• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.527-528
• /
• 2006

In this paper, we propose an IP design and implementation of System on a chip(SoC) for Discrete Cosine Transform (DCT) and Discrete Wavelet Transform (DWT) processor using adder-based DA(Adder-based Distributed Arithmetic). To reduced hardware cost and to improve operating speed, the combined DCT/ DWT processor used the bit-serial method and DA module. The transform of coefficient equation result in reduction in hardware cost and has a regularity in implementation. We use Verilog-HDL and Xilinx ISE for simulation and implement FPGA on SoCMaster-3.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.28-37
• /
• 2010

In this paper, the IC (Integrated Circuit) for multi-channel asynchronous communication was designed by using FPGA and VHDL language. The existing chips for asynchronous communication that has been used commercially are composed of one to two channels. Therefore, when communication system with two channels or more is made, the cost becomes high and it becomes complicated for communication system to be realized and also has very little buffer, load that is placed into Microprocessor increases heavily in case of high speed communication or transmission of high-capacity data. The designed IC was improved the function and performance of communication system and reduced costs by designing 8 asynchronous communication channels with only one IC, and it has the size of transmitter/receiver buffer with 256 bytes respectively and consequently high speed communication became possible. To detect errors between communications, it was designed with digital filter and check-sum logic and channel MUX logic so that the malfunction can be prevented and errors can be detected more easily and input/output port regarding each communication channel can be used flexibly and consequently the reliability of system was improved. It was composed and simulated logic of VHDL described by using Cyclone II Series EP2C35F672C8 and QuartusII V8.1 of ALTERA company. In order to show the performance of designed IC, the test was conducted successfully in QuartusII simulation and experiment and the excellency was compared with TL16C550A of TI (Texas Instrument) company and ATmegal28 general-purpose micro controller of ATMEL company that are used widely as chips for asynchronous communication.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.649-652
• /
• 2013

LEON3 is a 32-bit synthesisable processor based on the SPARC V8. It can be connected to AMBA 2.0 bus and has a 7-stage pipeline, IEEE-754 FPU and 256[KB] cache. It can be easily implemented using FPGA and used for a SoC design. DSU which comes with LEON3 can be used to control and monitor the operation of LEON3. And DSU makes it easy to set a debugging environment for the development of both hardware and software for an embedded systems based on LEON3. This paper presents the summary of the development of LEON3 monitoring software.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.388-390
• /
• 2006

This paper presents a hybrid SoC design for phase detection of single tone signal. The designed hybrid SoC is composed of three functional blocks, i.e., an analog to digital converter module, a phase detection module and a controller module. A design of the controller module is based on a 16-bit RISC architecture. An I/O interface and an LCD control interface for transmission and display of phase measurement values are included in the design of the controller module. A design of the phase detector is based on a recursive sliding-DFT. The recursive architecture effectively reduces the gate numbers required in the implementation of the module. The ADC module includes a single-bit second-order sigma-delta modulator and a digital decimation filter. The decimation filter is designed to give 98dB of SNR for the ADC. The effective resolution of the ADC is enhanced to 98dB of SNR by the incorporation of a pre FIR filter, a 2-stage cascaded integrator- comb(CIC) filter and a 30-tab FIR filter in the decimation. The hybrid SoC is verified in FPGA and implemented in 0.35 CMOS Technology.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.6
• /
• pp.353-357
• /
• 2014

This paper, presents an efficient hardware architecture of high performance SVC(Scalable Video Coding). This platform uses dedicated hardware architecture to improve its performance. The architecture was prototyped in Verilog HDL and synthesized using the Synopsys Design Compiler with a 65nm standard cell library. At a clock frequency of 266MHz, This platform contains 2,500,000 logic gates and 750,000 memory gates. The performance of the platform is indicated by 30 frames/s of the SVC encoder Full HD($1920{\times}1080$), HD($1280{\times}720$), and D1($720{\times}480$) at 266MHz.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.1
• /
• pp.39-47
• /
• 2016

In this paper, we propose vehicle SoC fault diagnosis platform using FlexRay protocol in order to detect the faults of semiconductor control chip even after vehicle production. Before FlexRay protocol by sending NFI (Null Frame Indicator) bit among the header segment and a specific identifier in the payload segment of FlexRay frame, this technique can be distinguishable from normal mode and test mode. By using this technique, it is possible to detect the faults such as performance degradation of vehicle network system caused by the aging or several problems of vehicle semiconductor chip. Also high reliability and safety of vehicle can be maintained by using structural test for vehicle SoC fault detection.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.1525-1527
• /
• 2013

