• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1594-1611
• /
• 2008

Level of Service(LOS) is classified A through F in highway system (KHCM), usually using LOS C in express way and D in national road. (LOS C denotes 75% of capacity) Meanwhile in Railroad System, there is no clearly defined LOS, and the daily demand in infra-structure planning has been used. It is very important that LOS provides consequently a consensus of opinion between users and operators because there is a close relation between user demand and level of services. Considering this, there should exist clearly defined Level of Services in Railroad System Planning so that demand can be predicted precisely.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2230-2234
• /
• 2003

This paper proposes a distributed simulator for general control system in CEMTool. Systems can be described by SIMTool likes the simulink in Matlab. For distributed simulation, we can seperate any system into several parallel subsystems in SIMTool. The number of parallel subsystem can be determined by the system's property. After seperation, parallel simulator will do initialization, one-step-ahead simulation, block-distribution and ordering and so on. Finally, simulator will create independent C codes and executive files for each subsystem. The whole system is fulfilled by several PCs, and each PC executes one subsystem. There are communications among these subsystem using reflective memory or ethernet. We have made several experiments, and the 5-stand cold rolling mill control system is our main target. The result of parallel simulation has shown effective speedup in comparison with one pc simulation.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.11a
• /
• pp.152-156
• /
• 2000

Many industrial equipments use RS-232C interface. But Ethernet using CSMA/CD was widly spread recently. This interface is not compatible with RS-232C and requires PC based system. So In this Paper, We decribe a Internet control and monitoring system that control and watch plants without PC. We developed IP controller consisted of microprocessor and NIC and monitoring system using VC++ and SQL database. The protocol used this system is UDP/IP because it is applicable for real time system.

• Journal of Aerospace System Engineering
• /
• v.8 no.2
• /
• pp.33-39
• /
• 2014

Feathering spindle is one of the critical parts of the rotor system in the Smart Unmanned Aerial Vehicle(SUAV) that it was manufactured with special material, Maraging C300. During the initial ground and tie-down flight tests of the SUAV, surface of the feathering spindle contacting to the needle-roller bearings showed excessive wear and dent due to high vibrating loads transferred from the rotating blades. Gas nitriding process was applied to the bearing contact surface of the feathering spindle to increase surface hardness so as to improve the surface defects. This paper briefly presents the gas nitriding process adopted and the spindle quality improvements including wear and corrosion resistance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.10e
• /
• pp.76-78
• /
• 2002

Multicasting over mobile IP network becomes more important with the increasing needs of supporting multimedia services in mobile network. The IETF has suggested two approaches which are remote subscription and bidirectional tunneling for supporting mobility management in multicasting over mobile IP. But these protocols have problems - the frequent reconstruction of multicast delivery tree, packet less during handoff, convergence problem, and so on. In this paper, we propose to use preconfiguration of multicast delivery tree when mobile host enters the foreign network. It will decrease the frequency of multicast delivery tree reconstruction, and reduce the packet loss during handoff, Also the multicast delivery tree maintained by Keep Alive messages makes the signaling overload of networks diminished.

• The KIPS Transactions:PartA
• /
• v.15A no.1
• /
• pp.61-68
• /
• 2008

In this paper, we propose the VLSI design of Multi-Format Video Decoder (MFD) to support video codec standards such as MPEG-2, MPEG-4, H.264 and VC-1. The target of the proposed MFD is the Full HD (High Definition) video processing needed for the high-end D-TV SoC (System-on-Chip). The size of the design is reduced by sharing the common large-size resources such as the RISC processor and the on-chip memory among the different codecs. In addition, a detachable architecture is introduced in order to easily add or remove the codecs. The detachable architecture preserves the stability of the previously designed and verified codecs. The size of the design is about 2.4 M gates and the operating clock frequency is 225MHz in the Samsung 65nm process. The proposed MFD supports more than Full-HD (1080p@30fps) video decoding, and the largest number of video codec standards known so far.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.460-462
• /
• 1998

In this study, we deal with a multivariable system which its input and output are coupled. This study presents a method for designing a controller which allows a coupled system to be transformed to a decoupled system in a standard model adopting 2DOF controller. And Wiener-Hopf($H_2$) approach is used so that the designed controller can minimize given cost function.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.3
• /
• pp.121-131
• /
• 2003

This study centers on how the electronic democracy which is expected to be a political system of information society may increase civic participation and develop political system. On the other hand, critics of internet voting claim that the technology required to properly authenticate voters and assure the accuracy and integrity of the election system either does not exist or is not widespread enough in society to be equitable and effective. In order to capture the potential that this new technology offers, it must be implemented correctly, upon a well-conceived framework of standards and procedures. At the same time, government must seek the advice of industry leaders as well as social activists so as to avoid the many obstacles that will undoubtedly arise.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.4
• /
• pp.254-260
• /
• 2009

Most commercial PDM (product data management) systems, which have been released recently by overseas famous software vendors, are still expensive and heavy to apply to small and medium enterprises (SMEs). Proposed in this paper are an architecture and functions of collaborative BOM (bill-of-material) management system (cBOM-MS) which supports the internal BOM management by BOM Navigator, provides SMEs with constructing the collaborative BOM via Collaborative BOM Portal, and proposes an interface to extract BOM automatically from commercial CAD systems. In the design of cBOM-MS, BOM Navigator and cBOM Portal are positioned separately to reinforce the information security about product data during product development process.

• Annual Conference of KIPS
• /
• 2007.11a
• /
• pp.779-781
• /
• 2007

Nowadays, as the increasing functionality and scales of embedded systems, system design grows more complex than before. So verification and simulation of systems become an important facet in hardware-software co-design issues. But it is almost impossible to simulate an embedded system without real hardware implementation or environment communication, especially for control-dominated reactive systems. Therefore, in this paper, we will introduce a GUI environment module generator for integrated Esterel\C++ simulation. By generating the GUI modeling environment, we can simulate and verify the whole embedded system conveniently.