condition. Results indicate that the incorporation of soil flexibility is required for the realistic estimate of structural seismic response especially for single storey structures resting on very soft soil.

• 한국지반공학회논문집
• /
• 제26권9호
• /
• pp.71-74
• /
• 2010

암반에 근입된 현장타설말뚝 시공 시, 말뚝 선단부의 위치 및 강도는 반드시 확인되어야 한다. 그러나, 실제 현장타설말뚝의 시공 시 굴착액 등으로 인하여 선단부의 위치 및 강도 확인이 힘든 실정이다. 따라서, 본 연구에서는 현장타설말뚝 굴착장비에 간단히 부착하여 선단부 암반의 위치 및 강도를 측정할 수 있는 정적관입기를 개발하였다. 일련의 실내교정을 통하여 만들어진 정적암반관입기는 여러 현장에서 수행된 검증시험을 성공적으로 수행하였고, 이에 따라서 현장타설말뚝 선단부의 위치 및 강도 확인을 가능하게 하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.225-232
• /
• 1999

Construction case of PRD (Percussion Rotary Drill) pipe pile and matters to be attended in construction of PRD pile were reviewed. The compressive and uplifting static pile load tests for PRD piles were performed and, also, analysis by Pile Driving Analyzer was done. Based on these results, bearing components in each resisting part (that is: steel toe, external skin, and internal skin) were measured separately. The measured resisting force was compared to the value calculated by the estimated formula. The pile capacity was mobilized in steel toe area and the external skin friction and the internal friction were not produced. Thus, it could be considered that toe of PRD pile should be supported in hard bearing stratum (for example, the fresh soft rock).

• Geomechanics and Engineering
• /
• 제13권2호
• /
• pp.255-267
• /
• 2017

Soft clay strata can suffer significant settlement or stability problems under building loads. Among the methods proposed to strengthen weak soils is the application of a stone masonry trench (SMT) beneath RC strip foundations (as a masonry pad-stone). Although, SMTs are frequently employed in engineering practice; however, the effectiveness of SMTs on the ultimate bearing capacity improvement of a strip footing rested on a weak clay stratum has not been investigated quantitatively, yet. Therefore, the expected increase of bearing capacity of strip footings reinforced with SMTs is of interest and needs to be evaluated. This study presents a two-dimensional numerical model using the discrete element method (DEM) to capture the ultimate load-bearing capacity of a strip footing on a soft clay reinforced with a SMT. The developed DEM model was then used to perform a parametric study to investigate the effects of SMT geometry and properties on the footing bearing capacity with and without the presence of surcharge. The dimensions of the SMTs were varied to determine the optimum trench relative depth. The study showed that inclusion of a SMT of optimum dimension in a soft clay can improve the bearing capacity of a strip footing up to a factor of 3.5.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.49-56
• /
• 2005

The negative skin friction on piles, which are installed in currently consolidating soft deposits, creates significant problems on the stability of pile foundations. This study investigated whether or not the pile foundation designs were appropriate in soft deposits with large amount of consolidation settlement. The final settlements of the grounds along the pile depth were estimated by the soil parameters obtained from the laboratory tests and by the field-measured settlement curves, if they were available. The displacement of the piles along the pile depth was estimated by both the load transfer method and the numerical method. Both methods gave similar locations of neutral points and magnitudes of the maximum axial forces. The movements of the ground and the piles were compared to calculate the down drag acting on piles. For the piles whose bearing capacities were less than the design loads including the down drag, slip layer coatings and/or incrementing of the penetration depth into the bearing stratum were proposed to improve the piles capacities.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.139-154
• /
• 2023

Red-bed soft rock is a common stratum and it is necessary to evaluate the mechanical properties and bearing capacity of red-bed soft rock mass affected by different environmental effects. This paper presents a complete procedure for evaluating the bearing capacity of red-bed soft rock by means of geophysical exploration and in-situ rock mechanics tests. Firstly, the thickness of surface loosened rock mass of red-bed soft rock was determined using geophysical prospecting method. Then, three environmental effects, including natural weathering effect, dry-wet cycling effect and concrete sealing effect, were considered. After each effect lasted for three months, in-situ rock mass mechanical tests were conducted. The test results show that the mechanical properties of rock mass considering the sealing effect of concrete were maintained. After considering the natural weathering effect, the mechanical parameters decrease to a certain extent. After considering the effect of dry-wet cycling, the decreases of mechanical parameters are the most significant. The test results confirm that the red-bed soft rock dam foundation rock mass will be significantly affected by various environmental effects. Therefore, combined with the mechanical test results, some useful implementations are proposed for the construction of a red-bed soft rock dam foundation.