본 논문에서는 저시력자의 개선된 독서 환경을 제공하는 시각보조기기를 위한 실시간 영상처리 SoC(System on Chip) 하드웨어 구조 설계에 대해서 기술한다. 기존의 시각보조기기는 화면 영상이 실제 움직임보다 늦게 출력되는 잔상 현상이 발생하며, 색 변환 기능도 제한적이다. 따라서 본 논문에서 제안하는 실시간 영상처리 SoC 하드웨어 구조는 데이터 연산을 최소화함으로써 잔상 현상이 감소되며, 저시력자를 위한 다양한 색상 모드를 지원한다. 제안하는 영상처리 SoC 하드웨어 구조는 Core-A 모듈, Memory Controller 모듈, AMBA AHB bus 모듈, ISP(Image Signal Processing) 모듈, TFT-LCD Controller 모듈, VGA Controller 모듈, CIS Controller 모듈, UART 모듈, Block Memory 모듈로 구성된다. 시각보조기기를 위한 실시간 영상처리 SoC 하드웨어 구조는 Virtex4 XC4VLX80 FPGA 디바이스를 이용하여 검증하였으며, TSMC 180nm 셀 라이브러리로 합성한 결과 동작주파수는 54MHz, 게이트 수 197k이다.

• KIISE Transactions on Computing Practices
• /
• v.23 no.2
• /
• pp.97-103
• /
• 2017

Many hardware-based regular expression matching architectures have been proposed for high-performance matching. In particular, regular expression processors, which perform pattern matching by treating the regular expressions as the instruction sequence like general purpose processors, have been proposed. After instruction sequence and data are provided in the instruction memory and data memory, respectively, a regular expression processor can perform pattern matching. To use a regular expression processor as a coprocessor, we need the host interface to transfer the instruction and data into the memory of a regular expression processor. In this paper, we design and implement the host interface between a host and a regular expression processor in the DE1-SoC board and the application program interface. We verify the operations of the host interface and a regular expression processor by executing the application programs which perform pattern matching using the application program interface.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.4
• /
• pp.73-79
• /
• 2007

In this paper the proposed transactor is customized and a generator which roles of automatically generating the transactor according to DUT(Design Under Test)'s input and output is implemented. The customized transactor is designed by rearranging the signals of depending on DUT and transactor protocol which consists of signals of the PCI interface between host computer and FPGA(Field Programmable Gate Array). The implemented automatic generator of transactor generates a Verilog code of transactor by adding DUT's information about input and output ports. Performance and normal working of the generated transactor has been verified by experiments with some verified hardware IPs. Also, an efficiency of the transactor has been verified by comparing with user's manually designed transactor and generated transactor. Moreover, the generator's flexibility has been verified for DUT's information of variable input and output. In case of using the implemented generator, a design time of transactor is reduced.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.8
• /
• pp.1250-1256
• /
• 2017

In this research, a high-performance ultrasonic positioning system is proposed to track the positions of an indoor mobile object. Composed of an ultrasonic sender (mobile object) and a receiver (anchor), the system employs three ultrasonic time-off-flights (TOFs) and trilateration to estimate the positions of the object with an accuracy of sub-centimeter. On the other hand, because ultrasonic waves are interfered by temperature, wind and various obstacles obstructing the propagation while propagating in air, ultrasonic pulse debounce technique and Kalman filter were applied to TOF and position calculation, respectively, to compensate for the interference and to obtain more accurate moving object position. To perform tasks in real time, ultrasonic signals are processed full-digitally with a Zynq SoC, and as a software design tool, Vivado IDE(integrated design environment) is used to design the whole signal processing system in hierarchical block diagrams. And, a hardware/software co-design is implemented, where the digital circuit portion is designed in the Zynq's fpga and the software portion is c-coded in the Zynq's processors by using the baremetal multiprocessing scheme in which the c-codes are distributed to dual-core processors, cpu0 and cpu1. To verify the usefulness of the proposed system, experiments were performed and the results were analyzed, and it was confirmed that the moving object could be tracked with accuracy of sub-cm.