DOI QR코드

DOI QR Code

Bearing capacity of strip footings on a stone masonry trench in clay

  • 투고 : 2016.08.17
  • 심사 : 2017.05.18
  • 발행 : 2017.08.25

초록

Soft clay strata can suffer significant settlement or stability problems under building loads. Among the methods proposed to strengthen weak soils is the application of a stone masonry trench (SMT) beneath RC strip foundations (as a masonry pad-stone). Although, SMTs are frequently employed in engineering practice; however, the effectiveness of SMTs on the ultimate bearing capacity improvement of a strip footing rested on a weak clay stratum has not been investigated quantitatively, yet. Therefore, the expected increase of bearing capacity of strip footings reinforced with SMTs is of interest and needs to be evaluated. This study presents a two-dimensional numerical model using the discrete element method (DEM) to capture the ultimate load-bearing capacity of a strip footing on a soft clay reinforced with a SMT. The developed DEM model was then used to perform a parametric study to investigate the effects of SMT geometry and properties on the footing bearing capacity with and without the presence of surcharge. The dimensions of the SMTs were varied to determine the optimum trench relative depth. The study showed that inclusion of a SMT of optimum dimension in a soft clay can improve the bearing capacity of a strip footing up to a factor of 3.5.

키워드

참고문헌

  1. Asteris, P.G., Sarhosis, V., Mohebkhah, A., Plevris, V., Papaloizou, P., Komodromos P. and Lemos, J.V. (2015), Numerical Modeling of Historic Masonry Structures, In: Handbook of Research on Seismic Assessment and Rehabilitation of Historic Structures; (Edited by Panagiotis G. Asteris, V. Plevris), Chapter 7, pp. 213-256; IGI Global, USA.
  2. Bouassida, M., Jellali, B. and Lyamin, A. (2014), "Ultimate bearing capacity of a strip footing on ground reinforced by a trench", Int. J. Geomech., ASCE, 15(3), 06014021. ISSN: 1532-3641/06014021(8) DOI: 10.1061/(ASCE)GM.1943-5622.0000418
  3. Chen, W.F. (1975), Limit Analysis and Soil Plasticity, Elsevier Company, New York, NY, USA.
  4. Chen, Q. and Abu-Farsakh, M. (2015), "Ultimate bearing capacity analysis of strip footings on reinforced soil foundation", Soil Found., 55(1), 74-85. https://doi.org/10.1016/j.sandf.2014.12.006
  5. Chen, W.F. and Han, D.J. (2007), Plasticity for Structural Engineers, J. Ross Publishing, USA.
  6. Cicek, E., Guler, E. and Yetimoglu, T. (2015), "Effect of reinforcement length for different geosynthetic reinforcements on strip footing on sand soil", Soil Found., 55(4), 661-667. https://doi.org/10.1016/j.sandf.2015.06.001
  7. Como, M. (2013), Statics of Historic Masonry Constructions, Springer-Verlag Berlin Heidelberg.
  8. Cundall, P.A. (1971), "A computer model for simulating progressive large scale movements in blocky rock systems", Proceedings of the Symposium of the International Society for Rock Mechanics, Nancy, France, September.
  9. Das, B.M. (2009), Shallow Foundations: Bearing Capacity and Settlement, (2nd Ed.), CRC Press; Taylor and Francis Group, New York, NY, USA.
  10. Dash, S.K. and Bora, M.C. (2013), "Improved performance of soft clay foundations using stone columns and geocell-sand mattress", Geotext. Geomembr., 41, 26-35. https://doi.org/10.1016/j.geotexmem.2013.09.001
  11. Eurocode (2004), Eurocode 7: Geotechnical Design. Part 1: General rules; BS EN 1997-1:2004, British Standard Institute, London, UK.
  12. Hamed, J.T. (1986), "Bearing capacity of strip foundation on a granular trench in soft clay", Masters Thesis; University of Texas, Texas.
  13. Hansen, J.B. (1970), "A revised and extended formula for bearing capacity", Bulletin No. 28; Danish Geotechnical Institute, Copenhagen, Denmark.
  14. Hughes, J.M.O. and Withers, N.J. (1975), "A field trial of reinforcing effects of stone columns in soil", Geotechnique, 25(1), 31-34. https://doi.org/10.1680/geot.1975.25.1.31
