• 한국지반공학회지:지반
• /
• 제10권2호
• /
• pp.109-120
• /
• 1994

해안지역에서 토류구조물을 축조하는 동안에 직면하게 되는 문제점중의 하나는 연약점토지반의 안정화 대책이다. 본 연구는 성토제체 축조시 연약점토지반의 안정화를 위하여 시멘트 개량 말뚝으로 보강된 연약지반의 거동효과를 구명하고자 원심모형실험을 수행한 것으로 서로 다른 조건에 대해서 단계 하중하에서 시간에 따른 보강지반과 비보강지반의 침하와 융기거동을 고찰하였다. 실헙결과 지반의 수직침하감수 제방에 인접한 지표면의 융기감소는 개량말뚝의 강도, 점토의 함수비 그리고 특히 개량면적비에 크게 영향을 받는 것으로나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.412-419
• /
• 2009

Large quantity of extra soils discharged from excavation site in Songdo area can be treated by hardening agents and utilized in surface stabilized layer overlying thick reclaimed soft soil deposit. Though surface layer stabilization method using cement or lime for very soft soils has been studied in recent years, but studies on moderately soft clayey silt has not been tried. The purpose of this research is to investigate optimum mixing condition for stabilizing Songdo marine soil with low plasiticity. The optimum mixing conditions of hardening agents with Songdo soil such as kind of agents, mixing ratio, initial water content and curing time are investigated by uniaxial compression test and laboratory vane test. The results indicate that strength increases with high mixing ratio and long curing time, while decreases drastically under certain water content before mixing. Finally, optimum mixing condition considering economic efficiency and workability with test results was proposed.

• 한국지반공학회논문집
• /
• 제27권5호
• /
• pp.5-15
• /
• 2011

최근 연안지역에서의 대형건설공사 증가로 인해 대규모의 연약지반처리 공사가 많이 이루어지고 있다. 이로 인해, 흙에 시멘트나 석회를 첨가하여 안정성과 내구성을 증대시키는 고화안정처리공법이 연약지반 현장의 표층처리에 빈번히 사용되고 있다. 고소성, 고압축성의 초연약 점성토를 대상으로 한 고화처리 연구는 그 동안 많이 이루어져 왔으나 상대적으로 낮은 소성성과 압축성을 가진 실트질 점성토를 대상으로 한 고화처리 연구는 찾아보기 힘들다. 따라서 본 연구에서는 송도 지역의 저소성 실트질 점성토를 배합 함수비, 개량재 배합비, 양생 기간을 변화시키며 시멘트와 생석회로 고화처리하고, 일축압축 시험 및 평판재하시험을 통하여 강도 특성을 파악하였다. 일축 압축 시험과 평판 재하 시험으로부터 상당히 일치하는 강도 특성 결과를 얻었으며, 이를 바탕으로 개량토를 매립지 표토층으로 이용하였을 경우 건설 장비의 주행성을 평가하였다. 이상의 결과로부터 송도 지역 점성토를 고화 처리하는 최적의 조건을 얻을 수 있었다.

• Geomechanics and Engineering
• /
• 제35권1호
• /
• pp.95-108
• /
• 2023

Soft soil ground is a crucial factor limiting the development of the construction of transportation infrastructure in coastal areas. Soft soil is characterized by low strength, low permeability and high compressibility. However, the ordinary treatment method uses Portland cement to solidify the soft soil, which has low early strength and requires a long curing time. Microbially induced carbonate precipitation (MICP) is an emerging method to address geo-environmental problems associated with geotechnical materials. In this study, a method of bio-cementitious mortars consisting of MICP and cement was proposed to stabilize the soft soil. A series of laboratory tests were conducted on MICP-treated and cement-MICP-treated (C-MICP-treated) soft soils to improve mechanical properties. Microscale observations were also undertaken to reveal the underlying mechanism of cement-soil treated by MICP. The results showed that cohesion and internal friction angles of MICP-treated soft soil were greater than those of remolded soft soil. The UCS, elastic modulus and toughness of C-MICP-treated soft soil with high moisture content (50%, 60%, 70%, 80%) were improved compared to traditional cement-soil. A remarkable difference was observed that the MICP process mainly played a role in the early curing stage (i.e., within 14 days) while cement hydration continued during the whole process. Micro-characterization revealed that the calcium carbonate filling the pores enhanced the soft soil.