  15. Itasca Consulting Group Inc. (2004), UDEC-Universal distinct element code (Version 4.0), User's manual; Minneapolis, MN, USA.
  16. Lourenco, P.B. (1996), "Computational strategies for masonry structures", Ph.D. Dissertation, Delft University of Technology, Delft, The Netherlands.
  17. Lourenco, P.B., Oliveira, D.V., Roca, P. and Orduna, A. (2005), "Dry joint masonry walls subjected to inplane combined loading", J. Struct. Eng., 131(11), 1665-1673. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:11(1665)
  18. Madhav, M.R. and Vitkar, P.P. (1978), "Strip footing on weak clay stabilized with a granular trench or pile", Can. Geotech. J., 15(4), 605-609. https://doi.org/10.1139/t78-066
  19. Milosevic, J., Gago, A.S., Lopes, M. and Bento, R. (2013), "Experimental assessment of shear strength parameters on rubble stone masonry specimens", Constr. Build. Mater., 47, 1372-1380. https://doi.org/10.1016/j.conbuildmat.2013.06.036
  20. Mir Mohammad Hosseini, S.M. and Salehi, M.M. (2015), "Evaluation of the main factors influencing the behavior of strip footings on geogrid reinforced soils", Scientia Iranica, 22(4), 1411-1421.
  21. Mohebkhah, A. and Sarv-Cheraghi, A.A. (2014), "Nonlinear analysis of unreinforced masonry buildings using distinct element method", Modares Civil Eng. J., 15(3), 85-92. [In Persian]
  22. Mohebkhah, A. and Sarhosis, V. (2016), "Discrete Element Modeling of Masonry-Infilled Frames", In Book: Computational Modeling of Masonry Structures Using the Discrete Element Method, (Edited by V. Sarhosis, K. Bagi, J.V. Lemos and G. Milani), Chapter 9, pp. 200-234; IGI Global, USA.
  23. Mohebkhah, A., Tasnimi, A.A. and Moghadam, H.A. (2008), "Nonlinear analysis of masonry-infilled steel frames with openings using discrete element method", J. Constr. Steel Res., 64(12), 1463-1472. https://doi.org/10.1016/j.jcsr.2008.01.016
  24. Nazari Afshar, J. and Ghazavi, M. (2008), "Nonlinear analysis of masonry-infilled steel frames with openings using discrete element method", Int. J. Civil Eng.; Transaction B: Geotech. Eng., 12(1), 15-25.
  25. Sarhosis, V., Tsavdaridis, K.D. and Giannopoulos, I. (2014), "Discrete element modelling (DEM) for masonry infilled steel frames with multiple window openings subjected to lateral load variations", Open Constr. Build. Technol. J., 8, 93-103. https://doi.org/10.2174/1874836801408010093
  26. Sarhosis, V., Asteris, P., Wang, T., Hu, W. and Han, Y. (2016a), "On the stability of colonnade structural systems under static and dynamic loading conditions", Bull. Earthq. Eng., 14(4), 1131-1152. https://doi.org/10.1007/s10518-016-9881-z
  27. Sarhosis, V., Asteris, P., Mohebkhah, A., Xiao, J. and Wang, T. (2016b), "Three dimensional modelling of ancient colonnade structural systems subjected to harmonic and seismic loading", Struct. Eng. Mech., Int. J., 60(4), 633-653. https://doi.org/10.12989/sem.2016.60.4.633
  28. Terzaghi, K. (1943), Theoretical Soil Mechanics, John Wiley, New York, NY, USA.
  29. Tran, V.H., Vincens, E., Morel J.C., Dedecker, F. and Le, H.H. (2014), "2D-DEM modelling of the formwork removal of a rubble stone masonry bridge", Eng. Struct., 75, 448-456. https://doi.org/10.1016/j.engstruct.2014.05.048
  30. Vasconcelos, G. (2005), "Experimental investigations on the mechanics of stone masonry: characterization of granites and behavior of ancient masonry shear walls", Ph.D. Dissertation; University of Minho, Portugal.
  31. Vesic, A.S. (1973), "Analysis of ultimate loads of shallow foundations", J. Soil Mech. Found. Div., ASCE, 99(SM1), 45-73.

피인용 문헌

  1. Axial Uplift Behaviour of Belled Piers in Coarse-Grained Saline Soils vol.2018, pp.None, 2017, https://doi.org/10.1155/2018/4735423
  2. Ultimate Bearing Capacity of Strip Foundations in Unsaturated Soils considering the Intermediate Principal Stress Effect vol.2020, pp.None, 2017, https://doi.org/10.1155/2020/8854552