• 한국안광학회지
• /
• 제20권2호
• /
• pp.133-140
• /
• 2015

목적: 본 연구에서는 축 안정화 디자인이 상이한 두 토릭소프트콘택트렌즈의 회전축과 회전량이 자세와 응시방향에 따라 달라지는 지를 알아보았다. 방법: 20~30대 52안을 대상으로, Lo-Torque$^{TM}$디자인 및 ASD 디자인(accelerated stabilized design) 토릭소프트콘택트렌즈를 피팅한 후 정면을 포함한 5가지 응시방향과 누운 자세에서의 회전량을 측정하였다. 결과: 정자세에서 정면 및 수직방향 응시 시 Lo-Torque$^{TM}$ 디자인 렌즈는 코쪽, ASD 디자인 렌즈는 귀쪽으로 회전하는 비율이 높은 것으로 나타났다. 수평방향 응시시에는 두 렌즈 모두 응시방향과 반대로 축회전이 일어났다. 위쪽을 응시할 때의 회전량이 가장 작았으며 코쪽을 응시할 때의 회전량이 가장 많았다. $5^{\circ}$ 이내의 회전량을 보인 경우는 정면과 수직방향을 응시할 때의 Lo-Torque$^{TM}$ 디자인 렌즈에서 더 많았으며, 수평방향 응시 시에는 ASD 디자인 렌즈에서 더 많았다. 또한, 누운 직후에는 Lo-Torque$^{TM}$ 디자인 렌즈의 회전량이 더 적었으나 1분 후에는 ASD 디자인 렌즈의 회전량이 더 적었다. 결론: 본 연구에서는 토릭소프트콘택트렌즈 착용 후 응시방향 및 자세에 의해 유발되는 축회전이 축 안정화 디자인에 따라 달라짐을 확인하였다.

• 한국안광학회지
• /
• 제15권4호
• /
• pp.339-346
• /
• 2010

목적: 정상안과 건성안에 소프트렌즈를 각각 얼라인먼트(alignment) 피팅 또는 스팁(steep) 피팅하였을 때 비침입성 눈물막 파괴 시간(non-invasive tear break-up time, NIBUT)에는 어떠한 차이를 보이는지 알아보고자 하였다. 방법: 건성안 검사방법에 따라 정상안군과 건성안군으로 분류된 20~30대 남녀 40안에 polymacon 재질의 소프트렌즈를 얼라인먼트 피팅 혹은 스팁 피팅으로 착용시킨 후 렌즈 착용 전, 착용 직후 및 눈물층이 안정화 되었을 때의 NIBUT를 측정 비교하였다. 결과: 얼라인먼트 피팅시 눈물층이 안정화되었을 때는 건성안군의 평균 NIBUT가 정상안군의 값과 차이가 없었으나, 렌즈를 착용한 직후는 통계적으로 유의한 차이가 있었다. 스팁한 피팅을 한 경우에 는 렌즈 착용 직후 건성안에서의 평균 NIBUT가 정상안에 비해 통계적으로 유의한 감소를 보였다. 또한, 스팁 피팅하였을 때는 건성안의 65%가 4초 이하의 NIBUT을 나타내어 얼라인먼트 피팅하였을 때보다 30% 가량 그 수가 증가하였다. 건성안에 스팁 피팅을 하였을 때에는 눈물층이 안정화된 후에도 NIBUT가 감소하는 경향을 나타내었다. 결론: 본 연구를 통하여 건성안의 경우 소프트렌즈의 착용시 눈물막과의 상호관계가 정상안과는 상이함을 확인할 수 있었으며, 따라서 건성안에 콘택트렌즈를 피팅할 때에는 렌즈 착용으로 인하여 야기되어질 수 있는 불안정한 눈물막 상태가 충분히 고려되어져야 할 것으로 생각되어진다.

• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.103-108
• /
• 2014

PURPOSE. The occlusal splint has been used for many years as an effective treatment of sleep bruxism. Several methods have been used to evaluate efficiency of the occlusal splints. However, the effect of the occlusal splints on occlusal force has not been clarified sufficiently. The purpose of this study was to evaluate the effect of occlusal splints on maximum occlusal force in patients with sleep bruxism and compare two type of splints that are Bruxogard-soft splint and canine protected hard stabilization splint. MATERIALS AND METHODS. Twelve students with sleep bruxism were participated in the present study. All participants used two different occlusal splints during sleep for 6 weeks. Maximum occlusal force was measured with two miniature strain-gage transducers before, 3 and 6 weeks after insertion of occlusal splints. Clinical examination of temporomandibular disorders was performed for all individuals according to the Craniomandibular Index (CMI) before and 6 weeks after the insertion of splints. The changes in mean occlusal force before, 3 and 6 weeks after insertion of both splints were analysed with paired sample t-test. The Wilcoxon test was used for the comparison of the CMI values before and 6 weeks after the insertion of splints. RESULTS. Participants using stabilization splints showed no statistically significant changes in occlusal force before, 3, and 6 weeks after insertion of splint (P>.05) and participants using Bruxogard-soft splint had statistically significant decreased occlusal force 6 weeks after insertion of splint (P<.05). There was statistically significant improvement in the CMI value of the participants in both of the splint groups (P<.05). CONCLUSION. Participants who used Bruxogard-soft splint showed decreases in occlusal force 6 weeks after insertion of splint. The use of both splints led to a significant reduction in the clinical symptoms.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.499-506
• /
• 2004

The use of dredged soft marine clay is increasing due to a shortage of coarse material available. This paper presents a stabilization method that can increase shear strength of the surface layer of a dredged clay deposit at dates much earlier than usual. The desiccation of the upper soft 1-2m layer can be accelerated by interrupting water seeping from its bottom with impervious geotextile. Just below the geotextile, enough pervious material is provided so that the underlying deposit can be drained through it. This scheme is proved to be effective through theoretical analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.428-437
• /
• 2006

This paper attempts to derive and analyze the dynamic system of grasping a rigid object by means of two multi-degrees-of-freedom robot flngers with soft and deformable tips. It is shown firstly that a set of differential equation describing dynamics system of the manipulators and object together with geometric constraint of tight area-contacts is formulated by Lagrange's equation. It is shown secondly that the problems of controlling both the forces of pressing object and the rotation angle of the object under the geometric constraints are discussed. In this paper. the control method for dynamic stable grasping and enhancing dexterity in manipulating things is proposed. It is illustrated by computer simulation that the control system gives the performance improvement in the dynamic stable grasping of the dual fingers robot with soft tips.

• 대한족부족관절학회지
• /
• 제15권2호
• /
• pp.51-57
• /
• 2011

Pilon fractures involving distal tibia remain one of the most difficult therapeutic challenges that confront the orthopedic surgeons because of associated soft tissue injury is common. To introduce and describe the diagnosis, current treatment, results and complications of the pilon fractures. In initial assessment, the correct evaluation of the fracture type through radiographic checkup and examination of the soft tissue envelope is needed to decide appropriate treatment planning of pilon fractures. Even though Ruedi and Allgower reported 74% good and excellent results with primary open reduction and internal fixation, recently the second staged treatment of pilon fractures is preferred to orthopedic traumatologist because of the soft tissue problem is common after primary open reduction and internal fixation. The components of the first stage are focused primarily on stabilization of the soft tissue envelope. If fibula is fractured, fibular open reduction and internal fixation is integral part of initial management for reducing the majority of tibial deformities. Ankle-spanning temporary external fixator is used to restore limb alignment and displaced intraarticular fragments through ligamentotaxis and distraction. And the second stage, definitive open reduction and internal fixation of the tibial component, is undertaken when the soft tissue injury has resolved and no infection sign is seen on pin site of external fixator. The goals of definitive internal fixation should include absolute stability and interfragmentary compression of reduced articular segments, stable fixation of the articular segment to the tibial diaphysis, and restoration of coronal, transverse, and sagittal plane alignments. The location, rigidity, and kinds of the implants are based on each individual fractures. The conventional plate fixation has more advantages in anatomical reduction of intraarticular fractures than locking compression plate. But it has more complications as infection, delayed union and nonunion. The locking compression plate fixation provides greater stability and lesser wound problem than conventional implants. But the locking compression plate remains poorly defined for intraarticular fractures of the distal tibia. Active, active assisted, passive range of motion of the ankle is recommended when postoperative rehabilitation is started. Splinting with the foot in neutral is continued until suture is removed at the 2~3 weeks and weight bearing is delayed for approximately 12 weeks. The recognition of the soft tissue injury has evolved as a critical component of the management of pilon fractures. At this point, the second staged treatment of pilon fractures is good treatment option because of it is designed to promote recovery of the soft tissue envelope in first stage operation and get a good result in definitive reduction and stabilization of the articular surface and axial alignment in second stage operation.